hishiko Welding Rods
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Coated Arc Welding Rod for Cast Iron GRICAST1
hishiko
[Features]
· GRICAST1 is an arc welding electrode for cast iron use that has a graphite-based coat and a pure Ni core wire, enabling stable welding to be done using a low current.
· Welded parts harden very little to enable simple machining that is suitable for welding parts under water pressure.
· Excellent weldability where blow holes, cracks and other welding defects are unlikely, as well as incredible X-ray performance and mechanical properties.
· Welded metal expands and shrinks very little and has excellent crack resistance.
· Welded metal is white in color.Starting from∗ ： 846.56 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Coated Arc Welding Rod for Cast Iron GN-311
hishiko
[Features]
· GN-311 is a coated arc welding electrode for cast iron use that uses graphite-based with a 36%Ni-Fe cladded core wire, and shows none of the rod scorching associated with general alloy core wires.
· Featuring a composition that improves plating performance after welding by reducing Ni down to 40% or less.
· Welded metal is low Ni rather than typical Fe-Ni, so it is more suited to build up welding of cast iron which requires hardness and also enables surface treatment for materials such as hard Cr plating to be easily performed.
· Welded metal has excellent crack resistance and mechanical properties.Starting from∗ ： 489.41 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
MAG Welding Solid Wire for Cast Iron GN-55SN
hishiko
[Features]
· GN-55SN is a MAG welding solid wire for cast iron with a chemical composition for the welded metal which is 57%Ni-special element-remainder made of Fe.
· Welded metal has excellent mechanical properties and has high reliability for pressure-resistant and thick-walled parts, etc.
· Also has excellent workability with little hardening of welded parts, simplifying welded machining operations. Weld defects are unlikely to occur and X-ray performance is excellent.
· Excellent work efficiency, possible to obtain more than 3 times the efficiency of shielded metal arc welding.Starting from∗ ： 1,560.84 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
MAG Welding Solid Wire for Cast Iron GN-311S
hishiko
[Features]
· For GN-311S, keeping the Ni down to around 40%, this component will improve the plating properties after welding.
· Welded metal is low Ni rather than typical Fe-Ni, so it is more suited to build up welding of cast iron which requires hardness and also enables surface treatment for materials such as hard Cr plating to be easily performed.
· Welded metal has excellent crack resistance and mechanical properties.Starting from∗ ： 1,415.34 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Pure Ni Type TIG Welding Rod for Cast Iron Welding GN-100T
hishiko
[Features]
· GN-100T is a TIG welding rod used for welding pure Ni-based cast iron. Cold welding is possible, which results in favorable physical properties for the deposited weld metal, with little expansion/contraction and exceptional crack resistance. Well suited to welding especially thick things and components requiring great strength.
· Workability is good, hardening of welds is less, and finishing work is easy.Starting from∗ ： 648.14 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Fe-Ni Type TIG Welding Rod for Cast Iron Welding GN-55T
hishiko
[Features]
· GN-55T is a TIG welding rod used for welding cast iron with a chemical composition of 45%Fe-55%Ni, which allows cold welding to be performed, providing favorable physical properties for the deposited weld metal, with little expansion/contraction and exceptional crack resistance. Well suited to welding especially thick things and components requiring great strength.
· Workability is good, hardening of welds is less, and finishing work is easy.Starting from∗ ： 608.46 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Shielded Metal Arc Welding Rod for Cr-18% / Ni-8% Stainless Steel HS-308
hishiko
[Features]
· This product enables outstanding weld workability by providing 19% Cr - 9% Ni austenitic structure weld metal that contains the appropriate amount of ferrite, a stable arc, minimal sputter and excellent slag removal.
· It has low susceptibility to cracking and enables a weld metal with excellent mechanical properties to be obtained.
· Because HS-308L has low carbon content, it features excellent heat and corrosion resistance, and deposits less chromium carbide, offering excellent grain boundary corrosion resistance even if the welding is left as is.- Volume Discount
Starting from∗ ： 100.65 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Shielded Metal Arc Welding Rod for Cr-22% / Ni-12% Stainless Steel HS-309
hishiko
[Features]
· This product provides weld metal that has outstanding mechanical properties, with a 25% Cr - 12% Ni austenitic structure that contains the appropriate amount of ferrite and low cracking susceptibility. Provides excellent welding workability thanks to its stable arc, as well as reduced spatter production and slug removability, etc.
· Contains a large amount of chromium and nickel, which gives it excellent heat and corrosion resistance properties, enabling it to demonstrate stable structure even when diluted with different metal matrix composites such as carbon steel, etc.
· Because HS-309L has low carbon content, it features excellent heat and corrosion resistance, and deposits less chromium carbide, offering excellent grain boundary corrosion resistance even if the welding is left as is.- Volume Discount
Starting from∗ ： 96.32 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Shielded Metal Arc Welding Rod for Cr-22% / Ni-12% Stainless Steel HS-309L
hishiko
[Features]
· This product provides weld metal that has outstanding mechanical properties, with a 25% Cr - 12% Ni austenitic structure that contains the appropriate amount of ferrite and low cracking susceptibility. Provides excellent welding workability thanks to its stable arc, as well as reduced spatter production and slug removability, etc.
