• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Ball Splines / Both Ends Tapped

Ball Splines / Both Ends Tapped

Click on this image to zoom in.

Click on this image to zoom in.

MISUMI

MISUMI

(i)Remark

  • The spline nut key or the positional relationship between the mounting hole and any alteration, including wrench flats, set screw flats, keyways, etc., cannot be specified. The alteration position displayed in the 3D preview is only an example and differs from the actual machining position
  • Please check the content on our website as the PDF does not contain the most up-to-date information.

Data sheet

Unit еxample related to this product
Pick and place mechanism with ball spline
Search for оther еxamples

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Dimensional Drawing

Flange type nut orientation
● 1-Nut Type
● 2-Nut Type
[ ! ] When selecting Overall Length (L Dimension), check the annealing range. 
[ ! ] For the included nut, please select a shape from below.
 
■Round Flanged
 
■Compact Flanged
 
■Straight Nuts 
[A]Dimension of Included Key
[ ! ] Do not machine the nut as it will adversely affect accuracy.
[ ! ] The key is press fit into the nut.
Both Ends
Female Thread		Spline Shaft [M] EN 1.3505 Equiv., Nut [M] EN 1.7242 Equiv.
[H]Hardness: 58 HRC or more		Spline Shaft and Nut [M] Material: EN 1.4125 Equiv.
[H]Hardness: 55 HRC or more
Nut 1 pc.Nut 2 pcs.Nut 1 pc.
With Round Flange NutBSHMBSH2MBASBFS
With Compact Flange NutBSHNBSH2N—
With Straight NutBSHSBSH2SBASBSS
[ ! ] Hardening of this product is induction hardening. (Depth: Approx. 1 mm to 2 mm)

[ ! ] Spline Shafts are hardened, and need to be annealed before machining.

[ ! ] As the accuracy is guaranteed as a set of nut and shaft, they are not sold separately.

[ ! ] A dust-proof seal is attached to the nut, so the balls will not fall off even if the spline shaft is pulled out.
(If the spline shaft is inserted at an angle to the nut, the ball may fall out.)

Specification Table

Part Number—L—M—N

Ball Splines - Both Ends Tapped: Related Image
Ball Splines - Both Ends Tapped: Related Image		BSHS8
BSHS8G
BSHS8L		—
—
—		270
270
270		—
—
—		M4
M4
M4		—
—
—		N4
N4
N4
Alternative grease types are available.
■Spline Shafts
Part NumberL: 1 mm IncrementsM (Coarse), N (Coarse)
Selection		DMass
(kg/m)
TypeNo.1-Nut Type2-Nut Type
BSHM
BSHN
BSHS
BSH2M
BSH2N
BSH2S
BASBFS
BASBSS 		* 660 to 500 (200)60 to 5003       60.23
* 860 to 600 (200)60 to 60034      80.39
* 1060 to 800 (400)90 to 800345     10.40.65
* 1360 to 800 (400)100 to 800 456    13.41.11
* 1670 to 1000 (400)110 to 1000 4568   16.61.65
2080 to 1000130 to 1000  56810  20.62.57
2590 to 1300150 to 1300  5681012 25.84.04
30100 to 1300170 to 1300   6810121630.85.85
[ ! ] For BASBFS and BASBSS, only * marked sizes are available, and the Max. L dimension is in ( ).
[ ! ] For BSHN and BSH2N, only No. 6, 8 and 10 are available.
[ ! ] Operating Temp.: Plastic components are used in ball spline assemblies. Avoid using in high temperature environments: keep below 80°C.

[ ! ] Lubrication: Ball splines are lubricated at the time of shipment, but should be re-lubricated after installation in equipment.
After you start using the vehicle, fill the grease every 100 km.
For re-lubrication, Lithium soap-based grease (Alvania Grease S2 by Showa Shell Sekiyu) is recommended.

