• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Motor shafts / stepped on one side / double stepped on one side / machining selectable (Part Numbers - CAD Download)

Motor shafts / stepped on one side / double stepped on one side / machining selectable

MISUMI

MISUMI

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Dimensional Drawing

Driving Shaft - One End Stepped, One End Double Stepped Type: Related Image
[ ! ]ℓ = L－ (LA+LB+LC)
[!] The shaft may have centering holes on ends.
[!] There is an undercut 1.5 mm or less in width and 0.3 mm or less in depth on the stepped part.
[!] Step P, Q of KZDE has no grinding undercut. Step R = 0.2 or Less
* Ds: Tap dimension of Bearing Inner Race.
DTolerance
h7h6
100
-0.015		0
-0.009
120
-0.018		0
-0.011
15
200
-0.021		0
-0.013
25
30
35—0
-0.016
40
50
DCircularity M
KZDEOthers
100.0040.003
12
150.005
20
250.0060.005
30
35—
40
50
 
TypeD, P, Q ToleranceConcentricityPerpendicularity[M] Material[H]Hardness[S] Surface Treatment
KZDEh7⌀0.05⊥0.05EN 1.1191 Equiv.—Black Oxide
KZDNh6⌀0.01⊥0.01EN 1.1191 Equiv.——
KZDCBlack Oxide
KZDPElectroless Nickel Plating
KZDSEN 1.4301 Equiv.—
KZDFEN 1.1191 Equiv.Induction Hardened—
Surface Hardness 50HRC or more

Specification Table

Part Number—L—P—LA—LB—Q—LC
KZDN25—500—P20—LA100—LB60—Q15—LC80
Part Number0.5 mm IncrementsSelection0.5 mm Increments1 mm Increments0.5 mm Increments* Ds
TypeDLPLALBQLC
KZDE
(D10 to 30)

KZDN
KZDC
KZDP
KZDS
KZDF		1050.0 to 300.064.0 to 40.04.0 to 40.05 to 73.0 to 30.08
84.0 to 40.09.5
12810
105.0 to 50.05.0 to 50.07 to 95.0 to 50.011.5
15100.0 to 400.01013
125.0 to 75.07 to 115.0 to 60.014
201510 to 145.0 to 75.018
175.0 to 100.010 to 165.0 to 100.019
25100.0 to 500.01721
2010.0 to 100.010.0 to 60.014 to 1910.0 to 100.024
302027
2510.0 to 125.014 to 2410.0 to 125.029
* 352531
3015.0 to 150.015.0 to 70.020 to 2915.0 to 150.034
* 40200.0 to 500.03037
3520 to 3439
* 504020.0 to 150.020.0 to 70.020 to 3920.0 to 150.048
4520 to 4449
[!] * marked sizes are not available for KZDE.

Alterations

Part Number—L—P—LA—LB—Q—LC—(MA, NA, KA, TA, SA, WA, etc.)
KZDN40—300—P30—LA60—LB60—Q20—LC60—MMA30－MMB30－ KA15 － HA15 － KC0 － HC30
AlterationsCodeSpec.
Left EndRight End

Threaded Ends

Driving Shaft - One End Stepped, One End Double Stepped Type: Related Image		MA
MSA
MMA		MB
MSB
MMB

MC
MSC
MMC

Adds threads at shaft ends. Specify the length of the threads. (Accuracy, coarse or fine threads differ depending on the current ordering code.)
Ordering Code MA15-MSB15 1 mm Increments 5 ≤ Thread Length ≤ M × 5, LA (LB, LC)-2

 
CodeScrew Accuracy
Left EndRight End
MAMBMCCoarseJIS 6h (Class 2)
MSAMSBMSCFine (Standard Grade)JIS 6h (Class 2)
MMAMMBMMCFine (Precision Grade)JIS 4h (Class 1)

[!] When P, Q = M, thread length can be specified.
[NG] Fine (Precision Grade) is not available for KZDE.

