Spring Locating Pins（Page 2）

?* Information on days to ship and prices

• • Promotional pricing

  

  Spring Body Cone Type SBC

  KONISHI MFG

  [Features]
  · An extremely simplified type plunger in which the pin and spring are integrated.
  · The ball plunger can be used on the receiving side.
  · Install by pressing or driving in.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.39 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Lateral Plungers, with thread, with female thread

  HALDER

  To be used for positioning and applying pressure, e.g. during painting and sandblasting.
  

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.31 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Eccentric bushings for side thrust pins

  GANTER

  Eccentric bushings GN 715.2 allow side thrust pins GN 715 / GN 714 to be adjusted. These bushings allow the side thrust pin to be precisely adjusted to suit the requirements for clamping of a component.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.30 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Mounting tools for GN 713

  GANTER

  [Specifications]
  ・Type: 713.1
  
  Mounting tools for GN 713

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Mounting tools for GN 715 / GN 714

  GANTER

  Mounting tools for GN 715 / GN 714

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.46 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Screw drivers for GN 611

  GANTER

  [Specifications]
  ・Type: 611.5
  
  Screw drivers for GN 611

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	57.82 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Side thrust pins without pressure pin, press on type

  GANTER

  Side thrust pins GN 714 are the result of further development of GN 715. It is left to the customer to design his own pressure pin which can be screwed into the thrust plate.
  This design extends the field of applications for side thrust pins offering identical advantages i.e. they eliminate costly alternatives, are space saving and are simple to install. The knurled body requires bore to H8 tolerance only.
  For easy mounting a suitable tool GN 715.1 -... is available (see table).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.12 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring plungers with bolt, Stainless Steel

  GANTER

  Stainless Steel-Spring plungers GN 616 are used as detents as well as for push-on and push-off applications and ejectors.
  The slot on the plunger side is provided for blind hole applications. A special screw driver GN 616.5-... is available (see table).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.92 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spring plungers with collar, Steel

  GANTER

  Spring plungers GN 815 are used as stops as well as thrust elements or ejectors.
  The collar gives a defined installation position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.40 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Spring plungers, Plastic

  GANTER

  Plastic-Spring plungers GN 615.2 are used as detents as well as for push-on and push-off applications and ejectors.
  These spring plungers are all stainless versions.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.52 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Spring plungers, Ball with friction bearing, with internal hexagon (GN 615.9 )

  GANTER

  GN 615.9 spring plungers are used for locking as well as for pressure and hold-off functions.
  
  The ball is mounted in a plastic shell so as to be freely movable, which enables rolling and therefor generally optimizes the locking characteristics. Above all, this reduces wear on the counter piece.
  
  A further characteristic of these plungers is that the plastic bearing acts as an electrical insulator.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.62 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Spring plungers, Ball with friction bearing, with slot (GN 615.8 )

  GANTER

  GN 615.8 Spring plungers are used for locking as well as for pressure and hold-off functions.
  
  The ball is mounted in a plastic shell so as to be freely movable, which enables rolling and therefor generally optimizes the locking characteristics. Above all, this reduces wear on the counter piece.
  
  A further characteristic of these plungers is that the plastic bearing acts as an electrical insulator.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.86 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Spring plungers, with ball, with collar, with internal hexagon

  GANTER

  Spring plungers GN 815.1 are used as stops as well as thrust elements or ejectors. The collar gives a defined installation position.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.36 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Spring plungers, with sealed bolt (GN 616.1)

  GANTER

  GN 616.1 Stainless Steel-Spring plungers are used for locking as well as for pressure and hold-off functions. Entry of liquids and dirt is prevented by the seal.
  
  The slit on the plunger side is used for screwing into pocket holes. For this, a special screwdriver is available as GN 616.5-M... (see table).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.18 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Spring plungers, with ceramic ball, Stainless Steel A4 (GN 615.5)

  GANTER

  GN 615.5 Stainless Steel-Spring plungers are used for locking as well as for pressure and hold-off functions.
  
  Due to the selection of materials, the Stainless Steel-Spring plungers are suitable for use in highly corrosive environments. In addition the ceramic ball is low wearing, anti-magnetic and electrically insulating.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Spring plungers, with sealed bolt (GN 616.1)

  GANTER

  GN 616.1 Stainless Steel-Spring plungers are used for locking as well as for pressure and hold-off functions. Entry of liquids and dirt is prevented by the seal.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.96 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Spring plungers, without thread, ball with friction bearing (GN 614.8)

  GANTER

  GN 614.8 Stainless Steel-Spring plungers are used for locking as well as for pressure and hold-off functions.
  
  The ball is mounted in a plastic shell so as to be freely movable, which enables rolling and therefor generally optimizes the locking characteristics. Above all, this reduces wear on the counter piece.
  
  A further characteristic of these plungers is that the plastic bearing acts as an electrical insulator.
  
  For the mounting hole, tolerance d1 F8 is recommended for joined fitting and d1 H9 for press fitting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.92 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Limit Plunger

  IFM ELECTRONIC

  [Specifications]
  ・Materials: Limit plunger: free cutting steel; plunger: steel (1.0503 / C45K) hardened on front; Lock nut: brass nickel-plated
  ・Activation Force(N): 4.9-7845

  Select to compare

  Configure now
  Starting from∗ ：	61.23 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spring sleeves, Form B (K1277)

  KIPP

  · Indexing and positioning element
  
  · Application sectors: machine and plant construction, trade, domestic
  
  · Universally applicable

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.33 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Assembly tool, for lateral plungers plastic spring

  HALDER

  [Specifications]
  - Description: Assembly tool
  - Branch: Medical / Rehab technology / Hospital equipment / Food processing / Packaging machinery / Machine construction, general
  - Preferential Origin: CE

  Select to compare

  Configure now
  Starting from∗ ：	16.93 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spring sleeves, Form B (03078)

  NORELEM

  · Indexing and positioning element
  
  · Application sectors: machine and plant construction, trade, domestic
  
  · Universally applicable

  Select to compare

  Configure now
  Starting from∗ ：	0.41 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...