· Contains a large amount of chromium and nickel, which gives it excellent heat and corrosion resistance properties, enabling it to demonstrate stable structure even when diluted with different metal matrix composites such as carbon steel, etc.
· Because HS-309L has low carbon content, it features excellent heat and corrosion resistance, and deposits less chromium carbide, offering excellent grain boundary corrosion resistance even if the welding is left as is.Starting from∗ ： 124.69 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Gas-Shielded Solid Arc Welding Wire for Austenite + Ferritic Stainless Steel GRINOX29S
hishiko
[Features]
· GRINOX29S is an austenitic and ferritic gas shielded solid welding wire, and since its composition is designed to reduce shrinkage stress during cooling, it is particularly ideal for adhesion of highly crack-sensitive materials such as alloy steel, etc., as well as underlaying of hardening materials in build-up welding.
· It has machining hardening property, excellent impact resistance, high Cr and excellent heat and corrosion resistance.Starting from∗ ： 806.87 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
TIG Welding Rod for Cr-18% / Ni-8% Stainless Steel HS-308T
hishiko
[Features]
· A TIG welding bar made of austenitic+ferritic stainless steel, composed of 19%Cr-9%Ni. Most generally used for stainless steel structures.
· Features excellent crack resistance, heat and corrosion resistance, and mechanical characteristics. Because HS-308LT has low carbon content, it provides good grain boundary corrosion resistance even if the welding is left as is.- Volume Discount
Starting from∗ ： 95.85 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
TIG Welding Rod for Cr-18% / Ni-8% Stainless Steel HS-308LT
hishiko
[Features]
· A TIG welding bar made of austenitic+ferritic stainless steel, composed of 19%Cr-9%Ni. Most generally used for stainless steel structures.
· Features excellent crack resistance, heat and corrosion resistance, and mechanical characteristics. Because HS-308LT has low carbon content, it provides good grain boundary corrosion resistance even if the welding is left as is.- Volume Discount
Starting from∗ ： 115.08 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
TIG Welding Rod for Cr-22% / Ni-12% Stainless Steel HS-309T
hishiko
[Features]
· A TIG welding bar made of austenitic+ferritic stainless steel, composed of 24%Cr-13%Ni.
· Contains a high volume of Cr and Ni, so it is suitable for welding dissimilar materials with carbon steel / low-alloy steel and stainless steel, etc.
· Because HS-309LT has low carbon content, it is also suitable for underlaying during build-up welding of low carbon stainless steel.Starting from∗ ： 122.29 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
TIG Welding Rod for Cr-22% / Ni-12% Stainless Steel HS-309LT
hishiko
[Features]
· A TIG welding bar made of austenitic+ferritic stainless steel, composed of 24%Cr-13%Ni.
· Contains a high volume of Cr and Ni, so it is suitable for welding dissimilar materials with carbon steel / low-alloy steel and stainless steel, etc.
· Because HS-309LT has low carbon content, it is also suitable for underlaying during build-up welding of low carbon stainless steel.Starting from∗ ： 134.32 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Coated Arc Welding Rod for Soil/Sand Wear-Resistance KF-30CR
hishiko
[Features]
· Since high Cr cast iron based welding bar generates high hardness Cr carbide, it is suitable for erosion wear resistance.
· Aside from wear resistance, it is also excellent in heat resistance and corrosion resistance.
· An easy arc start for excellent welding workability.Starting from∗ ： 220.87 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Coated Arc Welding Rod for Soil/Sand Wear-Resistance KF-25CR-3
hishiko
[Features]
· High Cr cast iron based welding bar generates Cr carbide and also Nb, Mo, W, V carbides, to show an extremely high hardness and superior wear resistance in regards to erosion and scratch wear.
