• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Ball Splines / Both Ends Stepped Tapped

Ball Splines / Both Ends Stepped Tapped

Click on this image to zoom in.

Click on this image to zoom in.

MISUMI

MISUMI

(i)Remark

  • Please check the content on our website as the PDF does not contain the most up-to-date information.

Data sheet

Unit еxample related to this product
Workpiece Gripper Unit with Suction Cups
Search for оther еxamples

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Flange type nut orientation
● 1-Nut Type
● 2-Nut Type
 
[ ! ] For the included nut, please select a shape from below.
 
■Round Flanged
 
■Compact Flanged
 
■Straight Nuts 
[A]Dimension of Included Key

[ ! ] Do not machine the nut as it will adversely affect accuracy.
[ ! ] The key is press fit into the nut.
 
Both Ends Stepped and
Tapped		Spline Shaft [M] EN 1.3505 Equiv., Nut [M] EN 1.7242 Equiv.
[H]Hardness: 58HRC or more		Spline Shaft and Nut [M] Material: EN 1.4125 Equiv.
[H]Hardness: 55 HRC or more
Nut 1 pc.Nut 1 pc.
With Round Flange NutBSLMBSLMS
With Compact Flange NutBSLN—
With Straight NutBSLSBSLSS
[ ! ] As the accuracy is guaranteed as a set of nut and shaft, they are not sold separately.

Specification Table

Part Number—L—F—E—P—Q—M—N
　BSLM13
Ball Splines - Both Ends Stepped and Tapped: Related ImageBSLM13G
Ball Splines - Both Ends Stepped and Tapped: Related ImageBSLM13L		—
—
—		250
250
250		—
—
—		F25
F25
F25		—
—
—		E10
E10
E10		—
—
—		P10
P10
P10		—
—
—		Q8
Q8
Q8		—
—
—		M5
M5
M5		—
—
—		N5
N5
N5
Alternative grease types are available.
■Spline Shafts
Part Number1 mm IncrementsP·Q
Selection		M (Coarse), N (Coarse)
Selection
(M+3 ≤ P·N+3 ≤ Q)		D(Y)Mass
(kg/m)
TypeNo.LF·E1-Nut Type
1-Nut TypeMin to Max
BSLM
BSLN
BSLS
BSLMS
BSLSS 		* 860 to 600 (190)2 ≤ F ≤ P × 5
2 ≤ E ≤ Q × 5		6        3        856 to 396 (186)0.39
* 1060 to 800 (390)68       34       10.456 to 596 (386)0.65
* 1360 to 800 (390)6810      3456     13.456 to 596 (386)1.11
* 1670 to 1000 (390)68101213    3456810   16.666 to 596 (386)1.65
2080 to 1000 81012131516   45681012  20.676 to 6962.57
2590 to 1300 8101213151620  4568101216 25.886 to 8964.04
30100 to 1300  10121315162025 45681012162030.896 to 11465.85
[ ! ] For BSLMS and BSLSS, only * marked sizes are available, and the Max. L and Y dimensions are in ( ).
[ ! ] For BSLN, only No. 8 and 10 are available.
■Round Flange Nuts, Compact Flange Nuts
No.D
(h6)		LdfHP.C.D.d1d2hWdBBasic Rated TorqueBasic Load RatingAllowable Static MomentMass
(kg)
Dynamic Ct
(N⋅m)		Static C0 t
(N⋅m)		Dynamic C
(kN)		Static C0
(kN)		M01
(N⋅m)		M02
(N⋅m)
81625326243.563.16.51.5214.88.71.22.15360.04
102140 (33)42 (41)6 (8)32 (30)4.584.4 (5.3)14 (8.5)2519 (11)34 (21)3.8 (2.4)6.9 (4.3)26 (15)181 (102)0.09
132444 (36)44 (45)7 (8)33 (34)15 (10)—28 (20)52 (37)4.6 (3.3)8.3 (5.9)36 (22)251 (148)0.11
163150517404.41851936.211.1563860.2
203563589455.59.55.422.52851548.515.3836110.3
254271655226.519334815.427.717312480.4
3047807510606.6116.5302.527249018.533.321215810.57
[!] Dimensions in () are for EN 1.4125 Equiv. [!] Allowable static moment M01 are values measured when a single nut is used, and M02 are values measured when two nuts are used in contact.
■Straight Nuts
No.D
(h6)		Lb t
(+0.05
0)		dαBasic Rated TorqueBasic Load RatingAllowable Static MomentMass
(kg)		Dimensions of Key (Included)
ToleranceDynamic Ct
(N⋅m)		Static C0 t
(N⋅m)		Dynamic C
(kN)		Static C0
(kN)		M01
(N⋅m)		M02
(N⋅m)		B h L1R
ToleranceTolerance
816252.5+0.014
0		1.21.525°4.88.71.22.15360.0132.5+0.016
+0.006		2.50
−0.025		10.51.25
102140 (33)31.5—19 (11)34 (21)3.8 (2.4)6.9 (4.3)26 (15)181 (102)0.063317 (14)1.5
132444 (36)28 (20)52 (37)4.6 (3.3)8.3 (5.9)36 (22)251 (148)0.0717 (14)
1631503.5+0.018
0		251936.211.1563860.153.5+0.024
+0.012		3.50
−0.030		181.75
20356342.52851548.515.3836110.244292
25427119334815.427.717312480.2933
3047802.527249018.533.321215810.3742
[!] Dimensions in () are for EN 1.4125 Equiv. [!] Allowable static moment M01 are values measured when a single nut is used, and M02 are values measured when two nuts are used in contact.
 

