Locating dowel sleeves
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
Dimensional Drawing / Product Specifications
DAS
DASP (With Tapped Hole)
[M]Material: EN 1.3505 Equiv. [H] Hardness: 55 HRC or more
Specification Table
| [ T ] | D | L | d | R | M × P (Removal Tap) | Part Number | |
|---|---|---|---|---|---|---|---|
| Type | No. | ||||||
| +0.010 +0.005 | 6 | 8 | 4.2 | 0.4 | — | DAS DASP | ※4 |
| 8 | 10 | 5.2 | 0.4 | 6 × 1.0 | 5 | ||
| 10 | 12 | 6.3 | 0.6 | 8 × 1.25 | 6 | ||
| 12 | 16 | 8.4 | 0.7 | 10 × 1.5 | 8 | ||
| 14 | 20 | 10.4 | 0.8 | 12 × 1.75 | 10 | ||
| 18 | 24 | 12.5 | 0.8 | 14 × 2.0 | 12 | ||
[ ! ] *No.4 is for DAS only.
[!] DASP is thinner than DAS. Therefore, use DAS or one size larger for the areas where rigidity is required.
Ordering Example
| Part Number |
| DAS 6 |
Related Information
■ Features
·Same level of positioning as dowel pin is possible.
· Positioning and tightening can be done at one time, and space can be saved.
·Three-layer plates can also be positioned.
·When press-fitting into the plate, the positioning ring deforms elastically.
■How to install the positioning ring
| (1) | Hole Machining Dimension to Plate |
| Hole Machining on Fixed Plate (Press Fit) |
Actual O.D. of Positioning Ring 0/-0.015
| Hole Machining on Plate on Removable Side (Gaps, Transition-Fit) |
Actual O.D. of Positioning Ring +0.015/0
These hole machining dimensions vary depending on the plate material, hardness, and applications, so use this as a reference.
| (2) | If positioning accuracy is required and both ends are press-fitted, apply removal tap or wedge to the plate to facilitate removal. | |
Fixed Side Removable Side Installation Example
| ||
App. Example
indicates positioning rings | ||
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| DAS4 |
| DAS5 |
| DAS6 |
| DAS8 |
| DAS10 |
| DAS12 |
| DASP5 |
| DASP6 |
| DASP8 |
| DASP10 |
| DASP12 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | With/without tapped hole | D (Diameter) (mm) | L (L dimension) (mm) | |
|---|---|---|---|---|---|---|---|---|
1.51 € | 1 |
Same day
Stock | 10 | W/O | 6 | 8 | ||
1.62 € | 1 | Available |
Same day
Stock | 10 | W/O | 8 | 10 | |
1.75 € | 1 |
Same day
Stock | 10 | W/O | 10 | 12 | ||
1.87 € | 1 | Available | 5 Days | 10 | W/O | 12 | 16 | |
1.99 € | 1 | Available |
Same day
Stock | 10 | W/O | 14 | 20 | |
2.11 € | 1 | Available | 5 Days | 10 | W/O | 18 | 24 | |
1.92 € | 1 | Available | 5 Days | 10 | With | 8 | 10 | |
2.05 € | 1 | Available | 5 Days | 10 | With | 10 | 12 | |
2.16 € | 1 | Available | 5 Days | 10 | With | 12 | 16 | |
2.29 € | 1 | Available | 5 Days | 10 | With | 14 | 20 | |
2.64 € | 1 | Available | 5 Days | 10 | With | 18 | 24 |
Loading...
Basic information
| Shape | Ring | Diameter D tolerance | +0.010/+0.005 |
|---|
Configure
Stock
-
- Show only stock items
Basic Attributes
-
With/without tapped hole
- With
- W/O
-
D (Diameter)(mm)
-
L (L dimension)(mm)
-
Type
- DAS
- DASP
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- Same day
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.