· There are almost no drops in hardness, even in temperatures as high as 600°C. It also boasts excellent corrosion resistance, making it suitable for wear-resistance applications in high temperatures and in corrosive environments.Starting from∗ ： 661.37 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Product Type |
| Pole diameter(mm) |
| Wire Diameter(mm) |
| Pole length(mm) |
| Current range, lower(A) |
| Current range, vertical position, elevating, upper |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | hishiko | hishiko | hishiko | hishiko | hishiko | hishiko | hishiko | hishiko | hishiko | hishiko | hishiko | hishiko | hishiko | hishiko | hishiko | hishiko |
| Product Series | Shielded Metal Arc Welding Rod for Cr-18% / Ni-8% Stainless Steel HS-308 | Shielded Metal Arc Welding Rod for Cr-22% / Ni-12% Stainless Steel HS-309 | Shielded Metal Arc Welding Rod for Cr-22% / Ni-12% Stainless Steel HS-309L | Gas-Shielded Solid Arc Welding Wire for Austenite + Ferritic Stainless Steel GRINOX29S | TIG Welding Rod for Cr-22% / Ni-12% Stainless Steel HS-309LT | Coated Arc Welding Rod for Soil/Sand Wear-Resistance KF-30CR | Coated Arc Welding Rod for Soil/Sand Wear-Resistance KF-25CR-3 | |||||||||
| Starting from∗ | 846.56 € *Unit price with basic configuration | 489.41 € *Unit price with basic configuration | 1,560.84 € *Unit price with basic configuration | 1,415.34 € *Unit price with basic configuration | 648.14 € *Unit price with basic configuration | 608.46 € *Unit price with basic configuration | 100.65 € *Unit price with basic configuration Volume Discount | 96.32 € *Unit price with basic configuration Volume Discount | 124.69 € *Unit price with basic configuration | 806.87 € *Unit price with basic configuration | 95.85 € *Unit price with basic configuration Volume Discount | 115.08 € *Unit price with basic configuration Volume Discount | 122.29 € *Unit price with basic configuration | 134.32 € *Unit price with basic configuration | 220.87 € *Unit price with basic configuration | 661.37 € *Unit price with basic configuration |
| Min. Shipping Days ： | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 9 Days | 7 Days | 7 Days | 7 Days | 7 Days | 9 Days | 9 Days |
| Product Type | Welding rod | Welding rod | Welding wire | Welding wire | Welding rod | Welding rod | Welding rod | Welding rod | Welding rod | Welding wire | Welding rod | Welding rod | Welding rod | Welding rod | Welding rod | Welding rod |
| Pole diameter(mm) | 3.2 | 3.2 ～ 4 | - | - | 1.6 ～ 2.4 | 1.6 ～ 2 | 2.6 ～ 4 | 2.6 ～ 4 | 3.2 ～ 4 | - | 2 ～ 3.2 | 1.2 ～ 2 | 1.2 ～ 2.4 | 1.2 ～ 3.2 | 3.2 ～ 4 | 4 |
| Wire Diameter(mm) | - | - | 1.2 | 1.2 | - | - | - | - | - | 1.2 | - | - | - | - | - | - |
| Pole length(mm) | 350 | 350 | - | - | 1000 | 1000 | 300 ～ 350 | 300 ～ 350 | 350 | - | 1000 | 1000 | 1000 | 1000 | 350 ～ 400 | 400 |
| Current range, lower(A) | 70~100 | 60–100 ～ 90~140 | 70～110 | 70～110 | - | - | 50～80 ～ 110～150 | 50～80 ～ 110～150 | 80–120 ～ 110～150 | 80～200 | - | - | - | - | 80~150 ～ 130～180 | 140~200 |
| Current range, vertical position, elevating, upper | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Product Type
-
Pole diameter(mm)
-
Wire Diameter(mm)
-
Pole length(mm)
-
Current range, lower(A)
- 10–30
- 15–40
- 35~60
- 40~50
- 45–65
- 50～80
- 50~85
- 50~90
- 50~100
- 50～120
- 50–150
- 50~200
- 50～220
- 50~250
- 55～80
- 55~85
- 55～90
- 60–100
- 70~100
- 70～110
- 70～120
- 70~140
- 70～250
- 80–120
- 80～130
- 80~150
- 80～200
- 80～280
- 80～300
- 80～350
- 85～140
- 90~130
- 90~140
- 100–140
- 100~150
- 100–200
- 100–250
- 110～150
- 120～130
- 120～180
- 120～190
- 120~300
- 130～180
- 130~190
- 140 to 180
- 140~190
- 140~200
- 150~200
- 150~250
- 150～300
- 150～350
- 150～470
- 160～350
- 170~250
- 170～400
- 180–200
- 180～240
- 180～260
- 180～350
- 180~400
- 190~240
- 190～250
- 200～350
- 200~400
- 200 to 450
- 200～550
- 220–240
- 300~500
-
Current range, vertical position, elevating, upper
- 10–30
- 10~35
- 30~50
- 35~60
- 40–60
- 40–70
- 45 to 75
- 45～80
- 50–70
- 50～80
- 50~90
- 50～90/50～90
- 50～120・50～100
- 50～140・50～100
- 50～140/50～120
- 50～150/50～150
- 50～160・50～120
- 50～160/50～160
- 50～180/50～140
- 50～180/50～180
- 60~80
- 60~110
- 60~120
- 60～130/60～130
- 65～105
- 65～110
- 70～160/70～120
- 80–120
- 80～130
- 80～130/80～130
- 80～180/80～150
- 80～180・80～150
- 85～135
- 90~130
- 90～150/90～150
- 100~150
- 100~160
- 100～170/100～170
- 110~140
- 110~170
- 120～170
- 120～180
- 120～220
- 130～170/130～170
- 130～200
- 135～210
- 140～210
- 150~200
- 180～240
- -
Narrow search by specifying Brand
-
- KOBE STEEL (34)
- hishiko (16)
- NIPPON WELDING ROD (14)
- STAR ELECTRIC MANUFACTURING (11)
- TASETO (11)
- NITTETSUSUMIKIN (7)
- NIKKEI SANGYO (4)
- STEINEL (4)
- TRUSCO NAKAYAMA (3)
- DAIDO STEEL (2)
- H & H (2)
- PANASONIC WELDING SYSTEMS (2)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Welding Rods
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.