Lifting Eyebolts

?* Information on days to ship and prices

• 

  DIN 580 Lifting eye bolts, Steel

  GANTER

  These lifting eye bolts correspond to standard sheet DIN 580.
  The following guidelines of lifting eye bolts DIN 580 the have to be observed in addition to the load values given in the above table.
  The eye bolt must be of fully screwd in to achieve a perfect contact between the two mating faces.
  Both threads must be of a equal length and the base material of equal strength to that of the bolt.
  Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
  The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.62 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Eye bolts DIN 444 Form B with long thread (K1418)

  KIPP

  [Specifications]
  ・Thread (M): 6-24
  ・Material: Steel, Stainless Steel
  ・Surface finish body: black oxidised, bright
  
  [Features]
  ・Suitable for use as hinge pins, swing hinges and guides
  ・Version: steel or stainless steel
  ・Material :Steel or 1.4305 stainless steel
  ・DIN 444

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.16 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Lifting eye bolts (rotating), Steel

  GANTER

  The lifting eye bolts GN 581are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in lifting eye bolts DIN 580).
  Lifting eye bolts GN 581 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).
  The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.
  Lifting eye bolts GN 581 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
  The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.
  The hexagon socket bolt cannot be removed from the ring.
  Type B is suitable for assembly without the need to use tools: inserting the spanner in the hexagon socket of the bolt allows the bolt to be turned in and out by hand.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	83.00 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  DIN 444 Eye bolts

  REYHER

  [Features]
  ・Eye bolts, B = product grade B (mg)
  ・DIN 444

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.81 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Lifting eye nuts, Stainless Steel A2

  GANTER

  The following guidelines of the Stainless Steel-Lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table.
  The eye nut must be of fully screwd in to achieve a perfect contact between the two mating faces.
  Both threads must be of a equal length and the base material of equal strength to that of the nut.
  Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
  The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.96 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Threaded Lifting Pins, self-locking

  HALDER

  Heavy-duty lifting element for quick and easy use, with moveable shackle and locking stud to provide protection against unintentional unlocking. For lifting loads, the threaded lifting pin is inserted into a threaded hole. In contrast to a ringbolt, time-consuming screwing in and out is therefore unnecessary.
  All versions are corrosion-protected. The version made from stainless steel is also resistant to corrosion and weathering, so it is also suitable for external use. In addition, the high-strength, precipitation-hardened pin makes extreme loads possible.
  
  [Operation]
  The threaded elements are unlocked by pressing the button.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	181.45 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• 

  Ring bolts DIN 580 (K0767)

  KIPP

  [Specifications]
  ・Thread (M): 8-24
  ・Material: Steel, Stainless Steel
  ・Surface finish body: galvanised, bright
  
  [Features]
  ・For hoisting and transport tasks
  ・Application sectors: machine and fixture construction, toolmaking, logistics, material handling
  ・Version: steel or stainless steel
  ・(K0767)
  ・DIN 580

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.25 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Lifting Pin Self-Locking

  HALDER

  [Features]
  · Corrosion resistant
  · Heat resistant to 250°C
  · Locating· Bushing use one from 22350.0900 to 0.0936 (for d1 = 8, 10, 12, 16).
  · Fitting for hanging that is speedy and simple to use yet solid.
  · The movable shackle is equipped with a safety bar to prevent the button from being pushed unintentionally.
  · A tap hole is not required for the item to be hung, only a H11 hole is needed.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	69.60 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Lifting eye bolts (rotating), Stainless Steel

  GANTER

  Stainless Steel-Lifting eye bolts GN 581.5 are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in Stainless Steel-Lifting eye bolts DIN 580).
  Stainless Steel-Lifting eye bolts GN 581.5 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).
  The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.
  Stainless Steel-Lifting eye bolts GN 581.5 eye bolts comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
  The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.
  The hexagon socket bolt cannot be removed from the ring.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	182.42 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  DIN 582 Lifting eye nuts

  REYHER

  Lifting eye nuts; Nuts

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.59 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Lifting eye bolts, Stainless Steel A2

  GANTER

  The following guidelines for Stainless Steel-Lifting eye bolts DIN 580 have to be observed in addition to the load values given in the above table.
  The eye bolt must be of fully screwed in to achieve a perfect contact between the two mating faces.
  Both threads must be of a equal length and the base material of equal strength to that of the bolt.
  Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
  The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.68 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Eye bolts DIN 444 Form B (K0396)

  KIPP

  [Specifications]
  ・Thread (M): 5-20
  ・Material: Steel, Stainless Steel
  ・Surface finish body: black oxidised, bright
  
  [Features]
  ・Suitable for use as hinge pins, swing hinges and guides
  ・Version: steel or stainless steel
  ・DIN 444

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.16 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  [Clean & Pack]Wing Hinge Screws - High Precision

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  ·Degreasing (Anti-rust single packing)	: Part Number SL-□□
  ·Precision cleaning (Degassing double packing)	: Part Number SH-□□
  ·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Possible applications
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000*)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000*)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  *US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.