Alterations

Part Number—L—F—E—P—Q—M—N—(SC·FC·NTW)
BSLM13—250—F25—E10—P10—Q8—M5—N5—SC15
AlterationsWrench FlatsSet Screw FlatAdditional Spline Nuts
CodeSCFCNTW
Spec.
Adds a wrench flat.
SC = 1 mm Increments
[ ! ] SC+ℓ1 ≤ Y
No.Wℓ1
8
78
108
131110
1614
2017
252215
3027
Adds a set screw flat.
Ordering Code FC10-A8
FC, A = 1 mm Increments
[ ! ] FC ≤ 3 × D
[ ! ] When 1.5 × D < FC,
FC ≤ Y/2
[ ! ] A = 0 or
A ≥ 2
No.h
81
10
13
16
202
25
30
Adds a nut.
(from one to two)
[ ! ] BSLS·BSLM
Applicable to BSLN only
[ ! ] When selecting multiple alterations, the distance between machined areas should be 2 mm or more.
[ ! ] It is not possible to specify the key of the spline nut or the positional relationship between the mounting hole and alteration.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. Next >>
Part Number
BSLM8-[60-400/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3
BSLM8G-[60-400/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3
BSLM8L-[60-400/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3
BSLM10-[60-600/1]-F[2-31/1]-E[2-31/1]-P[6,​8]-Q[6,​8]-M[3,​4]-N[3,​4]
BSLM10G-[60-600/1]-F[2-31/1]-E[2-31/1]-P[6,​8]-Q[6,​8]-M[3,​4]-N[3,​4]
BSLM10L-[60-600/1]-F[2-31/1]-E[2-31/1]-P[6,​8]-Q[6,​8]-M[3,​4]-N[3,​4]
BSLM13-[60-600/1]-F[2-50/1]-E[2-50/1]-P[6,​8,​10]-Q[6,​8,​10]-M[3,​4,​5,​6]-N[3,​4,​5,​6]
BSLM13G-[60-600/1]-F[2-50/1]-E[2-50/1]-P[6,​8,​10]-Q[6,​8,​10]-M[3,​4,​5,​6]-N[3,​4,​5,​6]
BSLM13L-[60-600/1]-F[2-50/1]-E[2-50/1]-P[6,​8,​10]-Q[6,​8,​10]-M[3,​4,​5,​6]-N[3,​4,​5,​6]
BSLM16-[70-600/1]-F[2-65/1]-E[2-65/1]-P[6,​8,​10,​12,​13]-Q[6,​8,​10,​12,​13]-M[3,​4,​5,​6,​8,​10]-N[3,​4,​5,​6,​8,​10]
BSLM16G-[70-600/1]-F[2-65/1]-E[2-65/1]-P[6,​8,​10,​12,​13]-Q[6,​8,​10,​12,​13]-M[3,​4,​5,​6,​8,​10]-N[3,​4,​5,​6,​8,​10]
BSLM16L-[70-600/1]-F[2-65/1]-E[2-65/1]-P[6,​8,​10,​12,​13]-Q[6,​8,​10,​12,​13]-M[3,​4,​5,​6,​8,​10]-N[3,​4,​5,​6,​8,​10]
BSLM20-[80-700/1]-F[2-80/1]-E[2-80/1]-P[8,​10,​12,​13,​15,​16]-Q[8,​10,​12,​13,​15,​16]-M[4,​5,​6,​8,​10,​12]-N[4,​5,​6,​8,​10,​12]
BSLM20G-[80-700/1]-F[2-80/1]-E[2-80/1]-P[8,​10,​12,​13,​15,​16]-Q[8,​10,​12,​13,​15,​16]-M[4,​5,​6,​8,​10,​12]-N[4,​5,​6,​8,​10,​12]
BSLM20L-[80-700/1]-F[2-80/1]-E[2-80/1]-P[8,​10,​12,​13,​15,​16]-Q[8,​10,​12,​13,​15,​16]-M[4,​5,​6,​8,​10,​12]-N[4,​5,​6,​8,​10,​12]
BSLM25-[90-900/1]-F[2-100/1]-E[2-100/1]-P[8,​10,​12,​13,​15,​16,​20]-Q[8,​10,​12,​13,​15,​16,​20]-M[4,​5,​6,​8,​10,​12,​16]-N[4,​5,​6,​8,​10,​12,​16]
