Stepping Motors（Voltage Specifications：DC Specifications）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Stepping Motor for Units
ORIENTAL MOTOR
This is a single motor (component) of the stepper motor unit.Configure nowStarting from∗ ： 241.03 € Min. Shipping Days ： 18 Days *Unit price with basic configuration
-
Built-in Controller Stepping Motor "SSA-TR Series"
SHINANO KENSHI
<Features>
● An input pulse is not required as the motor, driver and controller are integrated into the motor flange size.
● It is easy to set the operation with the included dedicated application.
● Various operations can be programmed in 8 tables.
● Micro step division (1, 2, 4, 16) selectable from 4 levels.
● Design with special bracket for high heat dissipation.
<Applications>
● Equipment for all types of factories (manufacturing/assembly equipment, inspection equipment, experimental equipment, transportation equipment, etc.), positioning and constant rotation control.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 197.39 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Stepper Motor, AZ Series
ORIENTAL MOTOR
[Features]
・ Equipped with a newly developed ABZO sensor
・ No external sensor required
・ Reduction of origin return time
・ No battery required
・ Energy saving and low heat generation
・ Three drivers to choose from to match your system configuration
・ Easy operation that can be realized with the data setting software MEXE02Configure nowStarting from∗ ： 312.42 € Min. Shipping Days ： 13 Days *Unit price with basic configuration
-
Servo Screwdriver & Stepper Motor Set CSB-BZ Series
SHINANO KENSHI
● Closed loop servo drive
● Low noise, low vibration, and low heat generation across the entire speed range
● Thin DIN rail mounted driver
● 4-stage resolution settings (500, 1,000, 5,000, 10,000 p/r)
● Various Protection Functions
● Input Power Supply: 24 VDC
● The speed filter enables smooth acceleration and deceleration
● Easy 6-stage gain settings- 2D / 3D CAD data available
Configure nowStarting from∗ ： 489.80 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Stepper motors (85000)
NORELEM
· Size acc. to NEMA
· High increment angle accuracy of 1.8°
· With wire connection
· Up to 50 °C ambient temperature without forced ventilation
· High efficiency ratioConfigure nowStarting from∗ ： 113.13 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Built-in Speed Controller Stepping Motor "SSA-VR Series"
SHINANO KENSHI
<Features>
● An input pulse is not required as the motor, driver and speed controller are integrated into the motor flange size.
● Operation parameters, I/O function setting and demo operation are possible with the included dedicated application.
● Abnormal rotation detection and automatic recovery are possible with the motor alone.
● Speed control is made simple with analog input.
● Wide speed control range (0 to 1800r/min).
<Applications>
● Equipment for all types of factories (manufacturing/assembly equipment, inspection equipment, experimental equipment, transportation equipment, etc.) and constant rotation control.Configure nowStarting from∗ ： 257.47 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
5-Phase Micro step driver and stepping motor set CSA-UB series
SHINANO KENSHI
5 phase equivalency at with 2 phases at low cost
[Features]
· 2 phase motor achieving resolution equivalent to a 5 phase motor at low cost.
· A maximum 25,600 divisions per revolution (minimum step angle: 0.0140625°).
· Choose from 16 levels (1 to 128).
· 16 step current setting: 0 to 3.0A (Max).
· With forward rotation / reverse rotation limit input.
· Auto power down functionConfigure nowStarting from∗ ： 171.17 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
High output micro step driver and stepping motor set CSA-BB series
SHINANO KENSHI
Maximum high output: 48V, 6A
[Features]
· Maximum input voltage 48V, high power micro step driver with 6A maximum current.
· A maximum 3,200 divisions per revolution (minimum step angle: 0.1125°).
· Choose from 5 levels (1, 2, 4, 8, 16).
· 16 step current setting: 0 to 6A (Max).
· Stop current setting function.
· Protection function (excess heat and voltage protection).Configure nowStarting from∗ ： 179.47 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Stepper motors with integrated positioning control (85000-10)
NORELEM
· Size acc. to NEMA
· High increment angle accuracy of 1.8°
· With integrated positioning control
· Up to 50 °C ambient temperature without forced ventilation
· High efficiency ratioConfigure nowStarting from∗ ： 891.11 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Microstep Driver Integrated Controller and Stepping Motor Set CSA-UP Series
SHINANO KENSHI
Various operations can be programed in 8 tables
[Features]
· Integrated controller function for small and lightweight drivers.