  ■Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  
  

  [Volume Discount Rate]An average discount of 30% from 10 pcs. or more.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.46 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Lifting eye bolts, Stainless Steel A4

  GANTER

  The following guidelines for Stainless Steel-Lifting eye bolts DIN 580 have to be observed in addition to the load values given in the above table.
  The eye bolt must be of fully screwed in to achieve a perfect contact between the two mating faces.
  Both threads must be of a equal length and the base material of equal strength to that of the bolt.
  Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
  The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.80 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Locating· For Bushing Lifting Pin

  HALDER

  This bushing is a reliable holder for the safety of the lifting pin EH22350. [Features]
  · Mounting is simple and reliable.
  · Can be mounted to products made of various material.
  · Can be used in narrow areas or blind holes.
  · High corrosion resistance
  · Wear resistant

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	34.34 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ring bolts similar to DIN 580 (K1333)

  KIPP

  [Specifications]
  ・Thread (M): 8-20
  ・Material: Stainless Steel
  ・Surface finish body: bright
  
  [Features]
  ・For hoisting and transport tasks
  ・Application sectors: machine and fixture construction, toolmaking, logistics, material handling
  ・(K1333)
  ・DIN 580

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.60 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Eye bolts DIN 444, Form B (07180)

  NORELEM

  · Suitable for use as hinge pins, swing hinges and guides
  
  · Version: steel or stainless steel

  Select to compare

  Configure now
  Starting from∗ ：	4.17 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Lifting pins self-locking (07780)

  NORELEM

  · Quick and simple carrier element with movable shackles
  
  · The balls can be released by a push button
  
  · The balls are locked again by releasing the push button
  
  · 5x safety factor
  
  · TÜV tested

  Select to compare

  Configure now
  Starting from∗ ：	84.81 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  DIN 580 Eyebolts

  REYHER

  [Features]
  ・Lifting eye bolts
  ・DIN 580

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.50 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ring nuts DIN 582 (K0768)

  KIPP

  [Specifications]
  ・Thread (M): 8-24
  ・Material: Steel, Stainless Steel
  ・Surface finish body: bright, galvanised
  
  [Features]
  ・For hoisting and transport tasks
  ・Application sectors: machine and fixture construction, toolmaking, logistics, material handling
  ・Version: steel or stainless steel
  ・(K0768)
  ・DIN 582

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.16 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Eye bolts DIN 444, Form B with long thread (07181)

  NORELEM

  · Suitable for use as hinge pins, swing hinges and guides
  
  · Version: steel or stainless steel

  Select to compare

  Configure now
  Starting from∗ ：	3.91 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Lifting eye nuts, Steel

  GANTER

  The following guidelines of the lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table.
  The eye nut must be of fully screwd in to achieve a perfect contact between the two mating faces.
  Both threads must be of a equal length and the base material of equal strength to that of the nut.
  Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
  The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.58 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ring nuts similar to DIN 582 (07690-01)

  NORELEM

  · For hoisting and transport tasks
  
  · Application sectors: machine and fixture construction, toolmaking, logistics, material handling

  Select to compare

  Configure now
  Starting from∗ ：	6.78 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  DIN 80704 Bow nuts

  REYHER

  Bow nuts; Nuts

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.06 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Lifting eye nuts (rotating), Steel

  GANTER

  Lifting eye nuts GN 583 are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in lifting eye nuts DIN 582).
  Lifting eye nuts GN 583 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).
  The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.
  Lifting eye nuts GN 583 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
  The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.
  The hexagon socket nut cannot be removed from the ring.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	101.30 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Threaded Lifting Pins, self-locking, with rotatable shackle

  HALDER

  Material

  Pin part

  • Heat-treated steel, tempered, manganese phosphated
  • Stainless steel 1.4542, precipitation-hardened
  

  Press button

  • Aluminium, orange, anodised
  

  Threaded element

  • Stainless steel 1.4542, precipitation-hardened
  

  Shackle

  • Heat-treated steel, tempered, manganese phosphated
  • Stainless steel 1.4571
  

  Spring

  • Stainless Steel
  

  Assembly

  Threaded lifting pins can be mounted into a thread that is true to gauge.