BSLM25G-[90-900/1]-F[2-100/1]-E[2-100/1]-P[8,​10,​12,​13,​15,​16,​20]-Q[8,​10,​12,​13,​15,​16,​20]-M[4,​5,​6,​8,​10,​12,​16]-N[4,​5,​6,​8,​10,​12,​16]
BSLM25L-[90-900/1]-F[2-100/1]-E[2-100/1]-P[8,​10,​12,​13,​15,​16,​20]-Q[8,​10,​12,​13,​15,​16,​20]-M[4,​5,​6,​8,​10,​12,​16]-N[4,​5,​6,​8,​10,​12,​16]
BSLM30-[100-1150/1]-F[2-125/1]-E[2-125/1]-P[10,​12,​13,​15,​16,​20,​25]-Q[10,​12,​13,​15,​16,​20,​25]-M[4,​5,​6,​8,​10,​12,​16,​20]-N[4,​5,​6,​8,​10,​12,​16,​20]
BSLM30G-[100-1150/1]-F[2-125/1]-E[2-125/1]-P[10,​12,​13,​15,​16,​20,​25]-Q[10,​12,​13,​15,​16,​20,​25]-M[4,​5,​6,​8,​10,​12,​16,​20]-N[4,​5,​6,​8,​10,​12,​16,​20]
BSLM30L-[100-1150/1]-F[2-125/1]-E[2-125/1]-P[10,​12,​13,​15,​16,​20,​25]-Q[10,​12,​13,​15,​16,​20,​25]-M[4,​5,​6,​8,​10,​12,​16,​20]-N[4,​5,​6,​8,​10,​12,​16,​20]
BSLMS8-[60-190/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3
BSLMS8G-[60-190/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3
BSLMS8L-[60-190/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3
BSLMS10-[60-390/1]-F[2-40/1]-E[2-40/1]-P[6,​8]-Q[6,​8]-M[3,​4]-N[3,​4]
BSLMS10G-[60-390/1]-F[2-31/1]-E[2-31/1]-P[6,​8]-Q[6,​8]-M[3,​4]-N[3,​4]
BSLMS10L-[60-390/1]-F[2-31/1]-E[2-31/1]-P[6,​8]-Q[6,​8]-M[3,​4]-N[3,​4]
BSLMS13-[60-390/1]-F[2-50/1]-E[2-51/1]-P[6,​8,​10]-Q[6,​8,​10]-M[3,​4,​5,​6]-N[3,​4,​5,​6]
BSLMS13G-[60-390/1]-F[2-50/1]-E[2-50/1]-P[6,​8,​10]-Q[6,​8,​10]-M[3,​4,​5,​6]-N[3,​4,​5,​6]
BSLMS13L-[60-390/1]-F[2-50/1]-E[2-50/1]-P[6,​8,​10]-Q[6,​8,​10]-M[3,​4,​5,​6]-N[3,​4,​5,​6]
BSLMS16-[70-390/1]-F[2-65/1]-E[2-65/1]-P[6,​8,​10,​12,​13]-Q[6,​8,​10,​12,​13]-M[3,​4,​5,​6,​8,​10]-N[3,​4,​5,​6,​8,​10]
BSLMS16G-[70-390/1]-F[2-65/1]-E[2-65/1]-P[6,​8,​10,​12,​13]-Q[6,​8,​10,​12,​13]-M[3,​4,​5,​6,​8,​10]-N[3,​4,​5,​6,​8,​10]
BSLMS16L-[70-390/1]-F[2-65/1]-E[2-65/1]-P[6,​8,​10,​12,​13]-Q[6,​8,​10,​12,​13]-M[3,​4,​5,​6,​8,​10]-N[3,​4,​5,​6,​8,​10]
BSLN8-[60-400/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3
BSLN8G-[60-400/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3
BSLN8L-[60-400/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3
BSLN10-[60-600/1]-F[2-40/1]-E[2-40/1]-P[6,​8]-Q[6,​8]-M[3,​4]-N[3,​4]
BSLN10G-[60-600/1]-F[2-31/1]-E[2-31/1]-P[6,​8]-Q[6,​8]-M[3,​4]-N[3,​4]
BSLN10L-[60-600/1]-F[2-31/1]-E[2-31/1]-P[6,​8]-Q[6,​8]-M[3,​4]-N[3,​4]
BSLS8-[60-400/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3
BSLS8G-[60-400/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3
BSLS8L-[60-400/1]-F[2-30/1]-E[2-30/1]-P6-Q6-M3-N3
