Oil Gauges

?* Information on days to ship and prices

• • Promotional pricing

  

  Stainless Steel-Oil level sight glasses, Float glass

  GANTER

  Stainless Steel-Oil level sight glasses GN 743.4 offer genuine glass of high stability and scratch proof. The sealing is achieved with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures.
  The outside diameter of these oil level sight glasses with recessed hexagon is chosen to match mounting holes for tube connections according to DIN 3852.
  The seal is housed in a groove and it can therefore not be lost. In addition, this groove prevents the seal from being extruded when the sight glass is tightened.
  Stainless Steel-Oil level sight glasses GN 743.4 can be used on pressurised oil tanks. Tests regarding maximum pressure are available on request.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.66 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Oil level sight glasses, Aluminum / Perspex

  GANTER

  This oil level glass GN 537 does not require a thread.
  The oil level sight glass is inserted into the bore d2 to H11. By simply tightening the ring nut using the pin key the seal is pressed against the contact surface which, at the same time, will hold the sight glass in position. For removal reverse the procedure.
  Their application is limited to non-pressurised or only slightly pressurised tanks.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.10 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  HCX. - Column level indicators -Technopolymer

  ELESA

  Column level indicators with or without built-in thermometer in transparent polyamide-based technopolymer, polished zinc-plated steel screws, nuts and washers, NBR synthetic rubber O-ring packing rings and white lacquered aluminium contrast screen housed in the special external rear seat therefore not in direct contact with the fluid.
  High resistance to shocks, solvents, oils with additives, aliphatic and aromatic hydrocarbons, petrol, naphtha, phosphoric esters.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.56 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Oil level sight glasses with conical thread

  GANTER

  The conical thread of the oil level sight glasses GN 743.8 makes a metallic seal possible. When tightening the conical male thread R it blocks itself with the appropriate cylindrical female thread Rp.
  With the datum plane a the R-male thread has the same thread diameter as the Rp-female thread, so that it can be screwed in by hand. The strong tightening by means of a tool increases the length of engagement and seals the screw connection. Additionally a sealant (hemp or fluoropolymer band) is usually used. The R-thread is „roughened“, so that the sealant does not shift when screwing in.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.50 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Oil level sight glasses, Aluminium / Float glass, resistant up to 100°C, black a

  GANTER

  Oil level sight glasses GN 743 offer genuine glass of high stability and scratch proof. The sealing is achieved with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures.
  The outside diameter of these oil level sight glasses with recessed hexagon is chosen to match mounting holes for tube connections according to DIN 3852.
  The seal is housed in a groove and it can therefore not be lost. In addition, this groove prevents the seal from being extruded when the sight glass is tightened.
  Oil level sight glasses GN 743 can be used on pressurised oil tanks. Tests regarding maximum pressure are available on request.
  Assembly instruction:
  For mounting on walls of less than 4 mm thickness please use a fixing nut GN 543.1.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.40 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  HGFT. - Oil level indicators -Technopolymer

  ELESA

  Oil level indicators in black or red polyamide-based technopolymer, transparent polyamide-based technopolymer window, NBR synthetic rubber O-ring packing ring, with or without star-shaped contrast screen in matte anodized aluminium and red central level point.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.42 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Oil level gauges, Form B, with thermometer, Thermoplastic (28000)

  NORELEM

  · Application sectors: machine, container and vehicle construction
  
  · High mechanical strength
  
  · Ageing resistant
  
  · Temperature resistant to 100°C
  
  · Pressure resistant to 10 bar

  Select to compare

  Configure now
  Starting from∗ ：	20.95 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Oil level sight glasses, Aluminium / Float glas, resistant up to 100 °C, blank

  GANTER

  Oil level sight glasses GN 743 offer genuine glass of high stability and scratch proof. The sealing is achieved with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures.
  The outside diameter of these oil level sight glasses with recessed hexagon is chosen to match mounting holes for tube connections according to DIN 3852.
  The seal is housed in a groove and it can therefore not be lost. In addition, this groove prevents the seal from being extruded when the sight glass is tightened.
  Oil level sight glasses GN 743 can be used on pressurised oil tanks. Tests regarding maximum pressure are available on request.
  Assembly instruction:
  For mounting on walls of less than 4 mm thickness please use a fixing nut GN 543.1.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.12 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Oil level sight glasses, ESG-glass