  Mounting:

  • Press in the button and hold it down.
  • Insert the threaded lifting pin.
  • Release the button (The button must be back in its original position.).
  • Tighten the threaded lifting pin by hand, until it bears compleately on the bearing surface.
  • It must be ensured that the threaded segments are engaged in the mounting thread.
  

  Dismantling:

  • Unscrew the threaded lifting pin approx. a quarter of a turn anticlockwise.
  • Press in the button and hold it down.
  • Remove the threaded lifting pin.
  • Release the button.
  

  Operation

  Each threaded lifting pin contains an instruction manual with an EC Declaration of Conformity.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	300.46 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Ring bolts DIN 580 (07680)

  NORELEM

  · For hoisting and transport tasks
  
  · Application sectors: machine and fixture construction, toolmaking, logistics, material handling
  
  · Version: steel or stainless steel

  Select to compare

  Configure now
  Starting from∗ ：	1.50 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Hoist pins VDI 3366 (07679-01)

  NORELEM

  Select to compare

  Configure now
  Starting from∗ ：	27.63 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Lifting Pin, Self-Locking, Stainless Steel

  HALDER

  [Features]
  · Has high corrosion and weather resistance enabling use outdoors
  · Pin part uses hardened stainless steel and so has high strength
  · Operating temperature range is to a maximum of 250°C
  · Locating· Bushing use from 22350.0900 to 0.0936 (d1 = 8, 10, 12, 16) as well.
  · Fitting for hanging that is speedy and simple to use yet solid. The movable shackle is equipped with a safety bar to prevent the button from being pushed unintentionally. A tap hole is not required for the item to be hung, only a H11 hole is needed.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	125.97 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  DIN 28129 Lifting nuts

  REYHER

  ADW7; Nuts; eye nuts

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	81.14 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Ball Lock Connectors, self-locking, with holder, compact construction

  HALDER

  Parts can be connected fast and easily with the ball lock connector in combination with the locating bushings.
  The locating bushings are made from stainless steel. There are two versions available that can be mounted into wood and one version that can be mounted into plastic.
  As a robust tool, the item is made from stainless steel. The ball lock connector is maintenance-free, soundless and secured against loss.
  
  [Operation]
  The balls are unlocked by pressing the knob.

  Select to compare

  Configure now
  Starting from∗ ：	6.95 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• 

  Ring nuts similar to DIN 582 (K1334)

  KIPP

  [Specifications]
  ・Thread (M): 8-20
  ・Material: Stainless Steel
  ・Surface finish body: bright
  
  [Features]
  ・For hoisting and transport tasks
  ・Application sectors: machine and fixture construction, toolmaking, logistics, material handling
  ・(K1334)
  ・DIN 582

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.23 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Lifting pins self-locking, Stainless Steel (K1919)

  KIPP

  · Quick and simple carrier element with movable shackles
  
  · The balls can be released by a push button
  
  · The balls are locked again by releasing the push button
  
  · Corrosion protected
  
  · TÜV tested

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	132.81 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  ART 88536 FISCHER-Dübel

  REYHER

  Dübel u. Anker für Gerüste u. Fassaden (FISCHER); FISCHER-Dübel und Anker; Gerüsthalter (Dübel / Ringösen)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.04 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Lifting eye nuts, Stainless Steel A4

  GANTER

  The following guidelines of the Stainless Steel-Lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table.
  The eye nut must be of fully screwd in to achieve a perfect contact between the two mating faces.
  Both threads must be of a equal length and the base material of equal strength to that of the nut.
  Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
  The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.30 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Threaded Lifting Pins, self-locking, for centre holes according to DIN 332

  HALDER

  Material

  Pin part

  • Heat-treated steel, tempered, manganese phosphated
  • Stainless steel 1.4542, precipitation-hardened
  

  Press button

  • Aluminium, orange, anodised
  

  Threaded element

  • Stainless steel 1.4542, precipitation-hardened
  

  Shackle

  • Heat-treated steel, tempered, manganese phosphated
  • Stainless steel 1.4571
  

  Spring

  • Stainless Steel
  

  Assembly

  Threaded lifting pins can be mounted into a thread that is true to gauge.

  Mounting:

  • Press in the button and hold it down.
  • Insert the threaded lifting pin.
  • Release the button (The button must be back in its original position.).
  • Tighten the threaded lifting pin by hand, until it bears compleately on the bearing surface.
  • It must be ensured that the threaded segments are engaged in the mounting thread.
  

  Dismantling:

  • Unscrew the threaded lifting pin approx. a quarter of a turn anticlockwise.
  • Press in the button and hold it down.
  • Remove the threaded lifting pin.
  • Release the button.
  

