Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Square End Mills (HSS)（Page 2）

231

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 13 Days or Less

?* Information on days to ship and prices

High-Speed Steel Corner C End Mill, 4-Flute / Short Model

MISUMI

[Features]
-High-speed steel 4-flute corner chamfer cutter with selectable corner chamfer in 0.1 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Non-Coated
4 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Corner C End Mill, 4-Flute / Regular Model

MISUMI

Non-Coated
4 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Blade Relief End Mill, 2-Flute / Short Model

MISUMI

[Features]
-High speed steel cutter with 2 flanks, which can be sized to customer requirements to avoid unwanted tool overlap.

Non-Coated
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Blade Relief End Mill, 2-Flute / Regular Model

MISUMI

[Features]
-High speed steel reamer with 2 flats that can be made to measure to avoid unwanted tool interference

Non-Coated
2 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Blade Relief End Mill, 4-Flute / Short Model

MISUMI

[Features]
-High-speed steel end mill with 4 flanks that can be sized to customer specifications to avoid unwanted tooling interference

Non-Coated
4 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Blade Relief End Mill, 4-Flute / Regular Model

MISUMI

[Features]
-High speed steel cutter with 4 flanks that can be sized to customer requirements to avoid unwanted tooling interference.

Non-Coated
4 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular

MISUMI

[Features]
-High-speed steel square cutter with 2 cutting edges and regular cutting edge length, where the cutting diameter can be specified in 0.01 mm steps
-Can be reground. Please refer to the "Regrinding service" page for information on application procedures, range of services, prices, etc.

Non-Coated
2 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

AG Mill, 2-Flute 2AGE

NACHI(FUJIKOSHI)

Performs high-speed, high-efficiency machining of workpiece materials from carbon steel and stainless steel to aluminum.

Select to compare

Configure now
Starting from^∗ ：	48.85 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

G Standard End Mill, 4-Flute 4GE

NACHI(FUJIKOSHI)

General-purpose coated end-mill that performs machining of workpiece materials from carbon steel and stainless steel to aluminum. Suitable for side surface processing.

Select to compare

Configure now
Starting from^∗ ：	44.13 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

G Long End Mill, 2-Flute SL2GE

NACHI(FUJIKOSHI)

Performs machining of workpiece materials from carbon steel and stainless steel to aluminum. Suitable for deep grooving and grooving at depth.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	48.38 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SG-FAX End Mill, 2-Flute 2SGE

NACHI(FUJIKOSHI)

Performs high-speed, high-efficiency machining of workpiece materials from carbon steel and stainless steel to aluminum.

Select to compare

Configure now
Starting from^∗ ：	116.14 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Super Hard, 2-Flute 2SE

NACHI(FUJIKOSHI)

General-purpose end-mill that performs machining of workpiece materials from carbon steel and stainless steel to aluminum.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	30.16 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Super Hard, 4-Flute 4SE

NACHI(FUJIKOSHI)

General-purpose end-mill that performs machining of workpiece materials from carbon steel and stainless steel to aluminum. Suitable for side surface processing.

Select to compare

Configure now
Starting from^∗ ：	34.48 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

AG Mill, 4-Flute 4AGE

NACHI(FUJIKOSHI)

Performs high-speed, high-efficiency machining of workpiece materials from carbon steel and stainless steel to aluminum. Suitable for side surface processing.

Select to compare

Configure now
Starting from^∗ ：	44.74 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SG-FAX Medium End Mill, 2-Flute 2MSGE

NACHI(FUJIKOSHI)

[Features]
A medium-sized end mill with 2 cutting edges.
It is suitable for high-speed milling of general steel, stainless steel and aluminium.
[Features]
Suitable for end milling of general steel, stainless steel, aluminium, etc.

Select to compare

Configure now
Starting from^∗ ：	67.29 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

NATAC, 2-Flute 2NAC

NACHI(FUJIKOSHI)

Select to compare

Configure now
Starting from^∗ ：	40.85 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

AG Mill, 2-Flute Mill, Medium 2AGEM

NACHI(FUJIKOSHI)

Performs high-speed, high-efficiency machining of workpiece materials from carbon steel and stainless steel to aluminum.