BSLS10-[60-600/1]-F[2-40/1]-E[2-40/1]-P[6,​8]-Q[6,​8]-M[3,​4]-N[3,​4]
BSLS10G-[60-600/1]-F[2-31/1]-E[2-31/1]-P[6,​8]-Q[6,​8]-M[3,​4]-N[3,​4]
BSLS10L-[60-600/1]-F[2-31/1]-E[2-31/1]-P[6,​8]-Q[6,​8]-M[3,​4]-N[3,​4]
BSLS13-[60-600/1]-F[2-50/1]-E[2-50/1]-P[6,​8,​10]-Q[6,​8,​10]-M[3,​4,​5,​6]-N[3,​4,​5,​6]
BSLS13G-[60-600/1]-F[2-50/1]-E[2-50/1]-P[6,​8,​10]-Q[6,​8,​10]-M[3,​4,​5,​6]-N[3,​4,​5,​6]
BSLS13L-[60-600/1]-F[2-50/1]-E[2-50/1]-P[6,​8,​10]-Q[6,​8,​10]-M[3,​4,​5,​6]-N[3,​4,​5,​6]
BSLS16-[70-600/1]-F[2-65/1]-E[2-65/1]-P[6,​8,​10,​12,​13]-Q[6,​8,​10,​12,​13]-M[3,​4,​5,​6,​8,​10]-N[3,​4,​5,​6,​8,​10]
BSLS16G-[70-600/1]-F[2-65/1]-E[2-65/1]-P[6,​8,​10,​12,​13]-Q[6,​8,​10,​12,​13]-M[3,​4,​5,​6,​8,​10]-N[3,​4,​5,​6,​8,​10]
BSLS16L-[70-600/1]-F[2-65/1]-E[2-65/1]-P[6,​8,​10,​12,​13]-Q[6,​8,​10,​12,​13]-M[3,​4,​5,​6,​8,​10]-N[3,​4,​5,​6,​8,​10]
BSLS20-[80-700/1]-F[2-80/1]-E[2-80/1]-P[8,​10,​12,​13,​15,​16]-Q[8,​10,​12,​13,​15,​16]-M[4,​5,​6,​8,​10,​12]-N[4,​5,​6,​8,​10,​12]
BSLS20G-[80-700/1]-F[2-80/1]-E[2-80/1]-P[8,​10,​12,​13,​15,​16]-Q[8,​10,​12,​13,​15,​16]-M[4,​5,​6,​8,​10,​12]-N[4,​5,​6,​8,​10,​12]
BSLS20L-[80-700/1]-F[2-80/1]-E[2-80/1]-P[8,​10,​12,​13,​15,​16]-Q[8,​10,​12,​13,​15,​16]-M[4,​5,​6,​8,​10,​12]-N[4,​5,​6,​8,​10,​12]
BSLS25-[90-900/1]-F[2-100/1]-E[2-100/1]-P[8,​10,​12,​13,​15,​16,​20]-Q[8,​10,​12,​13,​15,​16,​20]-M[4,​5,​6,​8,​10,​12,​16]-N[4,​5,​6,​8,​10,​12,​16]
BSLS25G-[90-900/1]-F[2-100/1]-E[2-100/1]-P[8,​10,​12,​13,​15,​16,​20]-Q[8,​10,​12,​13,​15,​16,​20]-M[4,​5,​6,​8,​10,​12,​16]-N[4,​5,​6,​8,​10,​12,​16]
BSLS25L-[90-900/1]-F[2-100/1]-E[2-100/1]-P[8,​10,​12,​13,​15,​16,​20]-Q[8,​10,​12,​13,​15,​16,​20]-M[4,​5,​6,​8,​10,​12,​16]-N[4,​5,​6,​8,​10,​12,​16]
BSLS30-[100-1150/1]-F[2-125/1]-E[2-125/1]-P[10,​12,​13,​15,​16,​20,​25]-Q[10,​12,​13,​15,​16,​20,​25]-M[4,​5,​6,​8,​10,​12,​16,​20]-N[4,​5,​6,​8,​10,​12,​16,​20]
BSLS30G-[100-1150/1]-F[2-125/1]-E[2-125/1]-P[10,​12,​13,​15,​16,​20,​25]-Q[10,​12,​13,​15,​16,​20,​25]-M[4,​5,​6,​8,​10,​12,​16,​20]-N[4,​5,​6,​8,​10,​12,​16,​20]
BSLS30L-[100-1150/1]-F[2-125/1]-E[2-125/1]-P[10,​12,​13,​15,​16,​20,​25]-Q[10,​12,​13,​15,​16,​20,​25]-M[4,​5,​6,​8,​10,​12,​16,​20]-N[4,​5,​6,​8,​10,​12,​16,​20]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSNut type Shaft O.D. D
(φ) 		Shaft material Nut Overall Length
(mm) 		Nut O.D.
(φ) 		Shaft Overall Length L
(mm) 		Basic Load Rating Dynamic Rating
(N) 		Allowable Torque
(Nm) 		Nut Material Grease E
(mm) 		F
(mm) 		M
(mm) 		N
(mm) 		P
(mm) 		Q
(mm)