■Round Flange Nuts, Compact Flange Nuts
No.D
(h6)		LdfHP.C.D.d1d2hWdBBasic Rated TorqueBasic Load RatingAllowable Static MomentMass
(kg)
Dynamic Ct
(N⋅m)		Static C0 t
(N⋅m)		Dynamic C
(kN)		Static C0
(kN)		M01
(N⋅m)		M02
(N⋅m)
61425306223.563.16.51.5183.871.22.15360.03
8163224214.88.71.22.15360.04
102140 (33)42 (41)6 (8)32 (30)4.584.4 (5.3)14 (8.5)2519 (11)34 (21)3.8 (2.4)6.9 (4.3)26 (15)181 (102)0.09
132444 (36)44 (45)7 (8)33 (34)15 (10)—28 (20)52 (37)4.6 (3.3)8.3 (5.9)36 (22)251 (148)0.11
163150517404.41851936.211.1563860.2
203563589455.59.55.422.52851548.515.3836110.3
254271655226.519334815.427.717312480.4
3047807510606.6116.5302.527249018.533.321215810.57
[!] Dimensions in () are for EN 1.4125 Equiv.. [!] Allowable static moment M01 are values measured when a single nut is used, and M02 are values measured when two nuts are used in contact.
■Straight Nuts
No.D
(h6)		Lb t
(+0.05
0)		dαBasic Rated TorqueBasic Load RatingAllowable Static MomentMass
(kg)		Dimensions of Key (Included)
ToleranceDynamic Ct
(N⋅m)		Static C0 t
(N⋅m)		Dynamic C
(kN)		Static C0
(kN)		M01
(N⋅m)		M02
(N⋅m)		B h L1R
ToleranceTolerance
614252.5+0.014
0		1.21.515°3.871.22.15360.0122.5+0.016
+0.006		2.50
−0.025		10.51.25
81625°4.88.71.22.15360.01310.5
102140 (33)31.5—19 (11)34 (21)3.8 (2.4)6.9 (4.3)26 (15)181 (102)0.063317 (14)1.5
132444 (36)28 (20)52 (37)4.6 (3.3)8.3 (5.9)36 (22)251 (148)0.0717 (14)
1631503.5+0.018
0		251936.211.1563860.153.5+0.024
+0.012		3.50
−0.030		181.75
20356342.52851548.515.3836110.244292
25427119334815.427.717312480.2933
3047802.527249018.533.321215810.3742
[!] Dimensions in () are for EN 1.4125 Equiv. [!] Allowable static moment M01 are values measured when a single nut is used, and M02 are values measured when two nuts are used in contact.