Select to compare

Configure now
Starting from^∗ ：	51.84 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

AG Mill, 4-Flute, Long 4AGEL

NACHI(FUJIKOSHI)

Suitable for wide side surfaces and side milling at depth.

Select to compare

Configure now
Starting from^∗ ：	111.61 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

G Standard End Mill, 2-Flute 2GE

NACHI(FUJIKOSHI)

General-purpose coated end-mill that performs machining of workpiece materials from carbon steel and stainless steel to aluminum.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	39.04 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

G Standard End Mill, 3-Flute 3GE

NACHI(FUJIKOSHI)

General-purpose coating end-mill.

Select to compare

Configure now
Starting from^∗ ：	44.69 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

G Long End Mill, 4-Flute SL4GE

NACHI(FUJIKOSHI)

General-purpose coating end-mill. Suitable for wide side surfaces and side milling at depth.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	69.45 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

For 2-Flute Key Groove EKD (OH1)

OSG

2 flute general purpose cutters with a cutting edge diameter tolerance of 0 to +0.02.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.96 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For 2-Flute Key Groove EX-TIN-EKD (OH1)

OSG

TiN coated 2 flute cutter with a cutting edge diameter tolerance of 0 to +0.02.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.13 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

2-Flute General Use, Short EDS

OSG

High speed steel square series.
Tool material: Cobalt high speed steel, Working material: General steel/stainless steel/cast iron/aluminium/copper
Coating: Uncoated, Standard/Alteration category: Manufacturer's standard product, Number of flutes (pcs.): 2
Zerration angle: Standard helix (30 to 44°).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.46 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

2-Flute Short EX-TIN-EDS

OSG

TiN coated 2 flute general purpose cutter in short design.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.13 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute General Use, Medium

OSG

Universal 2-flute cutter in medium design with cobalt high-speed steel as base material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.24 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Medium, EX-TIN-EDN

OSG

TiN-coated all-purpose end mill with 2 cutting edges and medium shape.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	26.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Long, EX-TIN-EDL

OSG

TiN-coated all-purpose end mill with 2 cutting edges in long version. Suitable for deep cuts.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	27.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Multi-Flute Center Cut Short CC-EMS

OSG

Cobalt high speed steel centre cut.
Tool material: Cobalt high speed steel, Working material: General steel/stainless steel/cast iron/aluminium/copper
Coating: Uncoated, Standard/ageing category: Manufacturer's standard product, Number of flutes (pcs.): 4
Skew angle: standard spiral (30 to 44°).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.82 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

End Mill (Multi-Flute Center-Cutting Long Type), CC-EML

OSG

4-cutter end mill with centre cut in long design using cobalt high-speed steel as base material. Suitable for deep cuts.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.92 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

End Mill (Multi-Flute Long-Shank Short Type), LS-EMS

OSG

General purpose cutter with 4 cutting edges and long shank in short design made of cobalt high speed steel as basic material. It can be used for machining long projections.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	30.84 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

End Mill (Multi-Flute Long-Shank Long Type), LS-EML

OSG

General purpose 4 flute cutter with long shank made of cobalt high speed steel as base material. Suitable for deep cuts.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	32.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

4-Flute, Long, EX-TIN-EML

OSG

TIN coating, helix angle 30°, cobalt high speed steel square end-mill.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	30.14 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CPM End Mill (Medium for 2-Flute, Straight Blade Shape) CPM-STDN

OSG

2-flute straight flute end mill, medium type for moulding using powder metal high speed steel CPM as base material. It can be formed into the shape required for use.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

V Coated XPM End Mill (2 Flutes, for Key Grooves), V-XPM-EKD (OH1)

OSG

V coating applied powder high speed XPM key groove processing end-mill

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	38.05 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

V Coated XPM End Mill (2-Flute Short Type), V-XPM-EDS

OSG

V coating has been applied to high-speed steel powder XPM. Base Material Adopted Powdered High Speed Steel XPM 2-Flute Short Series

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	30.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