M (Coarse)PitchM (Fine)PitchM (Fine)Pitch
M50.8M50.5M201.0
M61.0M60.75M251.5
M81.25M80.75M301.5
M101.5M100.75M351.5
M121.75M121.0M401.5
M202.5M151.0M451.5
M303.5M171.0M501.5

Tapped Ends

Driving Shaft - One End Stepped, One End Double Stepped Type: Related Image		NANC

Adds taps on shaft ends. Select the thread diameter.
Ordering Code NA5-NC5 [!] NA, NC ≤ P (Q)-4

NA (coarse), NC (Coarse)
Selection
M3 M4 M5 M6 M8
M10 M12 M16 M20
M24

Keyway Machining

Driving Shaft - One End Stepped, One End Double Stepped Type: Related Image		KA
KB		KC
KD		Adds a keyway. Specify the position and the length of the keyway.
Ordering Code KA10-HA30-KB100-HB50
KA, HA, KB, HB, KC, HC, KD, HD = 1 mm Increments
[ ! ]3 ≤ HA,HB,HC,HD ≤ 100
[!]When more than 2 keyways are added, the tolerances may shift by up to 0.2°.
[!] Specify the keyway position more than 2 mm away from the stepped part

Keyway Machining + Set Screw Flat

Driving Shaft - One End Stepped, One End Double Stepped Type: Related Image		ZA
ZB		ZC
ZD

Adds a flat at any designated angle based on the keyways. Specify the length and width for each keyway, and the angle for the set screw flats.
Ordering CodeZA40-HA20-AA90
ZA, HA, ZB, HB, ZC, HC, ZD, HD = 1 mm Increments AA, AB, AC, AD = 30° Increments 30° ≤ AA, AB, AC, AD ≤ 330°
[!] 3 ≤ HA, HB, HC, HD ≤ 100 [!] Specify the keyway position more than 2 mm away from the stepped part.

·Specification Code

Keyway
Position Specified		Keyway
Width Specified		Angle Configurable
30° Increments
ZAHAAA
ZBHBAB
ZCHCAC
ZDHDAD
D·P·Q56 to 1718 to 4041 to 50
H0.5123

[!] The length of each set screw flat is the same as that of each keyway.
[!] For a keyway and the angle of a set screw flat, the tolerances may shift by up to ± 0.2°.

Retaining Ring Groove

Driving Shaft - One End Stepped, One End Double Stepped Type: Related Image		TATB
TC
Adds a retaining ring groove. Specify the position of a retaining ring groove.
Ordering Code TA10 - TB10 - TC10
TA, TB, TC = 1 mm Increments [!] 4 ≤ TA ≤ LA-3
[!] Retaining rings are included.
[ NG ]Q = 27,31,33,34,36 to 39,
　　　Not available for 41 to 44.

P,Q ≤ 8: Retaining Ring Type E P, Q ≥ 9: Retaining Ring Type C

Driving ShaftsRetaining Ring
[M] Material[H]Hardness[S] Surface Treatment[M] Material
EN 1.1191 Equiv.——Spring Steel
Black Oxide
Electroless Nickel PlatingEN 1.4301 Equiv. (CSP)
EN 1.4301 Equiv.—
EN 1.1191 Equiv.Surface 50HRC or more—Spring Steel

Wrench Flats

Driving Shaft - One End Stepped, One End Double Stepped Type: Related Image		SA
SD		SC

Adds wrench flats. Specify the position of a wrench flat.
Ordering Code SA5 SA, SC, SD = 1 mm Increments SA, SC, SD ≥ 0 SA ≤ LA-ℓ, SC ≤ LC-ℓ, SD ≤ L-LB-LC-ℓ

 
D101215202530354050
W81013172227303641
ℓ8101520
 
P·Q5678 to 1011 to 1314 to 1516 to 1819 to 2122 to 2526 to 2829 to 3132 to 3738 to 4142 to 45
W1455.5710131417192227303638
ℓ8101520

2 Set Screw Flats (Angle Specified)

Driving Shaft - One End Stepped, One End Double Stepped Type: Related Image		WA
WD		WC
WE

Adds a flat at any designated angle besides the datum plane 0°.
Specify the position, the length and the angle of the set screw flats. When 0° is specified, only one set screw flat is machinable.
Ordering Code WA15-GA10-AA0
WA, WC, WD, WE, GA, GC, GD, GE = 1 mm Increments AA, AB, AC, AD = 30° Increments 0° ≤ AA, AB, AC, AD ≤ 330°

·Specification Code

Set Screw Flat
Position Specification		Set Screw Flat
Width Specification		Angle Configurable
30° Increments
WAGAAA
WCGCAB
WDGDAC
WEGEAD
D·P·Q56 to 1718 to 4041 to 50
H0.5123

·WE is applicable for KZDE only.