· Various operations can be programed in 8 tables.
· 4 levels of micro step division (1, 2, 4, 16) selectable.
· Home return operation possible with origin sensor input.
· Easy setting with the included dedicated application.
· Input power supply: DVC24V.
Error output function.
· Abundant protection functions (excess heating, voltage and current).Configure nowStarting from∗ ： 218.09 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Controller Built-in Microstepping Driver & Stepper Motor Set, CSA-UP With Power Supply Unit
SHINANO KENSHI
Various operations can be programed in 8 tables
[Features]
· Integrated controller function for small and lightweight drivers.
· Various operations can be programed in 8 tables.
· 4 levels of micro step division (1, 2, 4, 16) selectable.
· Home return operation possible with origin sensor input.
· Easy setting with the included dedicated application.
· Input power supply: DC24V.
· Error output function.
· Abundant protection functions (excess heating, voltage and current).Configure nowStarting from∗ ： 281.92 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Two-shaft simultaneous drive speed controller and stepping motor two-unit set CSA-UT series
SHINANO KENSHI
[Features]
· Simultaneous 2 motors operation with one controller.
· Oscillator (pulse generator) built in.
· All motor operations can be set at numeric values.
· Equipped with 2 speed setting function (internal setting value / external analog input).
· Rotation speed: 1 to 1,800r/min, 1r/min may not reach maximum speed depending on the type of motor setting unit, (1,800r/min)
· Acceleration / deceleration setting: 0 to 99.99 seconds.
· Current setting: 0 to 2.00A.
· Continuous reciprocating rotation.
· Stall detection function (input feedback time).
· Lightweight and compact design: W70XH90XD33 mm, 190 g.Configure nowStarting from∗ ： 331.30 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
2-Axis Simultaneous Drive Speed Controller & Stepper Motor 2-Unit Set, CSA-UT Series With Power Supply Unit
SHINANO KENSHI
[Features]
· Simultaneous 2 motors operation with one controller.
· Oscillator (pulse generator) built in.
· All motor operations can be set at numeric values.
· Equipped with 2 speed setting function (internal setting value / external analog input).
· Rotation speed: 1 to 1,800 r/min,1 r/min setting unit.
· Acceleration / deceleration setting: 0 to 99.99 seconds.
· Current setting: 0 to 2.00A.
· Continuous reciprocating rotation.
· Stall detection function (input feedback time).
· Lightweight and compact design: W70 × H90 × D33 mm, 190 g.Configure nowStarting from∗ ： 393.69 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Type |
| Square flange dimensions A(mm) |
| Power Supply |
| Voltage Specifications |
| Control method |
| Step angle(°) |
| Holding torque (classification)(N·m) |
| Reduction Gear |
| Driving mode |
| Backlash(°) |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ORIENTAL MOTOR | SHINANO KENSHI | ORIENTAL MOTOR | SHINANO KENSHI | NORELEM | SHINANO KENSHI | SHINANO KENSHI | SHINANO KENSHI | NORELEM | SHINANO KENSHI | SHINANO KENSHI | SHINANO KENSHI | SHINANO KENSHI |
| Product Series | 5-Phase Micro step driver and stepping motor set CSA-UB series | High output micro step driver and stepping motor set CSA-BB series | Stepper motors with integrated positioning control (85000-10) | Microstep Driver Integrated Controller and Stepping Motor Set CSA-UP Series | Controller Built-in Microstepping Driver & Stepper Motor Set, CSA-UP With Power Supply Unit | Two-shaft simultaneous drive speed controller and stepping motor two-unit set CSA-UT series | |||||||