XPM End Mill, (2-Flute Short Type), XPM-EDS

OSG

2 flute short cutter with powder metal high speed steel XPM as base material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	22.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

V Coated XPM Slim Shank End Mill (2-Flute Medium Type), V-SS-XPM-EDN

OSG

Shank diameters are 1 mm smaller than blade diameter. Can freely adjust the extension and length.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	35.85 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

V Coated XPM End Mill (2-Flute Medium Type), V-XPM-EDN

OSG

V coating has been applied to high-speed steel powder XPM. Base Material Adopted Powdered High Speed Steel XPM 2-Flute Short Series

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	30.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

XPM End Mill (2-Flute Medium Type), XPM-EDN

OSG

Medium 2 flute cutter with powder metal high speed steel XPM as base material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.13 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

V Coated XPM End Mill (2-Flute Long Type), V-XPM-EDL

OSG

V coating has been applied to high-speed steel powder XPM. Base Material Adopted Powdered High Speed Steel XPM 2-Flute Short Series

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	37.05 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

XPM End Mill (2-Flute, Long) XPM-EDL

OSG

2 flute cutter in long version with powder metal high speed steel XPM as basic material. Suitable for deep cuts.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	28.04 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

XPM End Mill (2-Flute Deep-Carving Medium Type), DE-XPM-EDN

OSG

Long shank form end mill with 2 blades for deep engraving. Set with a shank radius thinner than the blade bore.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	31.88 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

V Coated XPM End Mill (4-Flute Short Type), V-XPM-EMS

OSG

V coating has been applied to high-speed steel powder XPM. Base Material Adopted Powdered High Speed Steel XPM 2-Flute Short Series

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	33.24 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

V Coated XPM Slim Shank End Mill (4 Flutes, Short), V-SS-XPM-EMS

OSG

Shank diameters are 1 mm smaller than blade diameter. Can freely adjust the extension and length.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	39.45 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
work material
Blade shape type
Number of flutes(sheet)
Tool Material Type
Machining Application
Shank diameter (d)(mm)
Coating
Overall Length (L)(mm)
Torsion Angle (θ)
Base Blade Y/N
Underneck length (ℓ1)(mm)
shank