Tolerance Change

Driving Shaft - One End Stepped, One End Double Stepped Type: Related Image		PJ (js6)
PK (k6)

Changes the tolerance of P Dimension of the stepped part to js6 or k6.
Ordering Code PJ or PK
[!] Both LA and LB tolerances will be changed.
[NG] Not available for KZDE.


·About KZDF (Induction Hardened)

When alterations on the above are specified,
the shafts are induction hardened after machining. (Except the threaded sections)
As a result, these may occur:
(1): Due to thermal conduction to the thread, the threads may be hardened by 2 to 3 mm. (2): Induction Hardened may shrink the keyway width (Around -0.01 to -0.02)
If the key becomes hard to fit, adjust it by gauging.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
KZDC10-[50-300/0.5]-P[6,​8]-LA[4-40/0.5]-LB[4-40/0.5]-Q[5-7/1]-LC[4-40/0.5]
KZDC12-[50-300/0.5]-P[8,​10]-LA[4-50/0.5]-LB[4-50/0.5]-Q[5-9/1]-LC[4-50/0.5]
KZDC15-[100-400/0.5]-P[10,​12]-LA[5-75/0.5]-LB[5-50/0.5]-Q[7-11/1]-LC[5-60/0.5]
KZDC20-[100-400/0.5]-P[15,​17]-LA[5-100/0.5]-LB[5-50/0.5]-Q[10-16/1]-LC[5-100/0.5]
KZDC25-[100-500/0.5]-P[17,​20]-LA[5-100/0.5]-LB[5-60/0.5]-Q[10-19/1]-LC[5-100/0.5]
KZDC30-[100-500/0.5]-P[20,​25]-LA[10-125/0.5]-LB[10-60/0.5]-Q[14-24/1]-LC[10-125/0.5]
KZDC35-[100-500/0.5]-P[25,​30]-LA[10-150/0.5]-LB[10-70/0.5]-Q[14-29/1]-LC[10-150/0.5]
KZDC40-[200-500/0.5]-P[30,​35]-LA[15-150/0.5]-LB[15-70/0.5]-Q[20-29/1]-LC[15-150/0.5]
KZDC50-[200-500/0.5]-P[40,​45]-LA[20-150/0.5]-LB[20-70/0.5]-Q[20-44/1]-LC[20-150/0.5]
KZDE10-[50-400/0.5]-P[6,​8]-LA[4-40/0.5]-LB[4-40/0.5]-Q[5-7/1]-LC[4-40/0.5]
KZDE12-[50-400/0.5]-P[8,​10]-LA[4-50/0.5]-LB[4-50/0.5]-Q[5-9/1]-LC[4-50/0.5]
KZDE15-[100-400/0.5]-P[10,​12]-LA[5-75/0.5]-LB[5-50/0.5]-Q[7-11/1]-LC[5-60/0.5]
KZDE20-[100-400/0.5]-P[15,​17]-LA[5-100/0.5]-LB[5-50/0.5]-Q[10-16/1]-LC[5-100/0.5]
KZDE25-[100-500/0.5]-P[17,​20]-LA[5-100/0.5]-LB[5-60/0.5]-Q[10-19/1]-LC[5-100/0.5]
KZDE30-[100-500/0.5]-P[20,​25]-LA[10-125/0.5]-LB[10-60/0.5]-Q[14-24/1]-LC[10-125/0.5]
KZDF10-[50-300/0.5]-P[6,​8]-LA[4-40/0.5]-LB[4-40/0.5]-Q[5-7/1]-LC[4-40/0.5]
KZDF12-[50-300/0.5]-P[8,​10]-LA[4-50/0.5]-LB[4-40/0.5]-Q[5-9/1]-LC[4-50/0.5]
KZDF15-[100-400/0.5]-P[10,​12]-LA[5-75/0.5]-LB[5-50/0.5]-Q[7-11/1]-LC[5-60/0.5]
KZDF20-[100-400/0.5]-P[15,​17]-LA[5-100/0.5]-LB[5-50/0.5]-Q[10-16/1]-LC[5-100/0.5]
KZDF25-[100-500/0.5]-P[17,​20]-LA[5-100/0.5]-LB[5-60/0.5]-Q[10-19/1]-LC[5-100/0.5]
KZDF30-[100-500/0.5]-P[20,​25]-LA[10-125/0.5]-LB[10-60/0.5]-Q[14-24/1]-LC[10-125/0.5]
KZDF35-[100-500/0.5]-P[25,​30]-LA[10-150/0.5]-LB[10-70/0.5]-Q[14-29/1]-LC[10-150/0.5]
KZDF40-[200-500/0.5]-P[30,​35]-LA[15-150/0.5]-LB[15-70/0.5]-Q[20-34/1]-LC[15-150/0.5]
KZDF50-[200-500/0.5]-P[40,​45]-LA[20-150/0.5]-LB[20-70/0.5]-Q[20-44/1]-LC[20-150/0.5]
