Micrometers（Page 4）

?* Information on days to ship and prices

• 

  Digital Tube Micrometer, Spherical Anvil

  MITUTOYO

  This Digimatic Tube Micrometer allows you to measure curved surfaces such as the wall thickness of tubes, bearings and rings.

  Select to compare

  Configure now
  Starting from∗ ：	648.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Tubular Inside Micrometer (Rod)

  MITUTOYO

  This is an extension rod type inside micrometer that offers you the following benefits:
  - Interchangeable extensions with cylindrical gage rods are spring-mounted in protective sleeves so you can extend the measuring range.
  - Carbide measuring faces
  - Digimatic type, with data output
  - It has excellent resistance against water and dust (IP65 protection level) enabling you to use it in machining situations that include splashing coolant fluid.

  Select to compare

  Configure now
  Starting from∗ ：	1,310.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Disc Micrometer

  MITUTOYO

  This Disc Micrometer enables you to measure hard-to-reach features, offering you the following benefits:
  - Measuring the root tangent length of spur and helical gears.
  - You can measure recessed features that are difficult to reach with a standard micrometer.

  Select to compare

  Configure now
  Starting from∗ ：	269.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Disc Micrometer Non-Rotating Spindle Type

  MITUTOYO

  This Disc Micrometer has a non-rotating spindle and allows you measure a range of different materials.
  It offers you the following benefits:
  - It features a non-rotating spindle and disc-shaped measuring surfaces.
  - Measuring the root tangent length of spur and helical gears
  - Measurable range of gear pitch: 0.5-6 module
  - It's suitable for measuring materials such as felt, rubber, cardboard and fabric.

  Select to compare

  Configure now
  Starting from∗ ：	325.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Inside Micrometer Checker

  MITUTOYO

  This Inside Micro Checker offers you the following benefits:
  - Applicable for Series 133, 139 and 145 (over 50 mm)
  - Not applicable for Series 137, 141, 337 and 339
  - It designed to act as a setting standard for inside micrometers.
  - It comes with ceramic gauge blocks.

  Select to compare

  Configure now
  Starting from∗ ：	2,314.47 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Disc Micrometer Non-Rotating Spindle Type, Inch

  MITUTOYO

  This Disc Micrometer has a non-rotating spindle and allows you measure a range of different materials.
  It offers you the following benefits:
  - It features a non-rotating spindle and disc-shaped measuring surfaces.
  - Measuring the root tangent length of spur and helical gears
  - Measurable range of gear pitch: 0.5-6 module
  - It's suitable for measuring materials such as felt, rubber, cardboard and fabric.

  Select to compare

  Configure now
  Starting from∗ ：	325.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Disc Micrometer, Inch

  MITUTOYO

  A Mitutoyo non-digital micrometer provided with disc-ended spindle and anvil to enable measurement of shrouded features, such as gear teeth. A ratchet stop guarantees repeatable measurement.

  Select to compare

  Configure now
  Starting from∗ ：	269.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Display Unit Borematic Series 568, Inch/Metric

  MITUTOYO

  Select to compare

  Configure now
  Starting from∗ ：	1,234.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Display Unit Borematic Series 568, Metric

  MITUTOYO

  Select to compare

  Configure now
  Starting from∗ ：	1,234.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  External Dial Caliper Gauge

  MITUTOYO

  This analog External Dial Caliper Gauge offers you the following benefits:
  - Excellent resistance against water and dust (IP65 protection level)
  - Optimized measuring force
  - Ergonomically designed to lie securely in your hand when measuring

  Select to compare

  Configure now
  Starting from∗ ：	589.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Fixture for Micrometer Head, Plain Stem

  MITUTOYO

  Mitutoyo offers various types of fixture designed for micrometer heads, which you can use for a wide range of applications, that have the following benefits:
  - These fixtures are high quality and durable, manufactured from nickel-plated cast iron.
  - Two types of fixture for micrometer heads are available, depending on whether the head has a plain stem or is a clamp nut type.

  Select to compare

  Configure now
  Starting from∗ ：	43.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Fixture for Micrometer Head, with Clamp Nut

  MITUTOYO

  Mitutoyo offers various types of fixture designed for micrometer heads, which you can use for a wide range of applications, that have the following benefits:
  - These fixtures are high quality and durable, manufactured from nickel-plated cast iron.
  - Two types of fixture for micrometer heads are available, depending on whether the head has a plain stem or is a clamp nut type.

  Select to compare

  Configure now
  Starting from∗ ：	43.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Gear Tooth Micrometer

  MITUTOYO

  Measuring the over-pin diameter of gears. It has interchangeable steel or carbide ball inserts (optional accessory).

  Select to compare

  Configure now
  Starting from∗ ：	410.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Groove Micrometer, Rotating Spindle

  MITUTOYO

  A Mitutoyo non-digital tubular micrometer equipped with concentric, disc-shaped anvils for making measurements inside holes, such as width, depth and location of grooves and projections. Separate graduations for inside and outside measurements avoid need for corrections for anvil thickness. A ratchet stop guarantees repeatable measurement.

