Stepping Motors

?* Information on days to ship and prices

• 

  Built-in Controller Stepping Motor "SSA-TR Series"

  SHINANO KENSHI

  <Features>
  ● An input pulse is not required as the motor, driver and controller are integrated into the motor flange size.
  ● It is easy to set the operation with the included dedicated application.
  ● Various operations can be programmed in 8 tables.
  ● Micro step division (1, 2, 4, 16) selectable from 4 levels.
  ● Design with special bracket for high heat dissipation.
  <Applications>
  ● Equipment for all types of factories (manufacturing/assembly equipment, inspection equipment, experimental equipment, transportation equipment, etc.), positioning and constant rotation control.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	197.39 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Stepping Motor for Units

  ORIENTAL MOTOR

  This is a single motor (component) of the stepper motor unit.

  Select to compare

  Configure now
  Starting from∗ ：	241.03 €
  Min. Shipping Days ：	18 Days

  *Unit price with basic configuration

• 

  Stepper Motor, AZ Series

  ORIENTAL MOTOR

  [Features]
  ・ Equipped with a newly developed ABZO sensor
  ・ No external sensor required
  ・ Reduction of origin return time
  ・ No battery required
  ・ Energy saving and low heat generation
  ・ Three drivers to choose from to match your system configuration
  ・ Easy operation that can be realized with the data setting software MEXE02

  Select to compare

  Configure now
  Starting from∗ ：	312.42 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  Stepper motors (85000)

  NORELEM

  · Size acc. to NEMA
  
  · High increment angle accuracy of 1.8°
  
  · With wire connection
  
  · Up to 50 °C ambient temperature without forced ventilation
  
  · High efficiency ratio

  Select to compare

  Configure now
  Starting from∗ ：	113.13 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Step Motor Controller, JXCE1 / 91 / P1 / D1 / L1 Series

  SMC

  · EtherCAT, PROFINET, EtherNet/IPTM, DeviceNetTM and IO-Link compatible.
  · Compatible actuators: LEY/LEYG, LEFS/LEFB, LES/LESH, LER, LEL, LEP, LEH, LEM.
  · Dual communication port IN/OUT (not for JXCL1. For JXCD1, transition wiring is possible using a branch connector).
  · Two types of operation command: step no. defined operation and numerical data defined operation.

  Select to compare

  Configure now
  Starting from∗ ：	404.06 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Servo Screwdriver & Stepper Motor Set CSB-BZ Series

  SHINANO KENSHI

  
  ● Closed loop servo drive
  ● Low noise, low vibration, and low heat generation across the entire speed range
  ● Thin DIN rail mounted driver
  ● 4-stage resolution settings (500, 1,000, 5,000, 10,000 p/r)
  ● Various Protection Functions
  ● Input Power Supply: 24 VDC
  ● The speed filter enables smooth acceleration and deceleration
  ● Easy 6-stage gain settings

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	489.80 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Microstep Driver Integrated Controller and Stepping Motor Set CSA-UP Series

  SHINANO KENSHI

  Various operations can be programed in 8 tables
  
  [Features]
  · Integrated controller function for small and lightweight drivers.
  · Various operations can be programed in 8 tables.
  · 4 levels of micro step division (1, 2, 4, 16) selectable.
  · Home return operation possible with origin sensor input.
  · Easy setting with the included dedicated application.
  · Input power supply: DVC24V.
  Error output function.
  · Abundant protection functions (excess heating, voltage and current).

  Select to compare

  Configure now
  Starting from∗ ：	218.09 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Built-in Speed Controller Stepping Motor "SSA-VR Series"

  SHINANO KENSHI

  <Features>
  ● An input pulse is not required as the motor, driver and speed controller are integrated into the motor flange size.
  ● Operation parameters, I/O function setting and demo operation are possible with the included dedicated application.
  ● Abnormal rotation detection and automatic recovery are possible with the motor alone.
  ● Speed control is made simple with analog input.
  ● Wide speed control range (0 to 1800r/min).
  <Applications>
  ● Equipment for all types of factories (manufacturing/assembly equipment, inspection equipment, experimental equipment, transportation equipment, etc.) and constant rotation control.