| CAD |
|
| |||||||||||
| Starting from∗ | 241.03 € *Unit price with basic configuration | 197.39 € *Unit price with basic configuration | 312.42 € *Unit price with basic configuration | 489.80 € *Unit price with basic configuration | 113.13 € *Unit price with basic configuration | 257.47 € *Unit price with basic configuration | 171.17 € *Unit price with basic configuration | 179.47 € *Unit price with basic configuration | 891.11 € *Unit price with basic configuration | 218.09 € *Unit price with basic configuration | 281.92 € *Unit price with basic configuration | 331.30 € *Unit price with basic configuration | 393.69 € *Unit price with basic configuration |
| Min. Shipping Days | 18 Days | 8 Days | 13 Days | 8 Days | 4 Days | 8 Days | 8 Days | 8 Days | 4 Days | 8 Days | 8 Days | 8 Days | 8 Days |
| Type | Motor Unit | Motor / Set Product | Driver Unit / Motor Unit | Set Product | Motor | Motor | Set Product | Set Product | Motor | Set Product | Set Product | Set Product | Set Product |
| Square flange dimensions A(mm) | 60 | 28 ～ 60 | 60 | 42 ～ 60 | - | 42 ～ 56.4 | 28 ～ 60 | 42 ～ 86 | - | 28 ～ 60 | 28 ～ 60 | 28 ～ 42 | 28 ～ 60 |
| Power Supply | - | Two-phase | Single-Phase | Two-phase | Two-phase | Two-phase | Two-phase | Two-phase | Two-phase | Two-phase | Two-phase | Two-phase | Two-phase |
| Voltage Specifications | DC Specifications | DC Specifications | DC Specifications | DC Specifications | DC Specifications | DC Specifications | DC Specifications | DC Specifications | DC Specifications | DC Specifications | DC Specifications | DC Specifications | DC Specifications |
| Control method | Open loop | Open loop | Closed Loop | Closed Loop | - | Open loop | - | - | - | Open loop | Open loop | Open loop | Open loop |
| Step angle(°) | 0.36 | 0.18 ～ 1.8 | 0.36 | - | 1.8 | 0.18 ～ 1.8 | 1.8 | 1.8 | - | 1.8 | 1.8 | - | - |
| Holding torque (classification)(N·m) | Up to 2 | 0.1 or Less ～ Up to 0.9 | Up to 0.3 ～ Up to 15 | Up to 0.4 ～ Up to 1.3 | - | Up to 0.9 | 0.1 or Less ～ Up to 3 | Up to 0.3 ～ Up to 10 | - | 0.1 or Less ～ Up to 3 | 0.1 or Less ～ Up to 3 | Up to 0.2 ～ Up to 0.5 | 0.1 or Less ～ Up to 3 |
| Reduction Gear | N/A | N/A / Available | N/A / Available | N/A | - | N/A / Available | N/A | N/A | - | N/A / Available | N/A / Available | N/A | N/A / Available |
| Driving mode | - | Unipolar | Bipolar | - | - | Unipolar | Unipolar | Bipolar | - | Unipolar | Unipolar | Unipolar | Unipolar |
| Backlash(°) | - | 2 | 0.17 ～ 0.75 | - | - | 2 | - | - | - | - | - | - | - |
Loading...
Filter by:
-
Type
- Motor
- Driver Unit
- Motor Unit
- Set Product
-
Square flange dimensions A(mm)
-
Power Supply
-
Voltage Specifications
- DC Specifications
- 200 AC Specification
-
Control method
- Open loop
- Closed Loop
-
Step angle(°)
-
Holding torque (classification)(N·m)
- 0.1 or Less
- Up to 0.2
- Up to 0.3
- Up to 0.4
- Up to 0.5
- Up to 0.6
- Up to 0.7
- Up to 0.8
- Up to 0.9
- Up to 1
- Up to 1.2
- Up to 1.3
- Up to 1.4
- Up to 1.7
- Up to 1.8
- Up to 1.9
- Up to 2
- Up to 3
- Up to 4
- Up to 5
- Up to 10
- Up to 15
- Up to 20
- Up to 30
* -0.2 represents > 0.1/≤ 0.2.
-
Reduction Gear
- N/A
- Available
-
Driving mode
-
Backlash(°)
Brand
CAD data type
-
- 2D
- 3D
Categories related to Stepping Motors
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.