  Select to compare

  Configure now
  Starting from∗ ：	447.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  High Accuracy Digital Micrometer

  MITUTOYO

  This Micrometer enables 0.1 μm resolution measurements and is ideal for customers who need to make highly accurate measurements with a hand-held tool (such as Gauge R & R analysis).
  The Absolute High-Accuracy Micrometer offers the following benefits:
  - It delivers higher accuracy without sacrificing operability, by using Mitutoyo‘s innovative 0.1 μm resolution ABS (absolute) rotary sensor and high accuracy screw machining technology which reduces instrumental error to just 0.5 μm.
  - Its highly rigid frame and high-performance constant-force mechanism (7-9 N) enable more stable measurement.

  Select to compare

  Configure now
  Starting from∗ ：	2,006.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  High Accuracy Digital Micrometer, Inch

  MITUTOYO

  This Micrometer enables 0.1 μm resolution measurements and is ideal for customers who need to make highly accurate measurements with a hand-held tool (such as Gauge R & R analysis).
  The Absolute High-Accuracy Micrometer offers the following benefits:
  - It delivers higher accuracy without sacrificing operability, by using Mitutoyo‘s innovative 0.1 μm resolution ABS (absolute) rotary sensor and high accuracy screw machining technology which reduces instrumental error to just 0.5 μm.
  - Its highly rigid frame and high-performance constant-force mechanism (7-9 N) enable more stable measurement.

  Select to compare

  Configure now
  Starting from∗ ：	1,457.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Holtest Internal Micrometer, Series 368

  MITUTOYO

  This is a set of three-point and two-point internal micrometers that offers you the following benefits:
  - Complete unit set
  - Carbide measuring surface
  - Titanium-coated measuring pins give you excellent durability and impact resistance.
  - Delivered with setting rings and extension rod.

  Select to compare

  Configure now
  Starting from∗ ：	384.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Hub Micrometer

  MITUTOYO

  A Mitutoyo non-digital micrometer for measuring hub thickness and shoulder width inside a hole. A ratchet stop guarantees repeatable measurement.

  Select to compare

  Configure now
  Starting from∗ ：	315.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Indicating Micrometer with Button Left

  MITUTOYO

  A Mitutoyo non-digital, rapid-retraction-anvil indicating micrometer equipped with a high resolution dial indicator.

  Select to compare

  Configure now
  Starting from∗ ：	843.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Indicating Micrometer with Button Right

  MITUTOYO

  A Mitutoyo non-digital, rapid-retraction-anvil indicating micrometer equipped with a high resolution dial indicator.

  Select to compare

  Configure now
  Starting from∗ ：	859.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Inside Micrometer

  MITUTOYO

  This is an extension rod type inside micrometer that offers you the following benefits:
  - Interchangeable extensions with cylindrical gage rods are spring-mounted in protective sleeves so you can extend the measuring range.
  - Carbide measuring faces are available.

  Select to compare

  Configure now
  Starting from∗ ：	177.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Outside Micrometer Economy Design Set

  MITUTOYO

  This Mitutoyo set of basic, cost effective, non-digital micrometers incorporating ratchet stops to guarantee repeatable measurement.

  Select to compare

  Configure now
  Starting from∗ ：	290.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Inside Micrometer, Interchangeable Rods

  MITUTOYO

  This an interchangeable rod type inside micrometer that offers you the following benefits:
  - Interchangeable measuring rods and spacers achieve the full specified measuring range.
  - Each interchangeable rod is marked with its measuring range.
  An extension handle to help you measure deep bores is included in sets up to 300 mm range.

  Select to compare

  Configure now
  Starting from∗ ：	80.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Interchangeable Anvil Micrometer

  MITUTOYO

  A Mitutoyo non-digital micrometer that accepts easily interchangeable anvils to enable a wide variety of measurement, such as tubing thickness, shoulder-edge distance and rivet height. A ratchet stop guarantees repeatable measurement.

  Select to compare

  Configure now
  Starting from∗ ：	333.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Interchangeable Tip Set (Whitworth)

  MITUTOYO

  A set of matching Mitutoyo anvil and spindle tips to fit Series 126/326 Screw Thread Micrometers to cover the range 60-3.5 TPI Whitworth.

  Select to compare

  Configure now
  Starting from∗ ：	886.84 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Interchangeable Tips

  MITUTOYO

  A pair of matching Mitutoyo anvil and spindle tips to fit Series 126/326 Screw Thread Micrometers.

  Select to compare

  Configure now
  Starting from∗ ：	77.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Internal Groove Micrometer

  MITUTOYO

  A non-digital tubular Mitutoyo micrometer equipped with concentric, disc-shaped anvils for making measurements inside holes, such as width, depth and location of grooves and projections. Separate graduations for inside and outside measurements avoid need for corrections for anvil thickness. A ratchet stop guarantees repeatable measurement.