  Select to compare

  Configure now
  Starting from∗ ：	257.47 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  5-Phase Micro step driver and stepping motor set CSA-UB series

  SHINANO KENSHI

  5 phase equivalency at with 2 phases at low cost
  
  [Features]
  · 2 phase motor achieving resolution equivalent to a 5 phase motor at low cost.
  · A maximum 25,600 divisions per revolution (minimum step angle: 0.0140625°).
  · Choose from 16 levels (1 to 128).
  · 16 step current setting: 0 to 3.0A (Max).
  · With forward rotation / reverse rotation limit input.
  · Auto power down function

  Select to compare

  Configure now
  Starting from∗ ：	171.17 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  High output micro step driver and stepping motor set CSA-BB series

  SHINANO KENSHI

  Maximum high output: 48V, 6A
  
  [Features]
  · Maximum input voltage 48V, high power micro step driver with 6A maximum current.
  · A maximum 3,200 divisions per revolution (minimum step angle: 0.1125°).
  · Choose from 5 levels (1, 2, 4, 8, 16).
  · 16 step current setting: 0 to 6A (Max).
  · Stop current setting function.
  · Protection function (excess heat and voltage protection).

  Select to compare

  Configure now
  Starting from∗ ：	179.47 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Controller Built-in Microstepping Driver & Stepper Motor Set, CSA-UP With Power Supply Unit

  SHINANO KENSHI

  Various operations can be programed in 8 tables
  
  [Features]
  · Integrated controller function for small and lightweight drivers.
  · Various operations can be programed in 8 tables.
  · 4 levels of micro step division (1, 2, 4, 16) selectable.
  · Home return operation possible with origin sensor input.
  · Easy setting with the included dedicated application.
  · Input power supply: DC24V.
  · Error output function.
  · Abundant protection functions (excess heating, voltage and current).

  Select to compare

  Configure now
  Starting from∗ ：	281.92 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Two-shaft simultaneous drive speed controller and stepping motor two-unit set CSA-UT series

  SHINANO KENSHI

  [Features]
  · Simultaneous 2 motors operation with one controller.
  · Oscillator (pulse generator) built in.
  · All motor operations can be set at numeric values.
  · Equipped with 2 speed setting function (internal setting value / external analog input).
  · Rotation speed: 1 to 1,800r/min, 1r/min may not reach maximum speed depending on the type of motor setting unit, (1,800r/min)
  · Acceleration / deceleration setting: 0 to 99.99 seconds.
  · Current setting: 0 to 2.00A.
  · Continuous reciprocating rotation.
  · Stall detection function (input feedback time).
  · Lightweight and compact design: W70XH90XD33 mm, 190 g.

  Select to compare

  Configure now
  Starting from∗ ：	331.30 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  2-Axis Simultaneous Drive Speed Controller & Stepper Motor 2-Unit Set, CSA-UT Series With Power Supply Unit

  SHINANO KENSHI

  [Features]
  · Simultaneous 2 motors operation with one controller.
  · Oscillator (pulse generator) built in.
  · All motor operations can be set at numeric values.
  · Equipped with 2 speed setting function (internal setting value / external analog input).
  · Rotation speed: 1 to 1,800 r/min,1 r/min setting unit.
  · Acceleration / deceleration setting: 0 to 99.99 seconds.
  · Current setting: 0 to 2.00A.
  · Continuous reciprocating rotation.
  · Stall detection function (input feedback time).
  · Lightweight and compact design: W70 × H90 × D33 mm, 190 g.

  Select to compare

  Configure now
  Starting from∗ ：	393.69 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Stepper motors with integrated positioning control (85000-10)

  NORELEM

  · Size acc. to NEMA
  
  · High increment angle accuracy of 1.8°
  
  · With integrated positioning control
  
  · Up to 50 °C ambient temperature without forced ventilation
  
  · High efficiency ratio

  Select to compare

  Configure now
  Starting from∗ ：	891.11 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...