  Operation

  Each threaded lifting pin contains an instruction manual with an EC Declaration of Conformity.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	196.80 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Lifting pins self-locking (K1920)

  KIPP

  · Quick and simple carrier element with movable shackles
  
  · The balls can be released by a push button
  
  · The balls are locked again by releasing the push button
  
  · 5x safety factor
  
  · TÜV tested

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	70.68 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Lifting pins self-locking, stainless steel (07782)

  NORELEM

  · For extreme loads and maximum wear-resistance
  
  · Quick and simple carrier element with movable shackles
  
  · The balls can be released by a push button
  
  · The balls are locked again by releasing the push button
  
  · 5x safety factor

  Select to compare

  Configure now
  Starting from∗ ：	142.97 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Ring bolts, stainless steel, revolving high-strength (07695-01)

  NORELEM

  Select to compare

  Configure now
  Starting from∗ ：	164.80 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Ball Lock Connectors, self-locking, holder / Bushing holder, function Nominal mm / mm / mm

  HALDER

  Parts can be connected fast and easily with the ball lock connector in combination with the locating bushings.The ball lock connector is maintenancefree, soundless and secured against loss.

  Select to compare

  Configure now
  Starting from∗ ：	14.62 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Threaded Lifting Pins, self-locking - INCH

  HALDER

  Material

  Pin part

  • Heat-treated steel, tempered, manganese phosphated
  • Stainless steel 1.4542, precipitation-hardened
  

  Press button

  • Aluminium, orange, anodised
  

  Threaded element

  • Stainless steel 1.4542, precipitation-hardened
  

  Shackle

  • Heat-treated steel, tempered, manganese phosphated
  • Stainless steel 1.4571
  

  Spring

  • Stainless Steel
  

  Assembly

  Threaded lifting pins can be mounted into a thread that is true to gauge.

  Mounting:

  • Press in the button and hold it down.
  • Insert the threaded lifting pin.
  • Release the button (The button must be back in its original position.).
  • Tighten the threaded lifting pin by hand, until it bears compleately on the bearing surface.
  • It must be ensured that the threaded segments are engaged in the mounting thread.
  

  Dismantling:

  • Unscrew the threaded lifting pin approx. a quarter of a turn anticlockwise.
  • Press in the button and hold it down.
  • Remove the threaded lifting pin.
  • Release the button.
  

  Operation

  Each threaded lifting pin contains an instruction manual with an EC Declaration of Conformity.

  Notes

  • This product is manufactured in INCH dimensions.
  

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	200.94 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Threaded Lifting Pins, self-locking, with rotatable shackle - INCH

  HALDER

  Material

  Pin part

  • Heat-treated steel, tempered, manganese phosphated
  • Stainless steel 1.4542, precipitation-hardened
  

  Press button

  • Aluminium, orange, anodised
  

  Threaded element

  • Stainless steel 1.4542, precipitation-hardened
  

  Shackle

  • Heat-treated steel, tempered, manganese phosphated
  • Stainless steel 1.4571
  

  Spring

  • Stainless Steel
  

  Assembly

  Threaded lifting pins can be mounted into a thread that is true to gauge.

  Mounting:

  • Press in the button and hold it down.
  • Insert the threaded lifting pin.
  • Release the button (The button must be back in its original position.).
  • Tighten the threaded lifting pin by hand, until it bears compleately on the bearing surface.
  • It must be ensured that the threaded segments are engaged in the mounting thread.
  

  Dismantling:

  • Unscrew the threaded lifting pin approx. a quarter of a turn anticlockwise.
  • Press in the button and hold it down.
  • Remove the threaded lifting pin.
  • Release the button.
  

  Operation

  Each threaded lifting pin contains an instruction manual with an EC Declaration of Conformity.

  Notes

  • This product is manufactured in INCH dimensions.
  

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	322.29 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Ring nuts DIN 582 (07690)

  NORELEM

  · For hoisting and transport tasks
  
  · Application sectors: machine and fixture construction, toolmaking, logistics, material handling
  
  · Version: steel or stainless steel

  Select to compare

  Configure now
  Starting from∗ ：	1.39 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Ring bolts similar to DIN 580 (07680-01)

  NORELEM

  · For hoisting and transport tasks
  
  · Application sectors: machine and fixture construction, toolmaking, logistics, material handling

  Select to compare

  Configure now
  Starting from∗ ：	7.26 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Hoist rings (07770)

  NORELEM

  · Load capacity up to 2,000 kg
  
  · Swivels and rotates
  
  · Version: steel and stainless steel

  Select to compare

  Configure now
  Starting from∗ ：	28.97 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...