KZDN10-[50-300/0.5]-P[6,​8]-LA[4-40/0.5]-LB[4-40/0.5]-Q[5-7/1]-LC[4-40/0.5]
KZDN12-[50-300/0.5]-P[8,​10]-LA[4-50/0.5]-LB[4-40/0.5]-Q[5-9/1]-LC[4-50/0.5]
KZDN15-[100-400/0.5]-P[10,​12]-LA[5-75/0.5]-LB[5-50/0.5]-Q[7-11/1]-LC[5-60/0.5]
KZDN20-[100-400/0.5]-P[15,​17]-LA[5-100/0.5]-LB[5-50/0.5]-Q[10-16/1]-LC[5-100/0.5]
KZDN25-[100-500/0.5]-P[17,​20]-LA[5-100/0.5]-LB[5-60/0.5]-Q[10-19/1]-LC[5-100/0.5]
KZDN30-[100-500/0.5]-P[20,​25]-LA[10-125/0.5]-LB[10-60/0.5]-Q[14-24/1]-LC[10-125/0.5]
KZDN35-[100-500/0.5]-P[25,​30]-LA[10-150/0.5]-LB[10-70/0.5]-Q[14-29/1]-LC[10-150/0.5]
KZDN40-[200-500/0.5]-P[30,​35]-LA[15-150/0.5]-LB[15-70/0.5]-Q[20-34/1]-LC[15-150/0.5]
KZDN50-[200-500/0.5]-P[40,​45]-LA[20-150/0.5]-LB[20-70/0.5]-Q[20-44/1]-LC[20-150/0.5]
KZDP10-[50-300/0.5]-P[6,​8]-LA[4-40/0.5]-LB[4-40/0.5]-Q[5-7/1]-LC[4-40/0.5]
KZDP12-[50-300/0.5]-P[8,​10]-LA[4-50/0.5]-LB[4-50/0.5]-Q[5-9/1]-LC[4-50/0.5]
KZDP15-[100-400/0.5]-P[10,​12]-LA[5-75/0.5]-LB[5-50/0.5]-Q[7-11/1]-LC[5-60/0.5]
KZDP20-[100-400/0.5]-P[15,​17]-LA[5-100/0.5]-LB[5-50/0.5]-Q[10-16/1]-LC[5-100/0.5]
KZDP25-[100-500/0.5]-P[17,​20]-LA[5-100/0.5]-LB[5-60/0.5]-Q[10-19/1]-LC[5-100/0.5]
KZDP30-[100-500/0.5]-P[20,​25]-LA[10-125/0.5]-LB[10-60/0.5]-Q[14-24/1]-LC[10-125/0.5]
KZDP35-[100-500/0.5]-P[25,​30]-LA[10-150/0.5]-LB[10-70/0.5]-Q[14-29/1]-LC[10-150/0.5]
KZDP40-[200-500/0.5]-P[30,​35]-LA[15-150/0.5]-LB[15-70/0.5]-Q[20-29/1]-LC[15-150/0.5]
KZDP50-[200-500/0.5]-P[40,​45]-LA[20-150/0.5]-LB[20-70/0.5]-Q[20-44/1]-LC[20-150/0.5]
KZDS10-[50-300/0.5]-P[6,​8]-LA[4-40/0.5]-LB[4-40/0.5]-Q[5-7/1]-LC[4-40/0.5]
KZDS12-[50-300/0.5]-P[8,​10]-LA[4-50/0.5]-LB[4-50/0.5]-Q[5-9/1]-LC[4-50/0.5]
KZDS15-[100-400/0.5]-P[10,​12]-LA[5-75/0.5]-LB[5-50/0.5]-Q[7-11/1]-LC[5-60/0.5]
KZDS20-[100-400/0.5]-P[15,​17]-LA[5-100/0.5]-LB[5-50/0.5]-Q[10-16/1]-LC[5-100/0.5]
KZDS25-[100-500/0.5]-P[17,​20]-LA[5-100/0.5]-LB[5-60/0.5]-Q[10-19/1]-LC[5-100/0.5]
KZDS30-[100-500/0.5]-P[20,​25]-LA[10-125/0.5]-LB[10-60/0.5]-Q[14-24/1]-LC[10-125/0.5]
KZDS35-[100-500/0.5]-P[25,​30]-LA[10-150/0.5]-LB[10-70/0.5]-Q[14-29/1]-LC[10-150/0.5]
KZDS40-[200-500/0.5]-P[30,​35]-LA[15-150/0.5]-LB[15-70/0.5]-Q[20-29/1]-LC[15-150/0.5]
KZDS50-[200-500/0.5]-P[40,​45]-LA[20-150/0.5]-LB[20-70/0.5]-Q[20-44/1]-LC[20-150/0.5]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMaterial Hardness Surface Treatment Shaft Dia. D
(mm) 		Shaft Tolerance L
(mm) 		LA
(mm) 		LB
(mm) 		LC
(mm) 		P
(mm) 		Q
(mm)
1 16 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Black Oxide10h650 ～ 3004 ～ 404 ～ 404 ～ 406 ～ 85 ～ 7
1 16 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Black Oxide12h650 ～ 3004 ～ 504 ～ 504 ～ 508 ～ 105 ～ 9
1 16 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Black Oxide15h6100 ～ 4005 ～ 755 ～ 505 ～ 6010 ～ 127 ～ 11
