Conduit

?* Information on days to ship and prices

• 

  Duct Hoses / Lightweight Type

  MISUMI

  [Features] This duct hose is easy to bend, lightweight and easy to work with.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Heat Resistant Duct Hoses / For Hot Air Generating Units

  MISUMI

  [Features] A heat resistant duct hose. -Cutting service is available.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Duct Hoses / Friction Resistant / Antistatic

  MISUMI

  [Features] High cold, heat and abrasion resistance. [Material] It is polypropylene.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Duct Hoses / Oil-resistant / No Cuff

  MISUMI

  [Features] A sewer hose with high oil resistance. [Material] PVC.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Duct Hose - D Model

  KANAFLEX CORPORATION

  [Features]
  · A general-purpose duct hose with abundant applications and excellent quality and reliability.
  · Easy cutting and mounting facilitates easy piping.

  Select to compare

  Configure now
  Min. Shipping Days ：	16 Days

• 

  Duct Hose Insulation Duct S

  KANAFLEX CORPORATION

  [Features]
  · This duct hose is for ventilation of highly insulated, airtight houses.
  · High thermal insulation effect prevents condensation.
  · Lightweight and flexible. Smaller outer case, compared to glass wool ducts. Easy to cut. Great workability.
  · Single and double types available.

  Select to compare

  Configure now
  Min. Shipping Days ：	14 Days

• 

  TAC Duct D

  TOTAKU INDUSTRIES

  Used for transmission and exhaust in facilities and equipment. Bends easily, is lightweight, and was developed to be labor-saving.
  
  [Features]
  Achieves labor savings due to bendability and low weight.
  · Cutting and mounting are easy and piping work can be performed easily.

  Select to compare

  Configure now
  Min. Shipping Days ：	11 Days

• 

  TAC Duct EE

  TOTAKU INDUSTRIES

  A popular type of TAC DUCT-D. Less internal resistance compared with DUCT-D, and good transportability is obtained.

  Select to compare

  Configure now
  Min. Shipping Days ：	11 Days

• 

  Tie Duct Hose Anti-wear GL Type

  TIGERS POLYMER

  A tie duct hose GL type hose with superior wear resistance that can be used at a wide range of temperatures from -30°C to 80°C. Also has an anti-static effect.
  
  [Features]
  · Has superior wear resistance and can be used in a wide variety of temperatures (approximately -30°C to 80°C).
  Has superior conductivity and a static band prevention effect.
  · Has superior weather resistance.
  · Suited to the transport of powders and granular material, dust collection, and feeding high temperature exhaust.

  Select to compare

  Configure now
  Min. Shipping Days ：	10 Days

• 

  Duct Hoses / Oil Resistant

  MISUMI

  [Features] This product is semi-transparent so you can see what is being transported. [Material] It is made of polypropylene.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Duct Hoses / Aluminum Type

  MISUMI

  [Features] Highly elastic and flexible, can be stored compactly. An aluminium type.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	26.19 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Duct Pipe Hose - Rigid Duct N.S.

  KANAFLEX CORPORATION

  [Features]
  · PVC Product.
  · Excellent heat resistance.
  · Structure has less bends due to temperature change.
  · Flexible bendable hose.
  · At least 10% lighter than existing hard ducts.
  · Up to 50% elastic so as not to damage the airtightness.
  · Aperture will change just by twisting the opening of the duct.
  · Can be easily cut with a knife, and can be connected by just inserting the opening of the duct and wreathing with tape.
  · Cutting and mounting are easy and piping work can be performed easily.

  Select to compare

  Configure now
  Min. Shipping Days ：	56 Days

• 

  Duct Hose - New Kanaduct

  KANAFLEX CORPORATION

  [Features]
  · Superior heat resistance with a reinforced cord.
  ▪ Light in weight, flexible, and labor-saving.
  · Cutting and mounting are easy and piping work can be performed easily.

  Select to compare

  Configure now
  Min. Shipping Days ：	11 Days

• 

  TAC Duct AS

  TOTAKU INDUSTRIES

  TAC SD-AS duct type. Maintains an anti-static effect via the use of a special blended soft resin.
  
  [Features]
  TAC SD-AS duct type.
  Maintains an anti-static effect via the use of a special blended soft resin.

  Select to compare

  Configure now
  Min. Shipping Days ：	11 Days

• 

  Duct Hose GL Type

  TIGERS POLYMER

  Features a smooth inner surface and little ventilation loss. Exhaust feed hose for woodworking machinery, dusters, and general dust collectors.
  
  [Features]
  · Lightweight and portable.
  · Highly flexible.
  · Features superior chemical resistance against acids, alkali materials, etc.
  · High transport capacity is achieved due to low airflow resistance

  Select to compare

  Configure now
  Min. Shipping Days ：	9 Days

• 

  Duct Hoses / Swivel Type

  MISUMI

  [Features] This tube can be varied in the size of the hole. [Material] It is polypropylene.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Duct Hose Duct N.S.D.

  KANAFLEX CORPORATION

  The weight of the duct has been successfully reduced by 40% compared to conventional PVC ducts. A smooth inner surface design with increased ventilation and exhaust efficiency. This product has excellent antistatic effectiveness with a heat-resistance performance to prevent deformation at high temperatures.
  
  [Features]
  · The NSD duct provides a 40% weight reduction compared to conventional PVC ducts.
  · Easy to carry to increase work efficiency.
  · The inner surface of the NSD duct has been smoothed to a smoothness that is equivalent to PVC duct with increased ventilation and exhaust efficiency.
  · In a heat-test experiment, the NSD and PVC ducts were secured into a U-shape inside a constant-temperature room. The temperature inside the room was gradually increased. The PVC duct deformed at 60℃, whereas the NSD duct did not.
  · The NSD duct is a hose that has an antistatic effect due to antistatic agents that have been incorporated into the hose material.

