UNI Hose Cable Gland, PC, Short Connection Thread
UNI hose cable gland, made of PC plastic, with hose connector, flexible sealing inserts for gentle cable seal over a large surface, above-average strain relief, good mechanical and thermal properties, high corrosion, chemical, wear and vibration resistance, high UV stability, type of protection IP68 up to 10 bar.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
23254SPC21.16
Basic information
| Material | Other | Color | Grey | Model | Straight |
|---|---|---|---|---|---|
| EMC-version | No | Bend Radius Protection/Trumpet Flare | No | Explosion-tested Version | No |
| Flat Cable Coupling | No | For Armoured Cable | No | For Ex-zone Dust | None |
| For Ex-zone Gas | None | Glass-fibre Reinforced | No | Degree of Protection (IP) | IP68 |
| Halogen Free | Yes | Hexagon Angular Dimension(mm) | 39.5 | Material Quality | Polycarbonate (PC) |
| Nominal Thread Size Metric/PG | 32 | Operating Temperature Min./Max.(°C) | -20 to 100 | Pitch Thread | 1.5 |
| Screened | No | Thread Type | Metric | Thread Length(mm) | 11 |
| With Locknut | No | Separable Screw Gland | No | Suitable for Cable Diameter (Min-Max)(mm) | 11.5 to 15.5 |
| Wrench Width(mm) | 36 |
This page is UNI Hose Cable Gland, PC, Short Connection Thread, part number 23254SPC21.16.
You can find the detail information about specifications and dimensions on part number 23254SPC21.16.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.