1 16 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Black Oxide20h6100 ～ 4005 ～ 1005 ～ 505 ～ 10015 ～ 1710 ～ 16
1 16 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Black Oxide25h6100 ～ 5005 ～ 1005 ～ 605 ～ 10017 ～ 2010 ～ 19
1 16 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Black Oxide30h6100 ～ 50010 ～ 12510 ～ 6010 ～ 12520 ～ 2514 ～ 24
1 16 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Black Oxide35h6100 ～ 50010 ～ 15010 ～ 7010 ～ 15025 ～ 3014 ～ 29
1 16 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Black Oxide40h6200 ～ 50015 ～ 15015 ～ 7015 ～ 15030 ～ 3520 ～ 29
1 16 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Black Oxide50h6200 ～ 50020 ～ 15020 ～ 7020 ～ 15040 ～ 4520 ～ 44
1 9 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Black Oxide10h750 ～ 4004 ～ 404 ～ 404 ～ 406 ～ 85 ～ 7
1 9 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Black Oxide12h750 ～ 4004 ～ 504 ～ 504 ～ 508 ～ 105 ～ 9
1 9 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Black Oxide15h7100 ～ 4005 ～ 755 ～ 505 ～ 6010 ～ 127 ～ 11
1 9 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Black Oxide20h7100 ～ 4005 ～ 1005 ～ 505 ～ 10015 ～ 1710 ～ 16
1 9 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Black Oxide25h7100 ～ 5005 ～ 1005 ～ 605 ～ 10017 ～ 2010 ～ 19
1 9 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Black Oxide30h7100 ～ 50010 ～ 12510 ～ 6010 ～ 12520 ～ 2514 ～ 24
1 18 Days 10EN 1.1191 Equiv.-No Surface Treatment10h650 ～ 3004 ～ 404 ～ 404 ～ 406 ～ 85 ～ 7
1 18 Days 10EN 1.1191 Equiv.-No Surface Treatment12h650 ～ 3004 ～ 504 ～ 404 ～ 508 ～ 105 ～ 9
1 18 Days 10EN 1.1191 Equiv.-No Surface Treatment15h6100 ～ 4005 ～ 755 ～ 505 ～ 6010 ～ 127 ～ 11
1 18 Days 10EN 1.1191 Equiv.-No Surface Treatment20h6100 ～ 4005 ～ 1005 ～ 505 ～ 10015 ～ 1710 ～ 16
1 18 Days 10EN 1.1191 Equiv.-No Surface Treatment25h6100 ～ 5005 ～ 1005 ～ 605 ～ 10017 ～ 2010 ～ 19
1 18 Days 10EN 1.1191 Equiv.-No Surface Treatment30h6100 ～ 50010 ～ 12510 ～ 6010 ～ 12520 ～ 2514 ～ 24
1 18 Days 10EN 1.1191 Equiv.-No Surface Treatment35h6100 ～ 50010 ～ 15010 ～ 7010 ～ 15025 ～ 3014 ～ 29
1 18 Days 10EN 1.1191 Equiv.-No Surface Treatment40h6200 ～ 50015 ～ 15015 ～ 7015 ～ 15030 ～ 3520 ～ 34
1 18 Days 10EN 1.1191 Equiv.-No Surface Treatment50h6200 ～ 50020 ～ 15020 ～ 7020 ～ 15040 ～ 4520 ～ 44
1 16 Days 10EN 1.1191 Equiv.No HardenedNo Surface Treatment10h650 ～ 3004 ～ 404 ～ 404 ～ 406 ～ 85 ～ 7
1 16 Days 10EN 1.1191 Equiv.No HardenedNo Surface Treatment12h650 ～ 3004 ～ 504 ～ 404 ～ 508 ～ 105 ～ 9
1 16 Days 10EN 1.1191 Equiv.No HardenedNo Surface Treatment15h6100 ～ 4005 ～ 755 ～ 505 ～ 6010 ～ 127 ～ 11
1 16 Days 10EN 1.1191 Equiv.No HardenedNo Surface Treatment20h6100 ～ 4005 ～ 1005 ～ 505 ～ 10015 ～ 1710 ～ 16