Alterations

Part Number—L—M—N—(SC·FC)
BSHN10—270—M5—N5—SC15
AlterationsWrench FlatsSet Screw Flat
CodeSCFC
Spec.
Adds a wrench flat.
SC = 1 mm Increments
[ ! ] SC+ℓ1 ≤ L
No.Wℓ1
658
87
108
131110
1614
2017
252215
3027
Adds a set screw flat.
Ordering Code FC10-A8
FC, A = 1 mm Increments
[ ! ] FC ≤ 3 × D
[ ! ] 1.5 × D < FC
When 1.5 x D < FC, FC ≤ L/2
[ ! ] A = 0 or
A ≥ 2
No.h
61
8
10
13
16
202
25
30
[ ! ] When selecting multiple alterations, the distance between machined areas should be 2 mm or more.
[ ! ] The angles / positions of alterations such as wrench flats, set screw flat, and keyway are not on the same plane.
[ ! ] It is not possible to specify the key of the spline nut or the positional relationship between the mounting hole and alteration.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. 3
  4. Next >>
Part Number
BASBFS6-[60-190/1]-M3-N3
BASBFS6G-[60-190/1]-M3-N3
BASBFS6L-[60-190/1]-M3-N3
BASBFS8-[60-190/1]-M[3,​4]-N[3,​4]
BASBFS8G-[60-190/1]-M[3,​4]-N[3,​4]
BASBFS8L-[60-190/1]-M[3,​4]-N[3,​4]
BASBFS10-[60-390/1]-M[3,​4,​5]-N[3,​4,​5]
BASBFS10G-[60-390/1]-M[3,​4,​5]-N[3,​4,​5]
BASBFS10L-[60-390/1]-M[3,​4,​5]-N[3,​4,​5]
BASBFS13-[60-390/1]-M[4,​5,​6]-N[4,​5,​6]
BASBFS13G-[60-390/1]-M[4,​5,​6]-N[4,​5,​6]
BASBFS13L-[60-390/1]-M[4,​5,​6]-N[4,​5,​6]
BASBFS16-[70-390/1]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BASBFS16G-[70-390/1]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BASBFS16L-[70-390/1]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BASBSS6-[60-190/1]-M3-N3
BASBSS6G-[60-190/1]-M3-N3
BASBSS6L-[60-190/1]-M3-N3
BASBSS8-[60-190/1]-M[3,​4]-N[3,​4]
BASBSS8G-[60-190/1]-M[3,​4]-N[3,​4]
BASBSS8L-[60-190/1]-M[3,​4]-N[3,​4]
BASBSS10-[60-390/1]-M[3,​4,​5]-N[3,​4,​5]
BASBSS10G-[60-390/1]-M[3,​4,​5]-N[3,​4,​5]
BASBSS10L-[60-390/1]-M[3,​4,​5]-N[3,​4,​5]
BASBSS13-[60-390/1]-M[4,​5,​6]-N[4,​5,​6]
BASBSS13G-[60-390/1]-M[4,​5,​6]-N[4,​5,​6]
BASBSS13L-[60-390/1]-M[4,​5,​6]-N[4,​5,​6]
BASBSS16-[70-390/1]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BASBSS16G-[70-390/1]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BASBSS16L-[70-390/1]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSH2M6-[60-400/1]-M3-N3
BSH2M6G-[60-400/1]-M3-N3
BSH2M6L-[60-400/1]-M3-N3
BSH2M8-[60-400/1]-M[3,​4]-N[3,​4]
BSH2M8G-[60-400/1]-M[3,​4]-N[3,​4]
BSH2M8L-[60-400/1]-M[3,​4]-N[3,​4]
BSH2M10-[90-600/1]-M[3,​4,​5]-N[3,​4,​5]
BSH2M10G-[90-600/1]-M[3,​4,​5]-N[3,​4,​5]
BSH2M10L-[90-600/1]-M[3,​4,​5]-N[3,​4,​5]
BSH2M13-[100-600/1]-M[4,​5,​6]-N[4,​5,​6]
BSH2M13G-[100-600/1]-M[4,​5,​6]-N[4,​5,​6]
BSH2M13L-[100-600/1]-M[4,​5,​6]-N[4,​5,​6]
BSH2M16-[110-600/1]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSH2M16G-[110-600/1]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSH2M16L-[110-600/1]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSH2M20-[130-700/1]-M[5,​6,​8,​10]-N[5,​6,​8,​10]
BSH2M20G-[130-700/1]-M[5,​6,​8,​10]-N[5,​6,​8,​10]
BSH2M20L-[130-700/1]-M[5,​6,​8,​10]-N[5,​6,​8,​10]
BSH2M25-[150-900/1]-M[5,​6,​8,​10,​12]-N[5,​6,​8,​10,​12]
BSH2M25G-[150-900/1]-M[5,​6,​8,​10,​12]-N[5,​6,​8,​10,​12]
BSH2M25L-[150-900/1]-M[5,​6,​8,​10,​12]-N[5,​6,​8,​10,​12]
BSH2M30-[170-1150/1]-M[6,​8,​10,​12,​16]-N[6,​8,​10,​12,​16]
BSH2M30G-[170-1150/1]-M[6,​8,​10,​12,​16]-N[6,​8,​10,​12,​16]
BSH2M30L-[170-1150/1]-M[6,​8,​10,​12,​16]-N[6,​8,​10,​12,​16]
BSH2N6-[60-400/1]-M3-N3
BSH2N6G-[60-400/1]-M3-N3
BSH2N6L-[60-400/1]-M3-N3
BSH2N8-[60-400/1]-M[3,​4]-N[3,​4]
BSH2N8G-[60-400/1]-M[3,​4]-N[3,​4]
BSH2N8L-[60-400/1]-M[3,​4]-N[3,​4]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSNut type Shaft O.D. D
(φ) 		Shaft material Number of nuts
(pcs.) 		Nut Overall Length
(mm) 		Nut O.D.
(φ) 		Shaft Overall Length L
(mm) 		Basic Load Rating Dynamic Rating
(N) 		Allowable Torque
(Nm) 		Nut Material Grease M
(mm) 		N
(mm)

-

1 9 Days 10[Flange Type] Round Flanged6EN 1.4125 Equiv.1251460 ～ 19012003.8EN 1.4125 Equiv.Standard (S2)33

-

1 11 Days 10[Flange Type] Round Flanged6EN 1.4125 Equiv.1251460 ～ 19012003.8EN 1.4125 Equiv.LG233

-

1 11 Days 10[Flange Type] Round Flanged6EN 1.4125 Equiv.1251460 ～ 19012003.8EN 1.4125 Equiv.ET-100K33

-

1 9 Days 10[Flange Type] Round Flanged8EN 1.4125 Equiv.1251660 ～ 19012004.8EN 1.4125 Equiv.Standard (S2)3 ～ 43 ～ 4

