Ball Indenter for Test, Steel Ball (Part Numbers)
Mitutoyo indenters for Rockwell hardness test. As the interface between machine and material, the indenter must be of immaculate quality. Therefore Mitutoyo only uses diamond indenters from the most experienced suppliers.
The indenters are calibrated in the highest standard calibration laboratories in the DAkkS accreditation body, accredited according to ISO 17025 and traceable to the PTB. Constant development at our calibration partners secures an unmatched quality level.
Rockwell diamond indenter feature DAkkS calibration certificates according to DIN EN ISO 6508-2 and/or ASTM E18. A function test, verifying the applicability of the indenter in regard of various indentation depth levels under different test forces, is optionally available.
Ball holders are made by Mitutoyo, and are supplied without calibration certificate for the included ball.
Rockwell ball indenter steel ball for Rockwell plastic test according to ISO 2039-2. Calibration certificate not included.
Product Line: HR-100, HR-200, HR-300, HR-400, HR-500, HR-600, AR-10, AR-2, ARK
The indenters are calibrated in the highest standard calibration laboratories in the DAkkS accreditation body, accredited according to ISO 17025 and traceable to the PTB. Constant development at our calibration partners secures an unmatched quality level.
Rockwell diamond indenter feature DAkkS calibration certificates according to DIN EN ISO 6508-2 and/or ASTM E18. A function test, verifying the applicability of the indenter in regard of various indentation depth levels under different test forces, is optionally available.
Ball holders are made by Mitutoyo, and are supplied without calibration certificate for the included ball.
Rockwell ball indenter steel ball for Rockwell plastic test according to ISO 2039-2. Calibration certificate not included.
Product Line: HR-100, HR-200, HR-300, HR-400, HR-500, HR-600, AR-10, AR-2, ARK
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Basic information
| Product Type | Hardness Check | Calibration | without | Chamfer Angle(degree) | 20 |
|---|---|---|---|---|---|
| Material | steel | Method | Rockwell | Shaft Length(mm) | 12 |
| Shaft Diameter(mm) | 6.3 | Total Length(mm) | 28 | Type | Ball indenter |
| Usable Length(mm) | 16 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.