-

1 10 Days 10[Flange Type] Round Flanged8EN 1.3505 Equiv.251660 ～ 40012004.8EN 1.7242 Equiv.Standard (S2)2 ～ 302 ～ 303366

-

1 12 Days 10[Flange Type] Round Flanged8EN 1.3505 Equiv.251660 ～ 40012004.8EN 1.7242 Equiv.LG22 ～ 302 ～ 303366

-

1 12 Days 10[Flange Type] Round Flanged8EN 1.3505 Equiv.251660 ～ 40012004.8EN 1.7242 Equiv.ET-100K2 ～ 302 ～ 303366

-

1 10 Days 10[Flange Type] Round Flanged10.4EN 1.3505 Equiv.402160 ～ 600380019EN 1.7242 Equiv.Standard (S2)2 ～ 312 ～ 313 ～ 43 ～ 46 ～ 86 ～ 8

-

1 12 Days 10[Flange Type] Round Flanged10.4EN 1.3505 Equiv.402160 ～ 600380019EN 1.7242 Equiv.LG22 ～ 312 ～ 313 ～ 43 ～ 46 ～ 86 ～ 8

-

1 12 Days 10[Flange Type] Round Flanged10.4EN 1.3505 Equiv.402160 ～ 600380019EN 1.7242 Equiv.ET-100K2 ～ 312 ～ 313 ～ 43 ～ 46 ～ 86 ～ 8

-

1 10 Days 10[Flange Type] Round Flanged13.4EN 1.3505 Equiv.442460 ～ 600460028EN 1.7242 Equiv.Standard (S2)2 ～ 502 ～ 503 ～ 63 ～ 66 ～ 106 ～ 10

-

1 12 Days 10[Flange Type] Round Flanged13.4EN 1.3505 Equiv.442460 ～ 600460028EN 1.7242 Equiv.LG22 ～ 502 ～ 503 ～ 63 ～ 66 ～ 106 ～ 10

-

1 12 Days 10[Flange Type] Round Flanged13.4EN 1.3505 Equiv.442460 ～ 600460028EN 1.7242 Equiv.ET-100K2 ～ 502 ～ 503 ～ 63 ～ 66 ～ 106 ～ 10

-

1 10 Days 10[Flange Type] Round Flanged16.6EN 1.3505 Equiv.503170 ～ 600620051EN 1.7242 Equiv.Standard (S2)2 ～ 652 ～ 653 ～ 103 ～ 106 ～ 136 ～ 13

-

1 12 Days 10[Flange Type] Round Flanged16.6EN 1.3505 Equiv.503170 ～ 600620051EN 1.7242 Equiv.LG22 ～ 652 ～ 653 ～ 103 ～ 106 ～ 136 ～ 13

-

1 12 Days 10[Flange Type] Round Flanged16.6EN 1.3505 Equiv.503170 ～ 600620051EN 1.7242 Equiv.ET-100K2 ～ 652 ～ 653 ～ 103 ～ 106 ～ 136 ～ 13

-

1 10 Days 10[Flange Type] Round Flanged20.6EN 1.3505 Equiv.633580 ～ 700850085EN 1.7242 Equiv.Standard (S2)2 ～ 802 ～ 804 ～ 124 ～ 128 ～ 168 ～ 16

-

1 12 Days 10[Flange Type] Round Flanged20.6EN 1.3505 Equiv.633580 ～ 700850085EN 1.7242 Equiv.LG22 ～ 802 ～ 804 ～ 124 ～ 128 ～ 168 ～ 16