  GANTER

  Stainless Steel-Oil level sight glasses GN 743.5 offer genuine glass of high stability and scratch proof. The sealing is achieved with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures.
  The outside diameter of these oil level sight glasses with recessed hexagon is chosen to match mounting holes for tube connections according to DIN 3852.
  The seal is housed in a groove and it can therefore not be lost. In addition, this groove prevents the seal from being extruded when the sight glass is tightened.
  Stainless Steel-Oil level sight glasses GN 743.5 can be used on pressurised oil tanks. Tests regarding maximum pressure are available on request.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.64 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  GH. - Nuts -Brass

  ELESA

  Brass return ring nuts used for assembling indicators HGFT, HGFT-EX, GN 743, GN 743.1, GN 743.2, GN 743.3, GN 743.4, GN 743.5, GN 743.6, GN 7403, HGFT-PR, HGFT-HT- PR, GN 744, HFTX, HFTX-EX, HFTX-PR, HFTR-PR, HCFE, HCFE-C, HCFE-EX on thin-walled tanks.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.88 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  HCK. - Column level indicators -with or without transparent protection technopolymer

  ELESA

  Column level indicators suitable for oil and solutions containing glycol with black glass fibre reinforced polyamide-based technopolymer fixing heads, natural aluminium base frame and white lacquered aluminium graduated contrast screen.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	26.40 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Mounting nuts, hydraulic components

  GANTER

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.66 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Oil-Sight Glasses

  HALDER

  For tanks without excess pressure.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.64 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  HCK. - Column level indicators -with transparent protection for glycol-based solutions technopolymer

  ELESA

  Column level indicators suitable for oil and solutions containing glycol with black glass fibre reinforced polyamide-based technopolymer fixing heads, natural aluminium base frame and white lacquered aluminium graduated contrast screen.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	46.11 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  HCX-LT - Column level indicator -with float for indirect level reading technopolymer

  ELESA

  Column level indicators with float for direct reading in transparent polyamide-based technopolymer, polished zinc-plated steel screws, nuts and washers, NBR synthetic rubber O-ring packing rings and white lacquered aluminium contrast screen housed in the special external rear seat therefore not in direct contact with the fluid.
  High resistance to shocks, solvents, oils with additives, aliphatic and aromatic hydrocarbons, petrol, naphtha, phosphoric esters.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	72.11 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Oil level sight glasses, Brass / Float glass

  GANTER

  Oil level sight glasses GN 743.2 offer genuine glass of high stability and scratch proof. The sealing is achieved with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures.
  The outside diameter of these oil level sight glasses with recessed hexagon is chosen to match mounting holes for tube connections according to DIN 3852.
  The seal is housed in a groove and it can therefore not be lost. In addition, this groove prevents the seal from being extruded when the sight glass is tightened.
  Oil level sight glasses GN 743.2 can be used on pressurised oil tanks. Tests regarding maximum pressure are available on request.
  Assembly instruction:
  For mounting on walls of less than 4 mm thickness please use a fixing nut GN 543.1.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.70 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  HCX-AR - Column level indicators -for use with fluids containing alcohol technopolymer

  ELESA

  Column level indicators for fluids containing alcohol with or without built-in thermometer in transparent polyamide-based technopolymer, polished zinc-plated steel screws, nuts and washers, NBR synthetic rubber O-ring packing rings and white lacquered aluminium contrast screen housed in the special external rear seat therefore not in direct contact with the fluid.
  High resistance to shocks, solvents, oils with additives, aliphatic and aromatic hydrocarbons, petrol, naphtha, phosphoric esters.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.09 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  HCZ-VT - Column level indicators -SUPER-technopolymer assembly screws with or without protection frame

  ELESA

  Column level indicators in transparent polyamide-based technopolymer, black glass fibre reinforced polyamide-based SUPER-technopolymer protection frame, glass fibre reinforced polyamide-based SUPER-technopolymer screws with high mechanical strength, AISI 304 stainless steel screws, nuts and washers, step-shaped packing rings for sealing on the tank wall and underhead O-ring of the screw in NBR synthetic rubber and white lacquered aluminium contrast screen.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.08 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  HFTX. - Oil level indicators -Technopolymer