-

1 11 Days 10[Flange Type] Round Flanged8EN 1.4125 Equiv.1251660 ～ 19012004.8EN 1.4125 Equiv.LG23 ～ 43 ～ 4

-

1 11 Days 10[Flange Type] Round Flanged8EN 1.4125 Equiv.1251660 ～ 19012004.8EN 1.4125 Equiv.ET-100K3 ～ 43 ～ 4

-

1 9 Days 10[Flange Type] Round Flanged10.4EN 1.4125 Equiv.1332160 ～ 390240011EN 1.4125 Equiv.Standard (S2)3 ～ 53 ～ 5

-

1 11 Days 10[Flange Type] Round Flanged10.4EN 1.4125 Equiv.1332160 ～ 390240011EN 1.4125 Equiv.LG23 ～ 53 ～ 5

-

1 11 Days 10[Flange Type] Round Flanged10.4EN 1.4125 Equiv.1332160 ～ 390240011EN 1.4125 Equiv.ET-100K3 ～ 53 ～ 5

-

1 9 Days 10[Flange Type] Round Flanged13.4EN 1.4125 Equiv.1362460 ～ 390330020EN 1.4125 Equiv.Standard (S2)4 ～ 64 ～ 6

-

1 11 Days 10[Flange Type] Round Flanged13.4EN 1.4125 Equiv.1362460 ～ 390330020EN 1.4125 Equiv.LG24 ～ 64 ～ 6

-

1 11 Days 10[Flange Type] Round Flanged13.4EN 1.4125 Equiv.1362460 ～ 390330020EN 1.4125 Equiv.ET-100K4 ～ 64 ～ 6

-

1 9 Days 10[Flange Type] Round Flanged16.6EN 1.4125 Equiv.1503170 ～ 390620051EN 1.4125 Equiv.Standard (S2)4 ～ 84 ～ 8

-

1 11 Days 10[Flange Type] Round Flanged16.6EN 1.4125 Equiv.1503170 ～ 390620051EN 1.4125 Equiv.LG24 ～ 84 ～ 8

-

1 11 Days 10[Flange Type] Round Flanged16.6EN 1.4125 Equiv.1503170 ～ 390620051EN 1.4125 Equiv.ET-100K4 ～ 84 ～ 8

-

1 9 Days 10Straight6EN 1.4125 Equiv.1251460 ～ 19012003.8EN 1.4125 Equiv.Standard (S2)33

-

1 11 Days 10Straight6EN 1.4125 Equiv.1251460 ～ 19012003.8EN 1.4125 Equiv.LG233

-

1 11 Days 10Straight6EN 1.4125 Equiv.1251460 ～ 19012003.8EN 1.4125 Equiv.ET-100K33

-

1 9 Days 10Straight8EN 1.4125 Equiv.1251660 ～ 19012004.8EN 1.4125 Equiv.Standard (S2)3 ～ 43 ～ 4

-

1 11 Days 10Straight8EN 1.4125 Equiv.1251660 ～ 19012004.8EN 1.4125 Equiv.LG23 ～ 43 ～ 4

-

1 11 Days 10Straight8EN 1.4125 Equiv.1251660 ～ 19012004.8EN 1.4125 Equiv.ET-100K3 ～ 43 ～ 4

-

1 9 Days -Straight10.4EN 1.4125 Equiv.1332160 ～ 390240011EN 1.4125 Equiv.Standard (S2)3 ～ 53 ～ 5

-

1 11 Days 10Straight10.4EN 1.4125 Equiv.1332160 ～ 390240011EN 1.4125 Equiv.LG23 ～ 53 ～ 5

-

1 11 Days 10Straight10.4EN 1.4125 Equiv.1332160 ～ 390240011EN 1.4125 Equiv.ET-100K3 ～ 53 ～ 5

-

1 9 Days 10Straight13.4EN 1.4125 Equiv.1362460 ～ 390330020EN 1.4125 Equiv.Standard (S2)4 ～ 64 ～ 6

-

1 11 Days 10Straight13.4EN 1.4125 Equiv.1362460 ～ 390330020EN 1.4125 Equiv.LG24 ～ 64 ～ 6

-

1 11 Days 10Straight13.4EN 1.4125 Equiv.1362460 ～ 390330020EN 1.4125 Equiv.ET-100K4 ～ 64 ～ 6

-

1 9 Days 10Straight16.6EN 1.4125 Equiv.1503170 ～ 390620051EN 1.4125 Equiv.Standard (S2)4 ～ 84 ～ 8