-

1 12 Days 10[Flange Type] Round Flanged20.6EN 1.3505 Equiv.633580 ～ 700850085EN 1.7242 Equiv.ET-100K2 ～ 802 ～ 804 ～ 124 ～ 128 ～ 168 ～ 16

-

1 10 Days 10[Flange Type] Round Flanged25.8EN 1.3505 Equiv.714290 ～ 90015400193EN 1.7242 Equiv.Standard (S2)2 ～ 1002 ～ 1004 ～ 164 ～ 168 ～ 208 ～ 20

-

1 12 Days 10[Flange Type] Round Flanged25.8EN 1.3505 Equiv.714290 ～ 90015400193EN 1.7242 Equiv.LG22 ～ 1002 ～ 1004 ～ 164 ～ 168 ～ 208 ～ 20

-

1 12 Days 10[Flange Type] Round Flanged25.8EN 1.3505 Equiv.714290 ～ 90015400193EN 1.7242 Equiv.ET-100K2 ～ 1002 ～ 1004 ～ 164 ～ 168 ～ 208 ～ 20

-

1 10 Days 10[Flange Type] Round Flanged30.8EN 1.3505 Equiv.8047100 ～ 115018500272EN 1.7242 Equiv.Standard (S2)2 ～ 1252 ～ 1254 ～ 204 ～ 2010 ～ 2510 ～ 25

-

1 12 Days 10[Flange Type] Round Flanged30.8EN 1.3505 Equiv.8047100 ～ 115018500272EN 1.7242 Equiv.LG22 ～ 1252 ～ 1254 ～ 204 ～ 2010 ～ 2510 ～ 25

-

1 12 Days 10[Flange Type] Round Flanged30.8EN 1.3505 Equiv.8047100 ～ 115018500272EN 1.7242 Equiv.ET-100K2 ～ 1252 ～ 1254 ～ 204 ～ 2010 ～ 2510 ～ 25

-

1 9 Days 10[Flange Type] Round Flanged8EN 1.4125 Equiv.251660 ～ 19012004.8EN 1.4125 Equiv.Standard (S2)2 ～ 302 ～ 303366

-

1 11 Days 10[Flange Type] Round Flanged8EN 1.4125 Equiv.251660 ～ 19012004.8EN 1.4125 Equiv.LG22 ～ 302 ～ 303366

-

1 11 Days 10[Flange Type] Round Flanged8EN 1.4125 Equiv.251660 ～ 19012004.8EN 1.4125 Equiv.ET-100K2 ～ 302 ～ 303366

-

1 9 Days 10[Flange Type] Round Flanged10.4EN 1.4125 Equiv.332160 ～ 390240011EN 1.4125 Equiv.Standard (S2)2 ～ 402 ～ 403 ～ 43 ～ 46 ～ 86 ～ 8

-

1 11 Days 10[Flange Type] Round Flanged10.4EN 1.4125 Equiv.332160 ～ 390240011EN 1.4125 Equiv.LG22 ～ 312 ～ 313 ～ 43 ～ 46 ～ 86 ～ 8

-

1 11 Days 10[Flange Type] Round Flanged10.4EN 1.4125 Equiv.332160 ～ 390240011EN 1.4125 Equiv.ET-100K2 ～ 312 ～ 313 ～ 43 ～ 46 ～ 86 ～ 8

-

1 9 Days 10[Flange Type] Round Flanged13.4EN 1.4125 Equiv.362460 ～ 390330020EN 1.4125 Equiv.Standard (S2)2 ～ 512 ～ 503 ～ 63 ～ 66 ～ 106 ～ 10

-

1 11 Days 10[Flange Type] Round Flanged13.4EN 1.4125 Equiv.362460 ～ 390330020EN 1.4125 Equiv.LG22 ～ 502 ～ 503 ～ 63 ～ 66 ～ 106 ～ 10

-

1 11 Days 10[Flange Type] Round Flanged13.4EN 1.4125 Equiv.362460 ～ 390330020EN 1.4125 Equiv.ET-100K2 ～ 502 ～ 503 ～ 63 ～ 66 ～ 106 ～ 10

-

1 9 Days 10[Flange Type] Round Flanged16.6EN 1.4125 Equiv.503170 ～ 390620051EN 1.4125 Equiv.Standard (S2)2 ～ 652 ～ 653 ～ 103 ～ 106 ～ 136 ～ 13

-

1 11 Days 10[Flange Type] Round Flanged16.6EN 1.4125 Equiv.503170 ～ 390620051EN 1.4125 Equiv.LG22 ～ 652 ～ 653 ～ 103 ～ 106 ～ 136 ～ 13