  Select to compare

  Configure now
  Starting from∗ ：	543.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Limit Micrometer

  MITUTOYO

  A dual, non-digital Mitutoyo micrometer arranged as a GO/NG adjustable snap gauge, able to test component size against upper and lower tolerance limits simultaneously.

  Select to compare

  Configure now
  Starting from∗ ：	476.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head Locking Screw Type, Spherical Spindle

  MITUTOYO

  These micrometer heads feature a knurled locking screw so you can lock the spindle in any position with the knurled locking screw.

  Select to compare

  Configure now
  Starting from∗ ：	97.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head Non-rotating Spindle

  MITUTOYO

  - Micrometer Head featuring a non-rotating spindle for delicate workpieces
  - Design suits applications where the twisting effect of the standard spindle is undesirable because of the risk of damage

  Select to compare

  Configure now
  Starting from∗ ：	169.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head XY-Stage

  MITUTOYO

  A Y-axis style bidirectionally graduated large-thimble, non-digital Mitutoyo micrometer head with plain Ø 18 mm stem and heavy-duty Ø 8 mm spindle fitted with flat non-rotating tip.

  Select to compare

  Configure now
  Starting from∗ ：	289.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head Zero Adjustable

  MITUTOYO

  These are a standard type of small size micrometer heads with a zero-adjustable thimble.
  They offer the following benefits:
  - You can make a zero-setting at any position by loosening the setscrew in the thimble.

  Select to compare

  Configure now
  Starting from∗ ：	89.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Carbide Tipped Spindle

  MITUTOYO

  This small micrometer head with tungsten carbide measuring surface offers you the following benefits:
  - Stem with clamp nut and a flat or spherical spindle end
  - Stem with carbide-tipped spindle

  Select to compare

  Configure now
  Starting from∗ ：	72.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Heavy Duty

  MITUTOYO

  These micrometer heads are a medium-sized, standard type.
  They offer the following benefits:
  - 8 mm diameter spindle
  - Extremely sturdy micrometer head with or without a ratchet.

  Select to compare

  Configure now
  Starting from∗ ：	119.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Heavy Duty, with Clamp Nut

  MITUTOYO

  These micrometer heads are a medium-sized, standard type.
  They offer the following benefits:
  - 8 mm diameter spindle
  - Extremely sturdy micrometer head with or without a ratchet.

  Select to compare

  Configure now
  Starting from∗ ：	125.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Large Thimble Type

  MITUTOYO

  These micrometer heads come with a large thimble, allowing you to make fine adjustments.
  They offer the following benefits:
  - The large scale drum allows fine graduation and very easy rotation.

  Select to compare

  Configure now
  Starting from∗ ：	293.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Large Thimble Type, with Clamp Nut

  MITUTOYO

  These micrometer heads come with a large thimble, allowing you to make fine adjustments.
  They offer the following benefits:
  - The large scale drum allows fine graduation and very easy rotation.

  Select to compare

  Configure now
  Starting from∗ ：	82.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Locking Screw Type, Spherical

  MITUTOYO

  These micrometer heads feature a knurled locking screw so you can lock the spindle in any position with the knurled locking screw.

  Select to compare

  Configure now
  Starting from∗ ：	74.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Short Thimble Type

  MITUTOYO

  Short thimble type with thimble diameter options.

  Select to compare

  Configure now
  Starting from∗ ：	70.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Short Thimble Type, with Clamp Nut

  MITUTOYO

  Short thimble type with thimble diameter options.

  Select to compare

  Configure now
  Starting from∗ ：	70.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Small Standard Type

  MITUTOYO

  This is a standard, small-sized micrometer head which offers you the following benefits:
  - Plain stem and a flat or spherical spindle end
  - Hardened steel measuring surface

  Select to compare

  Configure now
  Starting from∗ ：	57.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Ultra Small Type

  MITUTOYO

  This ultra-small micrometer head allows you to easily incorporate it into machines and offers you the following benefits:
  - Plain stem and a flat spindle end
  - Hardened steel measuring surface

  Select to compare

  Configure now
  Starting from∗ ：	60.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Ultra Small Type, with Clamp Nut

  MITUTOYO

  This ultra-small micrometer head allows you to easily incorporate it into machines and offers you the following benefits:
  - Plain stem and a flat spindle end
  - Hardened steel measuring surface

  Select to compare

  Configure now
  Starting from∗ ：	63.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Spanner

  MITUTOYO

  Select to compare

  Configure now
  Starting from∗ ：	7.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Stand

  MITUTOYO

  These Mitutoyo stands are designed to allow bench-top use of hand micrometers or other gauges which have frames suitable for gripping by the clamp.

  Select to compare

  Configure now
  Starting from∗ ：	58.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...