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	High-Speed Steel Corner C End Mill, 4-Flute / Short Model	High-Speed Steel Corner C End Mill, 4-Flute / Regular Model	High-Speed Steel Blade Relief End Mill, 2-Flute / Short Model	High-Speed Steel Blade Relief End Mill, 2-Flute / Regular Model	High-Speed Steel Blade Relief End Mill, 4-Flute / Short Model	High-Speed Steel Blade Relief End Mill, 4-Flute / Regular Model	High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular	AG Mill, 2-Flute 2AGE	G Standard End Mill, 4-Flute 4GE	G Long End Mill, 2-Flute SL2GE	SG-FAX End Mill, 2-Flute 2SGE	Super Hard, 2-Flute 2SE	Super Hard, 4-Flute 4SE	AG Mill, 4-Flute 4AGE	SG-FAX Medium End Mill, 2-Flute 2MSGE	NATAC, 2-Flute 2NAC	AG Mill, 2-Flute Mill, Medium 2AGEM	AG Mill, 4-Flute, Long 4AGEL	G Standard End Mill, 2-Flute 2GE	G Standard End Mill, 3-Flute 3GE	G Long End Mill, 4-Flute SL4GE	For 2-Flute Key Groove EKD (OH1)	For 2-Flute Key Groove EX-TIN-EKD (OH1)	2-Flute General Use, Short EDS	2-Flute Short EX-TIN-EDS	2-Flute General Use, Medium	2-Flute, Medium, EX-TIN-EDN	2-Flute, Long, EX-TIN-EDL	Multi-Flute Center Cut Short CC-EMS	End Mill (Multi-Flute Center-Cutting Long Type), CC-EML	End Mill (Multi-Flute Long-Shank Short Type), LS-EMS	End Mill (Multi-Flute Long-Shank Long Type), LS-EML	4-Flute, Long, EX-TIN-EML	CPM End Mill (Medium for 2-Flute, Straight Blade Shape) CPM-STDN	V Coated XPM End Mill (2 Flutes, for Key Grooves), V-XPM-EKD (OH1)	V Coated XPM End Mill (2-Flute Short Type), V-XPM-EDS	XPM End Mill, (2-Flute Short Type), XPM-EDS	V Coated XPM Slim Shank End Mill (2-Flute Medium Type), V-SS-XPM-EDN	V Coated XPM End Mill (2-Flute Medium Type), V-XPM-EDN	XPM End Mill (2-Flute Medium Type), XPM-EDN	V Coated XPM End Mill (2-Flute Long Type), V-XPM-EDL	XPM End Mill (2-Flute, Long) XPM-EDL	XPM End Mill (2-Flute Deep-Carving Medium Type), DE-XPM-EDN	V Coated XPM End Mill (4-Flute Short Type), V-XPM-EMS	V Coated XPM Slim Shank End Mill (4 Flutes, Short), V-SS-XPM-EMS
Starting from^∗	-	-	-	-	-	-	-	48.85 € *Unit price with basic configuration	44.13 € *Unit price with basic configuration	48.38 € *Unit price with basic configuration	116.14 € *Unit price with basic configuration	30.16 € *Unit price with basic configuration	34.48 € *Unit price with basic configuration	44.74 € *Unit price with basic configuration	67.29 € *Unit price with basic configuration	40.85 € *Unit price with basic configuration	51.84 € *Unit price with basic configuration	111.61 € *Unit price with basic configuration	39.04 € *Unit price with basic configuration	44.69 € *Unit price with basic configuration	69.45 € *Unit price with basic configuration	16.96 € *Unit price with basic configuration Volume Discount	21.13 € *Unit price with basic configuration Volume Discount	15.46 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	21.13 € *Unit price with basic configuration Volume Discount	16.24 € *Unit price with basic configuration Volume Discount	26.83 € *Unit price with basic configuration Volume Discount	27.73 € *Unit price with basic configuration Volume Discount	16.82 € *Unit price with basic configuration Volume Discount	19.92 € *Unit price with basic configuration Volume Discount	30.84 € *Unit price with basic configuration Volume Discount	32.54 € *Unit price with basic configuration Volume Discount	30.14 € *Unit price with basic configuration Volume Discount	24.83 € *Unit price with basic configuration Volume Discount	38.05 € *Unit price with basic configuration Volume Discount	30.34 € *Unit price with basic configuration Volume Discount	22.83 € *Unit price with