  ELESA

  Oil level indicators in transparent polyamide-based technopolymer, star-shaped contrast screen in matte anodized aluminium and red central level point and NBR synthetic rubber O-ring packing ring.
  Avoid contact with alcohol or detergents containing alcohol.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.94 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  HGFT-HT-PR - Oil level indicators -with prismatic window high temperatures technopolymer

  ELESA

  Oil level indicators for high temperatures in black polyamide-based technopolymer, prismatic window in transparent sulphur-based technopolymer containing a continuous series of prisms which, due to refraction, provide a clear reading of the oil level contained in the tank, FKM O-ring packing ring.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.16 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  HRT. - Oil level indicators -push-fit technopolymer

  ELESA

  Oil level indicators in black polyamide-based technopolymer, transparent polyamide-based technopolymer window, white lacquered aluminium contrast screen with level line in red colour and NBR synthetic rubber O-ring packing ring.
  HRT. oil level indicators push-fit are particularly suitable for assembly on reservoirs with limited pressure.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.50 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  HVF. - Visual flow indicators -Technopolymer ends

  ELESA

  Visual flow indicators with black polypropylene-based technopolymer end flanges, red polypropylene-based technopolymer axis and rotor propeller, borosilicate glass tubular sight glass, AISI 316L stainless steel tie rods, AISI 316 stainless steel or brass bushings and packing rings in NBR synthetic rubber or FKM.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	55.07 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Oil level gauges with electronic oil level monitoring (K1425)

  KIPP

  · Recording of fill level visually and using reed switch
  
  · Sight glass with good mechanical stability
  
  · Temperature resistant to 75 °C

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	98.08 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  ATEX-Sight glasses, Aluminium / ESG glass

  GANTER

  ATEX-Sight glasses GN 743.6 are suitable for use in an explosion risk environment. They comply with the guidelines 94/9/EG.Detailed documentation is available and forms part of an order for this product.
  A detailed operating instruction is included with every GN 743.6 sight glass. In addition, the housing is provided with an ATEX-label.
  Further salient points of the oil level sight glasses GN 743.6 are:
  Genuine glass of high stability and scratch proof. The sealing is achieved with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures.
  The sealing ring is embedded in a radial groove and cannot drop out, nor can it be extruded when tightening torque is applied.
  
  Sight glasses GN 743.6 can be used on pressurised oil tanks. Tests regarding maximum pressure are available on request.
  Assembly instruction:
  For mounting on walls of less than 4 mm thickness please use a fixing nut GN 543.1.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.94 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Oil level sight glasses with conical thread

  GANTER

  The conical thread of the oil level sight glasses GN 743.7 makes a metallic seal possible. When tightening the conical male thread R it blocks itself with the appropriate cylindrical female thread Rp.
  With the datum plane a the R-male thread has the same thread diameter as the Rp-female thread, so that it can be screwed in by hand. The strong tightening by means of a tool increases the length of engagement and seals the screw connection. Additionally a sealant (hemp or fluoropolymer band) is usually used. The R-thread is „roughened“, so that the sealant does not shift when screwing in.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.10 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Oil level sight glasses, Aluminium / Plastic

  GANTER

  Oil level sight glasses GN 744 in type A use the so called prismatic effect of a cat’s eye to display the oil level unaffected by oil colour or oil viscosity. The advantage of this effect is particularly obvious in the case of under or overfilling or for inspection under unfavourable light conditions.
  The seal is housed in a radial groove in the aluminium body and hence cannot be lost. In addition it cannot be extruded when thigtening the sight glass.
  Oil level sight glasses GN 744 can also be used on pressurised tanks. Data of pressure an vacuum pressure tests is available.
  Assembly instruction:
  For mounting on walls of less than 4 mm thickness please use a fixing nut GN 543.1.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.40 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Oil level sight glasses, Aluminum / ESG glass, resistant up to 180 °C, black ano

  GANTER

  Oil level sight glasses GN 743.1 offer genuine glass of high stability and scratch proof. The sealing is achieved with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures.
  The outside diameter of these oil level sight glasses with recessed hexagon is chosen to match mounting holes for tube connections according to DIN 3852.
  The seal is housed in a groove and it can therefore not be lost. In addition, this groove prevents the seal from being extruded when the sight glass is tightened.
  Oil level sight glasses GN 743.1 can be used on pressurised oil tanks. Tests regarding maximum pressure are available on request.
  Assembly instruction:
  For mounting on walls of less than 4 mm thickness please use a fixing nut GN 543.1.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Oil level sight glasses, Aluminum / ESG glass, resistant up to 180 °C, blank