1 16 Days 10EN 1.1191 Equiv.No HardenedNo Surface Treatment25h6100 ～ 5005 ～ 1005 ～ 605 ～ 10017 ～ 2010 ～ 19
1 16 Days 10EN 1.1191 Equiv.No HardenedNo Surface Treatment30h6100 ～ 50010 ～ 12510 ～ 6010 ～ 12520 ～ 2514 ～ 24
1 16 Days 10EN 1.1191 Equiv.No HardenedNo Surface Treatment35h6100 ～ 50010 ～ 15010 ～ 7010 ～ 15025 ～ 3014 ～ 29
1 16 Days 10EN 1.1191 Equiv.No HardenedNo Surface Treatment40h6200 ～ 50015 ～ 15015 ～ 7015 ～ 15030 ～ 3520 ～ 34
1 16 Days 10EN 1.1191 Equiv.No HardenedNo Surface Treatment50h6200 ～ 50020 ～ 15020 ～ 7020 ～ 15040 ～ 4520 ～ 44
1 18 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Electroless Nickel Plating10h650 ～ 3004 ～ 404 ～ 404 ～ 406 ～ 85 ～ 7
1 18 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Electroless Nickel Plating12h650 ～ 3004 ～ 504 ～ 504 ～ 508 ～ 105 ～ 9
1 18 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Electroless Nickel Plating15h6100 ～ 4005 ～ 755 ～ 505 ～ 6010 ～ 127 ～ 11
1 18 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Electroless Nickel Plating20h6100 ～ 4005 ～ 1005 ～ 505 ～ 10015 ～ 1710 ～ 16
1 18 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Electroless Nickel Plating25h6100 ～ 5005 ～ 1005 ～ 605 ～ 10017 ～ 2010 ～ 19
1 18 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Electroless Nickel Plating30h6100 ～ 50010 ～ 12510 ～ 6010 ～ 12520 ～ 2514 ～ 24
1 18 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Electroless Nickel Plating35h6100 ～ 50010 ～ 15010 ～ 7010 ～ 15025 ～ 3014 ～ 29
1 18 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Electroless Nickel Plating40h6200 ～ 50015 ～ 15015 ～ 7015 ～ 15030 ～ 3520 ～ 29
1 18 Days 10EN 1.1191 Equiv.No Hardened[Surface Treatment Provided] Electroless Nickel Plating50h6200 ～ 50020 ～ 15020 ～ 7020 ～ 15040 ～ 4520 ～ 44
1 18 Days 10EN 1.4301 Equiv.No HardenedNo Surface Treatment10h650 ～ 3004 ～ 404 ～ 404 ～ 406 ～ 85 ～ 7
1 18 Days 10EN 1.4301 Equiv.No HardenedNo Surface Treatment12h650 ～ 3004 ～ 504 ～ 504 ～ 508 ～ 105 ～ 9
1 18 Days 10EN 1.4301 Equiv.No HardenedNo Surface Treatment15h6100 ～ 4005 ～ 755 ～ 505 ～ 6010 ～ 127 ～ 11
1 18 Days 10EN 1.4301 Equiv.No HardenedNo Surface Treatment20h6100 ～ 4005 ～ 1005 ～ 505 ～ 10015 ～ 1710 ～ 16
1 18 Days 10EN 1.4301 Equiv.No HardenedNo Surface Treatment25h6100 ～ 5005 ～ 1005 ～ 605 ～ 10017 ～ 2010 ～ 19
1 18 Days 10EN 1.4301 Equiv.No HardenedNo Surface Treatment30h6100 ～ 50010 ～ 12510 ～ 6010 ～ 12520 ～ 2514 ～ 24
1 18 Days 10EN 1.4301 Equiv.No HardenedNo Surface Treatment35h6100 ～ 50010 ～ 15010 ～ 7010 ～ 15025 ～ 3014 ～ 29
1 18 Days 10EN 1.4301 Equiv.No HardenedNo Surface Treatment40h6200 ～ 50015 ～ 15015 ～ 7015 ～ 15030 ～ 3520 ～ 29
1 18 Days 10EN 1.4301 Equiv.No HardenedNo Surface Treatment50h6200 ～ 50020 ～ 15020 ～ 7020 ～ 15040 ～ 4520 ～ 44