-

1 11 Days 10[Flange Type] Round Flanged16.6EN 1.4125 Equiv.503170 ～ 390620051EN 1.4125 Equiv.ET-100K2 ～ 652 ～ 653 ～ 103 ～ 106 ～ 136 ～ 13

-

1 10 Days 10[Flange Type] Compact Flanged8EN 1.3505 Equiv.251660 ～ 40012004.8EN 1.7242 Equiv.Standard (S2)2 ～ 302 ～ 303366

-

1 12 Days 10[Flange Type] Compact Flanged8EN 1.3505 Equiv.251660 ～ 40012004.8EN 1.7242 Equiv.LG22 ～ 302 ～ 303366

-

1 12 Days 10[Flange Type] Compact Flanged8EN 1.3505 Equiv.251660 ～ 40012004.8EN 1.7242 Equiv.ET-100K2 ～ 302 ～ 303366

-

1 10 Days 10[Flange Type] Compact Flanged10.4EN 1.3505 Equiv.402160 ～ 600380019EN 1.7242 Equiv.Standard (S2)2 ～ 402 ～ 403 ～ 43 ～ 46 ～ 86 ～ 8

-

1 12 Days 10[Flange Type] Compact Flanged10.4EN 1.3505 Equiv.402160 ～ 600380019EN 1.7242 Equiv.LG22 ～ 312 ～ 313 ～ 43 ～ 46 ～ 86 ～ 8

-

1 12 Days 10[Flange Type] Compact Flanged10.4EN 1.3505 Equiv.402160 ～ 600380019EN 1.7242 Equiv.ET-100K2 ～ 312 ～ 313 ～ 43 ～ 46 ～ 86 ～ 8

-

1 10 Days 10Straight8EN 1.3505 Equiv.251660 ～ 40012004.8EN 1.7242 Equiv.Standard (S2)2 ～ 302 ～ 303366

-

1 12 Days 10Straight8EN 1.3505 Equiv.251660 ～ 40012004.8EN 1.7242 Equiv.LG22 ～ 302 ～ 303366

-

1 12 Days 10Straight8EN 1.3505 Equiv.251660 ～ 40012004.8EN 1.7242 Equiv.ET-100K2 ～ 302 ～ 303366

-

1 10 Days 10Straight10.4EN 1.3505 Equiv.402160 ～ 600380019EN 1.7242 Equiv.Standard (S2)2 ～ 402 ～ 403 ～ 43 ～ 46 ～ 86 ～ 8

-

1 12 Days 10Straight10.4EN 1.3505 Equiv.402160 ～ 600380019EN 1.7242 Equiv.LG22 ～ 312 ～ 313 ～ 43 ～ 46 ～ 86 ～ 8

-

1 12 Days 10Straight10.4EN 1.3505 Equiv.402160 ～ 600380019EN 1.7242 Equiv.ET-100K2 ～ 312 ～ 313 ～ 43 ～ 46 ～ 86 ～ 8

-

1 10 Days 10Straight13.4EN 1.3505 Equiv.442460 ～ 600460028EN 1.7242 Equiv.Standard (S2)2 ～ 502 ～ 503 ～ 63 ～ 66 ～ 106 ～ 10

-

1 12 Days 10Straight13.4EN 1.3505 Equiv.442460 ～ 600460028EN 1.7242 Equiv.LG22 ～ 502 ～ 503 ～ 63 ～ 66 ～ 106 ～ 10

-

1 12 Days 10Straight13.4EN 1.3505 Equiv.442460 ～ 600460028EN 1.7242 Equiv.ET-100K2 ～ 502 ～ 503 ～ 63 ～ 66 ～ 106 ～ 10

-

1 10 Days 10Straight16.6EN 1.3505 Equiv.503170 ～ 600620051EN 1.7242 Equiv.Standard (S2)2 ～ 652 ～ 653 ～ 103 ～ 106 ～ 136 ～ 13

-

1 12 Days 10Straight16.6EN 1.3505 Equiv.503170 ～ 600620051EN 1.7242 Equiv.LG22 ～ 652 ～ 653 ～ 103 ～ 106 ～ 136 ～ 13

-

1 12 Days 10Straight16.6EN 1.3505 Equiv.503170 ～ 600620051EN 1.7242 Equiv.ET-100K2 ～ 652 ～ 653 ～ 103 ～ 106 ～ 136 ～ 13

-

1 10 Days 10Straight20.6EN 1.3505 Equiv.633580 ～ 700850085EN 1.7242 Equiv.Standard (S2)2 ～ 802 ～ 804 ～ 124 ～ 128 ～ 168 ～ 16

-

1 12 Days 10Straight20.6EN 1.3505 Equiv.633580 ～ 700850085EN 1.7242 Equiv.LG22 ～ 802 ～ 804 ～ 124 ～ 128 ～ 168 ～ 16