  GANTER

  Oil level sight glasses GN 743.1 offer genuine glass of high stability and scratch proof. The sealing is achieved with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures.
  The outside diameter of these oil level sight glasses with recessed hexagon is chosen to match mounting holes for tube connections according to DIN 3852.
  The seal is housed in a groove and it can therefore not be lost. In addition, this groove prevents the seal from being extruded when the sight glass is tightened.
  Oil level sight glasses GN 743.1 can be used on pressurised oil tanks. Tests regarding maximum pressure are available on request.
  Assembly instruction:
  For mounting on walls of less than 4 mm thickness please use a fixing nut GN 543.1.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.16 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Oil level sight glasses, Brass / ESG glass

  GANTER

  Oil level sight glasses GN 743.3 offer genuine glass of high stability and scratch proof. The sealing is achieved with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures.
  The outside diameter of these oil level sight glasses with recessed hexagon is chosen to match mounting holes for tube connections according to DIN 3852.
  The seal is housed in a groove and it can therefore not be lost. In addition, this groove prevents the seal from being extruded when the sight glass is tightened.
  Oil level sight glasses GN 743.3 can be used on pressurised oil tanks. Tests regarding maximum pressure are available on request.
  Assembly instruction:
  For mounting on walls of less than 4 mm thickness please use a fixing nut GN 543.1.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.74 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Pin keys for installation of GN 537

  GANTER

  Pin keys GN 537.1 are used for installation of oil level sight glasses GN 537.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.38 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  FM Kit - Fast Mounting Kit -Steel and rubber

  ELESA

  Fast mounting kit with threaded ring nut in zinc-plated steel and expansion packing ring in NBR synthetic rubber.
  The FM kit (fast mounting kit) has been designed for mounting level indicators series HCX. from the outside when nuts cannot be fitted from the inside of the reservoir.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.61 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  HCFE-EX - Oil circulation sights -Technopolymer

  ELESA

  Dome oil level sight glasses in transparent polyamide-based technopolymer and NBR synthetic rubber packing ring.
  Avoid contact with alcohol or detergents containing alcohol.
  HCFE-EX level indicators series comply with the Essential Health and Safety Requirements of the European ATEX Directive 2014/34/ EU (explosive atmospheres) for Group II devices, category 2GD.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.42 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  HCL. - Column level indicators -with U shaped protection technopolymer

  ELESA

  Column level indicators with fixing heads in black glass fibre reinforced polyamide-based technopolymer, U-shaped base frame in natural aluminium, column window with transparent tube in polymethylmethacrylate, zinc-plated steel screws with hexagon socket, NBR synthetic rubber O-ring packing rings and graduated contrast screen in plastic material resistant to oils and greases.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	48.51 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  HCX-BW-SST - Column level indicators -for hot water technopolymer

  ELESA

  Column level indicators in transparent polyamide-based technopolymer, AISI 303 stainless steel screws, AISI 304 stainless steel nuts and washers, FKM O-ring packing rings and white lacquered aluminium contrast screen housed in the special external rear seat therefore not in direct contact with the fluid.
  The special technopolymer allows it to be used even in the case of circuits operating with very hot water without causing opacity.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	46.64 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  HCX-E - Column level indicators -with MIN level electrical sensor technopolymer

  ELESA

  Column level indicators with MIN level electrical sensor in transparent polyamide-based technopolymer, screws, nuts and washers in polished zinc-plated steel, step-shaped O-ring packing rings in NBR synthetic rubber, float in technopolymer, bracket with watertight sensors in glass fibre reinforced polyamide-based technopolymer, adjustable connector and white lacquered aluminium contrast screen.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	93.28 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  HCX-E-ST - Column level indicators -with MIN level and MAX temperature electrical sensors technopolymer

  ELESA

  Column level indicators with MIN level and MAX temperature electrical sensors in transparent polyamide-based technopolymer, screws, nuts and washers in polished zinc-plated steel, step-shaped O-ring packing rings in NBR synthetic rubber, float in technopolymer, bracket with watertight sensors in glass fibre reinforced polyamide-based technopolymer, adjustable connector and white lacquered aluminium contrast screen.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	147.64 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  HCX-E-STL - Column level indicators -with MIN level electrical sensor and temperature electrical probe technopolymer