Loading...

  1. 1

Specifications/Overview

■Selection of Driving Shaft
In selecting a driving shaft, select the basic shape and size from the specification table, then select necessary alterations such as thread machining, keyway addition etc.

 

[Selection Example of Part Number]
·Alteration Selection: Two Threaded Ends, Two Keyways


 

Driving Shaft - One End Stepped, One End Double Stepped Type: Related Image

[App. Example]

Driving Shaft - One End Stepped, One End Double Stepped Type: Related Image

 

Basic information

Basic Shape One End Double Stepped One End Stepped

Configure

Clear all

51Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Material

    • EN 1.1191 Equiv.
    • EN 1.4301 Equiv.

    Clear

  • Hardness

    • No Hardened

    Clear

  • Surface Treatment

    • No Surface Treatment
    • Surface Treatment Provided
      • Black Oxide
      • Electroless Nickel Plating

    Clear

  • Shaft Dia. D(mm)

    • 10
    • 12
    • 15
    • 20
    • 25
    • 30
    • 35
    • 40
    • 50

    Clear

  • Shaft Tolerance

    • h6
    • h7

    Clear

  • L(mm)

     [50-500/0.5mm Unit(s)]

    Clear

  • LA(mm)

     [4-150/0.5mm Unit(s)]

    Clear

  • LB(mm)

     [4-70/0.5mm Unit(s)]

    Clear

  • LC(mm)

     [4-150/0.5mm Unit(s)]

    Clear

  • P(mm)

    • 6
    • 8
    • 10
    • 12
    • 15
    • 17
    • 20
    • 25
    • 30
    • 35
    • 40
    • 45

    Clear

  • Q(mm)

     [5-44/1mm Unit(s)]

    Clear

  • Type

    • KZDC
    • KZDE
    • KZDF
    • KZDN
    • KZDP
    • KZDS

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less
    • 16 Days or Less
    • 18 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.