-

1 11 Days 10Straight16.6EN 1.4125 Equiv.1503170 ～ 390620051EN 1.4125 Equiv.LG24 ～ 84 ～ 8

-

1 11 Days 10Straight16.6EN 1.4125 Equiv.1503170 ～ 390620051EN 1.4125 Equiv.ET-100K4 ～ 84 ～ 8

-

1 10 Days 10[Flange Type] Round Flanged6EN 1.3505 Equiv.2251460 ～ 40012003.8EN 1.7242 Equiv.Standard (S2)33

-

1 12 Days 10[Flange Type] Round Flanged6EN 1.3505 Equiv.2251460 ～ 40012003.8EN 1.7242 Equiv.LG233

-

1 12 Days 10[Flange Type] Round Flanged6EN 1.3505 Equiv.2251460 ～ 40012003.8EN 1.7242 Equiv.ET-100K33

-

1 10 Days 10[Flange Type] Round Flanged8EN 1.3505 Equiv.2251660 ～ 40012004.8EN 1.7242 Equiv.Standard (S2)3 ～ 43 ～ 4

-

1 12 Days 10[Flange Type] Round Flanged8EN 1.3505 Equiv.2251660 ～ 40012004.8EN 1.7242 Equiv.LG23 ～ 43 ～ 4

-

1 12 Days 10[Flange Type] Round Flanged8EN 1.3505 Equiv.2251660 ～ 40012004.8EN 1.7242 Equiv.ET-100K3 ～ 43 ～ 4

-

1 10 Days 10[Flange Type] Round Flanged10.4EN 1.3505 Equiv.2402190 ～ 600380019EN 1.7242 Equiv.Standard (S2)3 ～ 53 ～ 5

-

1 12 Days 10[Flange Type] Round Flanged10.4EN 1.3505 Equiv.2402190 ～ 600380019EN 1.7242 Equiv.LG23 ～ 53 ～ 5

-

1 12 Days 10[Flange Type] Round Flanged10.4EN 1.3505 Equiv.2402190 ～ 600380019EN 1.7242 Equiv.ET-100K3 ～ 53 ～ 5

-

1 10 Days 10[Flange Type] Round Flanged13.4EN 1.3505 Equiv.24424100 ～ 600460028EN 1.7242 Equiv.Standard (S2)4 ～ 64 ～ 6

-

1 12 Days 10[Flange Type] Round Flanged13.4EN 1.3505 Equiv.24424100 ～ 600460028EN 1.7242 Equiv.LG24 ～ 64 ～ 6

-

1 12 Days 10[Flange Type] Round Flanged13.4EN 1.3505 Equiv.24424100 ～ 600460028EN 1.7242 Equiv.ET-100K4 ～ 64 ～ 6

-

1 10 Days 10[Flange Type] Round Flanged16.6EN 1.3505 Equiv.25031110 ～ 600620051EN 1.7242 Equiv.Standard (S2)4 ～ 84 ～ 8

-

1 12 Days 10[Flange Type] Round Flanged16.6EN 1.3505 Equiv.25031110 ～ 600620051EN 1.7242 Equiv.LG24 ～ 84 ～ 8

-

1 12 Days 10[Flange Type] Round Flanged16.6EN 1.3505 Equiv.25031110 ～ 600620051EN 1.7242 Equiv.ET-100K4 ～ 84 ～ 8

-

1 10 Days 10[Flange Type] Round Flanged20.6EN 1.3505 Equiv.26335130 ～ 700850085EN 1.7242 Equiv.Standard (S2)5 ～ 105 ～ 10

-

1 12 Days 10[Flange Type] Round Flanged20.6EN 1.3505 Equiv.26335130 ～ 700850085EN 1.7242 Equiv.LG25 ～ 105 ～ 10

-

1 12 Days 10[Flange Type] Round Flanged20.6EN 1.3505 Equiv.26335130 ～ 700850085EN 1.7242 Equiv.ET-100K5 ～ 105 ～ 10

-

1 10 Days 10[Flange Type] Round Flanged25.8EN 1.3505 Equiv.27142150 ～ 90015400193EN 1.7242 Equiv.Standard (S2)5 ～ 125 ～ 12

-

1 12 Days 10[Flange Type] Round Flanged25.8EN 1.3505 Equiv.27142150 ～ 90015400193EN 1.7242 Equiv.LG25 ～ 125 ～ 12