basic configuration Volume Discount	35.85 € *Unit price with basic configuration Volume Discount	30.34 € *Unit price with basic configuration Volume Discount	24.13 € *Unit price with basic configuration Volume Discount	37.05 € *Unit price with basic configuration Volume Discount	28.04 € *Unit price with basic configuration Volume Discount	31.88 € *Unit price with basic configuration Volume Discount	33.24 € *Unit price with basic configuration Volume Discount	39.45 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	10 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days
Specifications	Non-Coated 4 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)	Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes R (Regular)	Non-Coated 4 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)	Non-Coated 2 Flutes R (Regular)
Blade diameter (D)(φ)	3 ～ 25	3 ～ 25	8 ～ 25	8 ～ 25	8 ～ 25	8 ～ 25	2.7 ～ 24.99	3.5 ～ 50	4 ～ 50	4 ～ 25	1.5 ～ 21	2.5 ～ 50	4.5 ～ 50	4.5 ～ 50	3	3.3 ～ 11.3	8.5 ～ 10	14 ～ 20	1.3 ～ 50	3 ～ 40	7	3 ～ 25	3 ～ 25	0.45 ～ 60	0.8 ～ 50	1 ～ 20	1 ～ 20	1 ～ 40	2.5 ～ 40	3 ～ 40	10 ～ 50	10 ～ 40	3 ～ 40	1.5 ～ 20	3 ～ 12	1 ～ 40	0.8 ～ 40	6 ～ 25	1 ～ 20	1 ～ 20	3 ～ 30	3 ～ 40	8 ～ 50	2.5 ～ 40	6 ～ 25
Blade length (ℓ)(mm)	8 ～ 45	12 ～ 68	-	-	-	-	10 ～ 60	8 ～ 70	12 ～ 70	20 ～ 90	3 ～ 45	7 ～ 70	15 ～ 70	15 ～ 70	9	7 ～ 22	25	55 ～ 75	3 ～ 70	6 ～ 65	35	5 ～ 25	5 ～ 25	1.1 ～ 80	1.6 ～ 75	3.5 ～ 45	3.5 ～ 45	6 ～ 110	10 ～ 65	15 ～ 110	25 ～ 75	45 ～ 110	15 ～ 110	5 ～ 45	5 ～ 15	2.5 ～ 65	2 ～ 65	15 ～ 50	3.5 ～ 45	3.5 ～ 45	15 ～ 90	15 ～ 110	20 ～ 75	10 ～ 65	15 ～ 50
work material	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]
Blade shape type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Number of flutes(sheet)	4	4	2	2	4	4	2	2	4	2	2	2	4	4	2	2	2	4	2	3	4	2	2	2	2	2	2	2	4	4	4	4	4	2	2	2	2	2	2	2	2	2	2	4	4
Tool Material Type	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Alloy HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Alloy HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel
Machining Application	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts
Shank diameter (d)(mm)	6 ～ 25	6 ～ 25	10 ～ 25	10 ～ 25	10 ～ 25	10 ～ 25	6 ～ 25	8 ～ 32	8 ～ 42	8 ～ 25	6 ～ 20	6 ～ 42	8 ～ 42	8 ～ 32	6	6 ～ 12	10	16 ～ 20	6 ～ 42	6 ～ 32	10	6 ～ 25	6 ～ 25	6 ～ 42	6 ～ 42	6 ～ 20	6 ～ 20	6 ～ 32	6 ～ 32	6 ～ 32	10 ～ 42	10 ～ 32	6 ～ 32	6 ～ 20	6 ～ 12	6 ～ 32	6 ～ 32	5 ～ 24	6 ～ 20	6 ～ 20	6 ～ 25	6 ～ 32	6 ～ 42	6 ～ 32	5 ～ 24
Coating	TiCN / Non-Coated	TiCN / Non-Coated	TiCN / Non-Coated	TiCN / Non-Coated	TiCN / Non-Coated	TiCN / Non-Coated	TiCN / Non-Coated	AG	TiN	TiN	TiCN	Non-Coated	Non-Coated	AG	TiCN	Non-Coated	TiAlN	AG	TiN	TiN	TiN	Non-Coated	TiN	Non-Coated	TiN	Non-Coated	TiN	TiN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiN	Non-Coated	-	-	Non-Coated	-	-	Non-Coated	-	Non-Coated	Non-Coated	-	-
Overall Length (L)(mm)	52 ～ 121	55 ～ 144	60 ～ 120	60 ～ 130	69 ～ 121	78 ～ 144	50 ～ 130	60 ～ 155	60 ～ 160	60 ～ 160	50 ～ 125	50 ～ 160	60 ～ 160	60 ～ 155	50	50 ～ 80	75	110 ～ 140	50 ～ 160	50 ～ 150	80	50 ～ 95	50 ～ 95	45 ～ 170	45 ～ 165	45 ～ 110	45 ～ 110	50 ～ 195	50 ～ 150	60 ～ 195	125 ～ 340	125 ～ 285	60 ～ 195	45 ～ 110	50 ～ 70	50 ～ 165	50 ～ 165	85 ～ 160	55 ～ 125	55 ～ 125	65 ～ 180	65 ～ 210	80 ～ 350	55 ～ 165	85 ～ 160
Torsion Angle (θ)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Weak torsion (15˚ to 25˚)	Weak torsion (15˚ to 25˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	No torsion	Weak torsion (15˚ to 25˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)
Base Blade Y/N	Available	Available	Available	Available	Available	Available	Available	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight

Filter by:

Stock

- Show only stock items
Clear

Blade diameter (D)(φ)
- 0.45～0.95
  - 0.45
  - 0.8
  - 0.9
  - 0.95
- 1～1.9
  - 1
  - 1/2
  - 1.05
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.59
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.38
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.97
  - 3
  - 3/4
  - 3.1
  - 3.18
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
  - 3.97
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.76
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5/8
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.56
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.05
  - 6.1
  - 6.2
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.94
  - 7
  - 7/8
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
  - 7.94
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.53
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.11
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.29
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.7
  - 15.8
  - 15.88
  - 15.9
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.46
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.9
  - 19
  - 19.05
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.6
  - 19.7
  - 19.8
  - 19.9
- 20～20.9
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.64
  - 20.7
  - 20.8
  - 20.9
- 21～21.9
  - 21
  - 21.1
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.7
  - 21.8
  - 21.9
- 22～22.9
  - 22
  - 22.1
  - 22.2
  - 22.23
  - 22.3
  - 22.4
  - 22.5
  - 22.6
  - 22.7
  - 22.8
  - 22.9
- 23～23.9
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.7
  - 23.8
  - 23.81
  - 23.9
- 24～24.9
  - 24
  - 24.1
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.7
  - 24.8
  - 24.9
- 25～25.9
  - 25
  - 25.1
  - 25.2
  - 25.3
  - 25.4
  - 25.5
  - 25.6
  - 25.7
  - 25.8
  - 25.9
- 26～26.9
  - 26
  - 26.1
  - 26.2
  - 26.3
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
  - 26.9
- 27～27.9
  - 27
  - 27.1
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.7
  - 27.8
  - 27.9
- 28～28.9
  - 28
  - 28.1
  - 28.2
  - 28.3
  - 28.4
  - 28.5
  - 28.6
  - 28.7
  - 28.8
  - 28.9
- 29～29.9
  - 29
  - 29.1
  - 29.2
  - 29.3
  - 29.4
  - 29.5
  - 29.6
  - 29.7
  - 29.8
  - 29.9
- 30～30.9
  - 30
  - 30.1
  - 30.2
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.7
  - 30.8
  - 30.9
- 31～31.9
  - 31
  - 31.1
  - 31.2
  - 31.3
  - 31.4
  - 31.5
  - 31.6
  - 31.7
  - 31.75
  - 31.8
  - 31.9
- 32～32.9
  - 32
  - 32.1
  - 32.2
  - 32.3
  - 32.4
  - 32.5
  - 32.6
  - 32.7
  - 32.8
  - 32.9
- 33～33.9
  - 33
  - 33.1
  - 33.2
  - 33.3
  - 33.4
  - 33.5
  - 33.6
  - 33.7
  - 33.8
  - 33.9
- 34～34.9
  - 34
  - 34.1
  - 34.2
  - 34.3
  - 34.4
  - 34.5
  - 34.6
  - 34.7
  - 34.8
  - 34.9
- 35～35.9
  - 35
  - 35.1
  - 35.2
  - 35.3
  - 35.4
  - 35.5
  - 35.6
  - 35.7
  - 35.8
  - 35.9
- 36～36.9
  - 36
  - 36.1
  - 36.2
  - 36.3
  - 36.4
  - 36.5
  - 36.6
  - 36.7
  - 36.8
  - 36.9
- 37～37.9
  - 37
  - 37.1
  - 37.2
  - 37.3
  - 37.4
  - 37.5
  - 37.6
  - 37.7
  - 37.8
  - 37.9
- 38～38.9
  - 38
  - 38.1
  - 38.2
  - 38.3
  - 38.4
  - 38.5
  - 38.6
  - 38.7
  - 38.8
  - 38.9
- 39～39.9
  - 39
  - 39.1
  - 39.2
  - 39.3
  - 39.4
  - 39.5
  - 39.6
  - 39.7
  - 39.8
  - 39.9
- 40～40.9
  - 40
  - 40.1
  - 40.2
  - 40.3
  - 40.4
  - 40.5
  - 40.6
  - 40.7
  - 40.8
  - 40.9
- 41～41.9
  - 41
  - 41.1
  - 41.2
  - 41.3
  - 41.4
  - 41.5
  - 41.6
  - 41.7
  - 41.8
  - 41.9
- 42～42.9
  - 42
  - 42.1
  - 42.2
  - 42.3
  - 42.4
  - 42.5
  - 42.6
  - 42.7
  - 42.8
  - 42.9
- 43～43.9
  - 43
  - 43.1
  - 43.2
  - 43.3
  - 43.4
  - 43.5
  - 43.6
  - 43.7
  - 43.8
  - 43.9
- 44～44.9
  - 44
  - 44.1
  - 44.2
  - 44.3
  - 44.4
  - 44.5
  - 44.6
  - 44.7
  - 44.8
  - 44.9
- 45～45.5
  - 45
  - 45.5
- 46～46.5
  - 46
  - 46.5
- 47～47.5
  - 47
  - 47.5
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.8
  - 50
  - 50.5
  - 50.8
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 85
- 90
- 95
- 100
[2.7-3/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-16/0.01φ Unit(s)][17-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]