  ELESA

  Column level indicators with MIN level electrical sensor and temperature electrical sensor in transparent polyamide-base technopolymer, screws, nuts and washers in polished zinc-plated steel, step-shaped O-ring packing rings in NBR synthetic rubber, float in technopolymer, bracket with watertight sensors in glass fibre reinforced polyamide-based technopolymer, adjustable connector and white lacquered aluminium contrast screen.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	155.98 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  HCX-P - Column level indicators -technopolymer with zinc alloy protection frame

  ELESA

  Column level indicators with or without built-in thermometer in transparent polyamide-based technopolymer, zinc-alloy, sandblasted and treated finish protection frame. Step-shaped for the seal on the reservoir walls and NBR synthetic rubber O-ring screw underhead. White lacquered aluminium contrast screen.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	35.73 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  HCX-PT - Column level indicators -with SUPER-technopolymer protection frame

  ELESA

  Column level indicators in transparent polyamide-based technopolymer, black glass fibre reinforced polyamide-based SUPER-technopolymer protection frame, screws in polished zinc-plated steel or in AISI 303 stainless steel or in SUPER-technopolymer, nuts and washers in polished zinc-plated steel or in AISI 304 stainless steel, NBR synthetic rubber or FKM O-ring packing rings and white lacquered aluminium contrast screen.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.95 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  HCX-SST - Column level indicators -stainless steel assembly screws technopolymer

  ELESA

  Column level indicators with or without built-in thermometer in transparent polyamide-based technopolymer, AISI 303 stainless steel screws, AISI 304 stainless steel nuts and washers, FKM O-ring packing rings and white lacquered aluminium contrast screen housed in the special external rear seat therefore not in direct contact with the fluid.
  High resistance to shocks, solvents, oils with additives, aliphatic and aromatic hydrocarbons, petrol, naphtha, phosphoric esters.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	43.43 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  HCX-ST - Column level indicators -with MAX temperature electrical sensor technopolymer

  ELESA

  Column level indicators with MAX temperature electrical sensor in transparent polyamide-based technopolymer, screws, nuts and washers in polished zinc-plated steel, step-shaped O-ring packing rings in NBR synthetic rubber, float in technopolymer, bracket with watertight sensors in glass fibre reinforced polyamide-based technopolymer, adjustable connector and white lacquered aluminium contrast screen.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	154.44 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  HCX-STL - Column level indicators -with temperature electrical probe technopolymer

  ELESA

  Column level indicators with temperature electrical sensor in transparent polyamide-base technopolymer, screws, nuts and washers in polished zinc-plated steel, step-shaped O-ring packing rings in NBR synthetic rubber, float in technopolymer, bracket with watertight sensors in glass fibre reinforced polyamide-based technopolymer, adjustable connector and white lacquered aluminium contrast screen.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	154.44 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  HCX-VT - Column level indicators -SUPER-technopolymer assembly screws

  ELESA

  Column level indicators with or without built-in thermometer in transparent polyamide-based technopolymer, glass fibre reinforced polyamide-based SUPER-technopolymer screws, AISI 304 stainless steel nuts and washers, NBR synthetic rubber O-ring packing rings and white lacquered aluminium contrast screen housed in the special external rear seat therefore not in direct contact with the fluid.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.71 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  HCY-E - Column level indicators -with MIN level electrical sensor technopolymer

  ELESA

  Column level indicators with MIN level electrical sensor in transparent polyamide-base technopolymer, screws in nickel-plated brass with hexagon socket, step-shaped O-ring packing rings in NBR synthetic rubber, float in technopolymer, block with watertight sensor, connector with right side outlet and white lacquered aluminium contrast screen.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	102.26 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  HCY-E-ST - Column level indicators -with MIN level and MAX temperature electrical sensors technopolymer

  ELESA

  Column level indicators with MIN level and MAX temperature sensors in transparent polyamide-based technopolymer, screws in nickel-plated brass with hexagon socket, step-shaped O-ring packing rings in NBR synthetic rubber, float in technopolymer, block with watertight sensor, connector with right side outlet and white lacquered aluminium contrast screen.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	153.67 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...