-

1 12 Days 10Straight20.6EN 1.3505 Equiv.633580 ～ 700850085EN 1.7242 Equiv.ET-100K2 ～ 802 ～ 804 ～ 124 ～ 128 ～ 168 ～ 16

-

1 10 Days 10Straight25.8EN 1.3505 Equiv.714290 ～ 90015400193EN 1.7242 Equiv.Standard (S2)2 ～ 1002 ～ 1004 ～ 164 ～ 168 ～ 208 ～ 20

-

1 12 Days 10Straight25.8EN 1.3505 Equiv.714290 ～ 90015400193EN 1.7242 Equiv.LG22 ～ 1002 ～ 1004 ～ 164 ～ 168 ～ 208 ～ 20

-

1 12 Days 10Straight25.8EN 1.3505 Equiv.714290 ～ 90015400193EN 1.7242 Equiv.ET-100K2 ～ 1002 ～ 1004 ～ 164 ～ 168 ～ 208 ～ 20

-

1 10 Days 10Straight30.8EN 1.3505 Equiv.8047100 ～ 115018500272EN 1.7242 Equiv.Standard (S2)2 ～ 1252 ～ 1254 ～ 204 ～ 2010 ～ 2510 ～ 25

-

1 12 Days 10Straight30.8EN 1.3505 Equiv.8047100 ～ 115018500272EN 1.7242 Equiv.LG22 ～ 1252 ～ 1254 ～ 204 ～ 2010 ～ 2510 ～ 25

-

1 12 Days 10Straight30.8EN 1.3505 Equiv.8047100 ～ 115018500272EN 1.7242 Equiv.ET-100K2 ～ 1252 ～ 1254 ～ 204 ～ 2010 ～ 2510 ～ 25

Loading...

  1. 1
  2. 2
  3. Next >>

Specifications/Overview

 
Precautions for Ball Spline Assembly
■Check Assembly Position
  Match Mark Numbers are entered on nuts and spline shafts (see the diagram on the right).
  When re-assembling, confirm the match mark numbers, character orientations, and positional relationship of parts.
  If the alignment marks are not aligned correctly, the function will be affected.
■Tolerance for Mating Bores
  H7 tolerance is recommended for mating bores for the spline nuts when mounting them on housings.
■For Customers machining the shaft ends
  In order to facilitate nut insertions, chamfer the machined shaft ends,
and remove burrs on the edges of the spline groove with a round file.
 

Basic information

Shaft end shape (left) Stepped and Tapped Shaft end shape (right) Stepped and Tapped Type Solid
Torque Middle Torque Number of nuts(pcs.) 1 Nut length Standard
Preload Standard Accuracy Grade Standard Grade The circulation type of balls 1-fach

Configure

Clear all

72Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Nut type

    • Straight
    • Flange Type
      • Compact Flanged
      • Round Flanged

    Clear

  • Shaft O.D. D(φ)

    • 8
    • 10.4
    • 13.4
    • 16.6
    • 20.6
    • 25.8
    • 30.8

    Clear

  • Shaft material

    • EN 1.3505 Equiv.
    • EN 1.4125 Equiv.

    Clear

  • Nut Overall Length(mm)

    • 25
    • 33
    • 36
    • 40
    • 44
    • 50
    • 63
    • 71
    • 80

    Clear

  • Nut O.D.(φ)

    • 16
    • 21
    • 24
    • 31
    • 35
    • 42
    • 47

    Clear

  • Shaft Overall Length L(mm)

     [60-1150/1mm Unit(s)]

    Clear

  • Nut Material

    • EN 1.4125 Equiv.
    • EN 1.7242 Equiv.

    Clear

  • Grease

    • ET-100K
    • LG2
    • Standard (S2)

    Clear

  • E(mm)

     [2-125/1mm Unit(s)]

    Clear

  • F(mm)

     [2-125/1mm Unit(s)]

    Clear

  • M(mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20

    Clear

  • N(mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20

    Clear

  • P(mm)

    • 6
    • 8
    • 10
    • 12
    • 13
    • 15
    • 16
    • 20
    • 25

    Clear

  • Q(mm)

    • 6
    • 8
    • 10
    • 12
    • 13
    • 15
    • 16
    • 20
    • 25

    Clear

  • Type

    • BSLM
    • BSLMS
    • BSLN
    • BSLS
    • BSLSS

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less
    • 10 Days or Less
    • 11 Days or Less
    • 12 Days or Less

    Reset

Optional Attributes

Complementary Products

MISUMI Unit еxample related to this product

Search for оther еxamples

back next

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.