Drawing

Clear

Blade length (ℓ)(mm)
1.1

1.6

1.8

2

2.2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

7.5

8

9

10

10.5

11

12

13

14

15

16

17

18

19

20

22

23

25

26

27

28

30

32

33

34

35

38

39

40

45

48

50

53

55

56

58

60

63

65

68

70

75

80

85

90

95

100

105

110

115

120

125

150

160

180

200

250

300
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
- Other
- Other 2
- Other 3
- Other 4
Details

Clear

Blade shape type
- Square
- For Keyway
Clear

Number of flutes(sheet)
1

2

3

4

6

8

10

12

14

16

18
Clear

Tool Material Type
Details

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
- Other
Images

Clear

Shank diameter (d)(mm)
4

5

BS5

6

7

8

9

10

11

12

15

16

19

20

24

25

32

42
Drawing

Clear

Coating
Details

Clear

Overall Length (L)(mm)
- 27
- 31～38
  - 31
  - 35
  - 38
- 40～48
  - 40
  - 42
  - 45
  - 46
  - 48
- 50～59
  - 50
  - 51
  - 52
  - 53
  - 54
  - 55
  - 56
  - 57
  - 58
  - 59
- 60～69
  - 60
  - 62
  - 63
  - 64
  - 65
  - 66
  - 67
  - 68
  - 69
- 70～79
  - 70
  - 72
  - 73
  - 74
  - 75
  - 76
  - 77
  - 78
  - 79
- 80～89
  - 80
  - 82
  - 83
  - 84
  - 85
  - 89
- 90～97
  - 90
  - 91
  - 92
  - 95
  - 97
- 100～108
  - 100
  - 101
  - 104
  - 105
  - 108
- 110～119
  - 110
  - 115
  - 116
  - 119
- 120～127
  - 120
  - 121
  - 122
  - 124
  - 125
  - 127
- 130～137
  - 130
  - 132
  - 134
  - 135
  - 137
- 140～149
  - 140
  - 142
  - 144
  - 145
  - 147
  - 149
- 150～155
  - 150
  - 154
  - 155
- 160～169
  - 160
  - 162
  - 165
  - 169
- 170～178
  - 170
  - 173
  - 175
  - 178
- 180～189
  - 180
  - 182
  - 183
  - 184
  - 185
  - 186
  - 188
  - 189
- 190～198
  - 190
  - 191
  - 193
  - 195
  - 198
- 200～208
  - 200
  - 202
  - 203
  - 205
  - 208
- 210～215
  - 210
  - 213
  - 215
- 220～225
  - 220
  - 222
  - 224
  - 225
- 230～235.5
  - 230
  - 233
  - 235
  - 235.5
- 240～245.5
  - 240
  - 245
  - 245.5
- 250～255
  - 250
  - 250.5
  - 253
  - 255
- 260～265
  - 260
  - 265
- 270～275
  - 270
  - 275
- 280～288
  - 280
  - 283
  - 285
  - 288
- 290～295
  - 290
  - 295
- 300
- 340
- 350
- 400
Drawing

Clear