-

1 12 Days 10[Flange Type] Round Flanged25.8EN 1.3505 Equiv.27142150 ～ 90015400193EN 1.7242 Equiv.ET-100K5 ～ 125 ～ 12

-

1 10 Days 10[Flange Type] Round Flanged30.8EN 1.3505 Equiv.28047170 ～ 115018500272EN 1.7242 Equiv.Standard (S2)6 ～ 166 ～ 16

-

1 12 Days 10[Flange Type] Round Flanged30.8EN 1.3505 Equiv.28047170 ～ 115018500272EN 1.7242 Equiv.LG26 ～ 166 ～ 16

-

1 12 Days 10[Flange Type] Round Flanged30.8EN 1.3505 Equiv.28047170 ～ 115018500272EN 1.7242 Equiv.ET-100K6 ～ 166 ～ 16

-

1 10 Days 10[Flange Type] Compact Flanged6EN 1.3505 Equiv.2251460 ～ 40012003.8EN 1.7242 Equiv.Standard (S2)33

-

1 12 Days 10[Flange Type] Compact Flanged6EN 1.3505 Equiv.2251460 ～ 40012003.8EN 1.7242 Equiv.LG233

-

1 12 Days 10[Flange Type] Compact Flanged6EN 1.3505 Equiv.2251460 ～ 40012003.8EN 1.7242 Equiv.ET-100K33

-

1 10 Days 10[Flange Type] Compact Flanged8EN 1.3505 Equiv.2251660 ～ 40012004.8EN 1.7242 Equiv.Standard (S2)3 ～ 43 ～ 4

-

1 12 Days 10[Flange Type] Compact Flanged8EN 1.3505 Equiv.2251660 ～ 40012004.8EN 1.7242 Equiv.LG23 ～ 43 ～ 4

-

1 12 Days 10[Flange Type] Compact Flanged8EN 1.3505 Equiv.2251660 ～ 40012004.8EN 1.7242 Equiv.ET-100K3 ～ 43 ～ 4

Loading...

  1. 1
  2. 2
  3. 3
  4. Next >>

Specifications/Overview

 
Precautions for Ball Spline Assembly
■Check Assembly Position
  Match Mark Numbers are entered on nuts and spline shafts (see the diagram on the right).
  When re-assembling, confirm the match mark numbers, character orientations, and positional relationship of parts.
  If the alignment marks are not aligned correctly, the function will be affected.
■Tolerance for Mating Bores
  H7 tolerance is recommended for mating bores for the spline nuts when mounting them on housings.
■For Customers machining the shaft ends
  In order to facilitate nut insertions, chamfer the machined shaft ends,
and remove burrs on the edges of the spline groove with a round file.
 

Basic information

Shaft end shape (left) Tapped Shaft end shape (right) Tapped Type Solid
Torque Middle Torque Nut length Standard Preload Standard
Accuracy Grade Standard Grade The circulation type of balls 1-fach

Configure

Clear all

144Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Nut type

    • Straight
    • Flange Type
      • Compact Flanged
      • Round Flanged

    Clear

  • Shaft O.D. D(φ)

    • 6
    • 8
    • 10.4
    • 13.4
    • 16.6
    • 20.6
    • 25.8
    • 30.8

    Clear

  • Shaft material

    • EN 1.3505 Equiv.
    • EN 1.4125 Equiv.

    Clear

  • Number of nuts(pcs.)

    • 1
    • 2

    Clear

  • Nut Overall Length(mm)

    • 25
    • 33
    • 36
    • 40
    • 44
    • 50
    • 63
    • 71
    • 80

    Clear

  • Nut O.D.(φ)

    • 14
    • 16
    • 21
    • 24
    • 31
    • 35
    • 42
    • 47

    Clear

  • Shaft Overall Length L(mm)

     [60-1300/1mm Unit(s)]

    Clear

  • Nut Material

    • EN 1.4125 Equiv.
    • EN 1.7242 Equiv.

    Clear

  • Grease

    • ET-100K
    • LG2
    • Standard (S2)

    Clear

  • M(mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16

    Clear

  • N(mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16

    Clear

  • Type

    • BASBFS
    • BASBSS
    • BSH2M
    • BSH2N
    • BSH2S
    • BSHM
    • BSHN
    • BSHS

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less
    • 10 Days or Less
    • 11 Days or Less
    • 12 Days or Less

    Reset

Optional Attributes

Complementary Products

MISUMI Unit еxample related to this product

Search for оther еxamples

back next

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.