  Select to compare

  Configure now
  Min. Shipping Days ：	10 Days

• 

  Duct Hose - Duct EE Type

  KANAFLEX CORPORATION

  [Features]
  ▪ Low internal resistance and high transportability.
  · Easy to bend, lightweight, and work-efficient.
  · Easy cutting and mounting facilitates easy piping.

  Select to compare

  Configure now
  Min. Shipping Days ：	9 Days

• 

  Duct Hose, Duct Oil Resistance

  KANAFLEX CORPORATION

  Has little internal resistance, therefore allowing for substantial transport capacity. Made from special oil-resistant vinyl chloride for excellent resistance to lubricating oil, cutting oil, and other oils. Cutting and mounting are easy and piping work can be performed easily.

  Select to compare

  Configure now
  Min. Shipping Days ：	16 Days

• 

  TAC Eco Duct

  TOTAKU INDUSTRIES

  Select to compare

  Configure now
  Min. Shipping Days ：	11 Days

• 

  TAC Eco Duct AS

  TOTAKU INDUSTRIES

  Select to compare

  Configure now
  Min. Shipping Days ：	9 Days

• 

  TAC Duct Thread

  TOTAKU INDUSTRIES

  [Features]
  ▪ It can be stretched due to reinforced cord, and has excellent bending durability.
  ▪ Ivory white colored ring that changes the image of vinyl duct, matches the new equipment.

  Select to compare

  Configure now
  Min. Shipping Days ：	11 Days

• 

  TAC Transparent Duct

  TOTAKU INDUSTRIES

  Transparent TAC duct EE allows the user to verify what is being transported.

  Select to compare

  Configure now
  Min. Shipping Days ：	11 Days

• 

  TAC Heran Duct

  TOTAKU INDUSTRIES

  Duct hose with 2 times the wear resistance of TAC ducting (according to internally conducted testing). Superior cold and heat resistance and anti-static properties. Duct hose not easily subject to ozone cracking.
  
  [Features]
  Is wear resistant and has superior cold and heat resistance (operating temperature range is -30°C to 80°C).
  · Duct hose with superior anti-static properties (material volume resistivity/105 Ω-cm or less).
  · Duct hose resistant to ozone cracking that can occurs in conventional rubber hoses

  Select to compare

  Configure now
  Min. Shipping Days ：	10 Days

• 

  TAC Rigid Duct PP

  TOTAKU INDUSTRIES

  Duct hose for spot coolers. Can be bent freely, and is able to sustain bent states. Furthermore, the opening diameter can be changed by twisting.
  
  [Features]
  · 10 to 20% lighter than conventional (PVC) products .
  · Can be bent freely, and is furthermore able to sustain bent states (please use indoors and note that as use temperatures increase, the product’s ability to keep its shape declines).
  · The opening diameter can be changed by twisting the opening.
  · Can be cut with knives etc.
  · Ducts can be connected easily by screwing their openings together (please wrap joints with vinyl tape after connecting ducts).
  · Ducts may be incinerated after use.

  Select to compare

  Configure now
  Min. Shipping Days ：	11 Days

• 

  TAC Oil Resistant Duct

  TOTAKU INDUSTRIES

  A duct hose with superior oil resistance that can be used for suction and discharge of oil mist.

  Select to compare

  Configure now
  Min. Shipping Days ：	11 Days

• 

  Bellows Duct

  TOTAKU INDUSTRIES

  Features large diameter opening yet is lightweight and can be freely shortened or elongated and can be stored compactly at approximately 1/3 of its full size. Can be used for ventilation, exhaust and dust collection applications in various areas such as construction areas inside manholes or tunnels.
  
  [Features]
  Can be freely shortened or elongated and can be stored compactly at approximately 1/3 of its full size.
  Features large diameter opening yet is lightweight and is easy to transport

  Select to compare

  Configure now
  Min. Shipping Days ：	11 Days

• 

  Duct Hose N Type

  TIGERS POLYMER

  Metal wire is used for reinforcement, and since thermal deformation is reduced, the hose has good flexibility.
  
  [Features]
  · Lightweight and portable.
  ・It has high flexibility.
  · It has superior chemical resistance properties for acids and alkaline etc.
  ・Metal wires in the core wires reduce heat deformation

  Select to compare

  Configure now
  Min. Shipping Days ：	10 Days

• 

  Tie Duct Hose, Oil-Resistant, GL Type

  TIGERS POLYMER

  Uses a special oil-resistant material (soft part of the hose) that is not hardened by lubricating oil, cutting oil, etc. Used for oil mist recovery on manufacturing machinery such as lathes and milling cutters.

  Select to compare

  Configure now
  Min. Shipping Days ：	10 Days

• 

  Tie Duct Hose, GL-E Type

  TIGERS POLYMER

  GL type tie duct antistatic hose that includes a grounding wire. Transparent, allowing transported materials to be confirmed. Indoor piping duct for clean rooms, etc.

  Select to compare

  Configure now
  Min. Shipping Days ：	10 Days

• 

  Tie Duct Hose, GL-ST Type

  TIGERS POLYMER

  A transparent antistatic type of tie duct hose. For indoor aerial transportation of soot, piping in clean rooms, etc.

  Select to compare

  Configure now
  Min. Shipping Days ：	10 Days

• 

  Ti-Eco Light, GL Type

  TIGERS POLYMER

  Select to compare

  Configure now
  Min. Shipping Days ：	10 Days

Loading...