Base（Page 2）

?* Information on days to ship and prices

• 

  Intermediate Ring

  SURUGA SEIKI

  A part used for rod stands. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.23 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Positioning Plate

  SURUGA SEIKI

  A positioning plate that is compatible with a variety of stages. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	41.19 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Carrier for Optical Benches

  SURUGA SEIKI

  A carrier for the A10.
  
  [Features]
  · A carrier for optical benches.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	108.42 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spacer □ 60 for Optical Axis Height Alignment

  SURUGA SEIKI

  A spacer for aligning the optical axis. Used when the assembled height of the stage is insufficient in relation to the configured optical axis etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	26.38 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Rotation Type (Handle Type) Cross Clamp

  SURUGA SEIKI

  [Features]
  · A cross clamp for heavy loads.
  · Poles and rods can be rotated to any angle and then fixed.
  · Fixing is done using a split clamping method.
  · Features a slitted fixing section. Twist the clamp section to securely fix the object.
  · There are three types available for different combinations of applicable diameters.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	136.55 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Rotation Type Cross Clamp

  SURUGA SEIKI

  A cross clamp for fixing a pole or a rod at an arbitrary angle. Poles and rods are fixed using the clamp. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	48.30 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Fixed Type (Handle Type) Cross Clamp

  SURUGA SEIKI

  [Features]
  · A cross clamp for heavy loads.
  · Poles or rods can be orthogonally connected.
  · Fixing is done using split clamping.
  · Features a slitted fixing section. Twist the clamp section to securely fix the object.
  · There are three types available for different combinations of applicable diameters.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	109.17 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Fixed Type Cross Clamp

  SURUGA SEIKI

  A cross clamp for orthogonally connecting poles or rods. Poles and rods are fixed using the clamp. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	38.56 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Universal Base Plate

  SURUGA SEIKI

  A base plate for placing rod stands onto vibration removal boards at any position. Fixes to vibration removal boards using the included clamp. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	68.44 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Adapter Plate

  SURUGA SEIKI

  An adapter plate that is compatible with a variety of stages. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	27.19 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Conversion Spacer

  CHUO PRECISION INDUSTRIAL

  Spacers use a M16P1 screw on the stage, and are for using M6 counterbore holes in an M4 counterbore hole.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.34 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Fixed Type Cross Clamp

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Used to retain holder shafts and poles orthogonally (at 90°) to each other.
  · Available with three diameters; ø8 mm, 12 mm, and ø20 mm. Products are available combining different diameters.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	38.73 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Aluminum Breadboard

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A simple type aluminum laboratory table.
  · Because of its small size, devices and optical type systems can be moved while assembled.
  · The top surface has M4 tapped holes at a pitch of 25 mm as standard.
  · Includes a handle for transportation

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	541.13 €
  Min. Shipping Days ：	16 Days

  *Unit price with basic configuration

• 

  Base Plate

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Used for mounting stages, holders, poles, and other similar items to surface plates with M6 tapped holes.
  · Base plate fixing screws (S-05) can be used for fixing to the surface plate.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.46 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Base Retainer

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Used for mounting stages, holders, poles, and other similar items to surface plates with M6 tapped holes.
  · Use the M16P1 screw to mount the stands such as the ES-12/ES-20. The stage can be mounted using M4 screws.
  · A base plate fixing screw (S-05) can be used for fixing to surface plates.
  · BH-1 can fix base plates in any direction.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	33.80 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Base Plate Fixing Screw【10 Pieces Per Package】

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Can be used for fixing to surface plates.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	36.94 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Stand ø12

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Fixes the shaft of various holders such as a mirror holder.
  · Each fixing height (depth) is available for all shaft diameters (ø8 mm, ø12 mm, and ø20 mm).
  · Clamp screws are used to fix the shaft. Can be fixed in any direction from any of the three points.
  · Equipped as standard with a collar (thickness: 10 mm) which can be used for changing direction while maintaining a fixed height.
  · Clamp screws are provided in two locations (top and bottom) for products with an overall length of 80 mm or more. This helps increase the holding strength.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	37.74 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Stand ø20

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Fixes the shaft of various holders such as a mirror holder.
  · Each fixing height (depth) is available for all shaft diameters (ø8 mm, ø12 mm, and ø20 mm).
  · Clamp screws are used to fix the shaft. Can be fixed in any direction from any of the three points.
  · Equipped as standard with a collar (thickness: 10 mm) which can be used for changing direction while maintaining a fixed height.
  · Clamp screws are provided in two locations (top and bottom) for products with an overall length of 80 mm or more. This helps increase the holding strength.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.57 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Universal Arm

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Each axis can be simultaneously moved in any direction using the handle, and fixed.
  · Even more handy when used in combination using the M16P1 tapped hole on the magnet stand.
  · There are products with ø8 mm, ø12 mm, and ø20 mm holder parts, and products with movable ranges of 0 to 46 mm.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	235.69 €
  Min. Shipping Days ：	16 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  GN 191 T-angle connector clamps, Aluminium

  GANTER

  The clamping bores of GN 191 T-angle connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.92 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Angle connector clamps

  GANTER

  The clamping bores of the angle connector clamps GN 196 are specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	61.18 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Linear actuator connectors / Aluminium / GN 131.1 / 2, with 2 Stainless Steel-clamping screws DIN 912

  GANTER

  GN 131.1 linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
  By means of the clamping screws on the guide bores d1 / d2 the movement can either be set or the linear actuator connector can be clamped (after final adjustment).
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	45.92 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Linear actuator connectors / Aluminium / GN 131.2 / 2, with 2 Stainless Steel-clamping screws DIN 912

  GANTER

  Linear actuator connectors GN 131.2 are normally supplied mounted only in connection with a linear actuator and for function control.
  By means of the clamping screws on the clamping bores d1 / d2 the movement can either be set or the linear actuator connector can be clamped (after final adjustment).
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	47.66 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Linear actuator connectors / Aluminium / GN 134.1 / 2, with 4 Stainless Steel-clamping screws DIN 912

  GANTER

  GN 134.1 linear actuator connectors are normally supplied mounted only in connection with a square linear actuator and for function control.
  The fixing bores for the follower are always located in the lid of the d1 bore and/or the s1 square. Centering bushings in the through-hole eliminate the axial clearance. The width of the s1 square is dimensionally aligned with the play of the square linear actuators.
  The square s2 of the linear actuator connector is supplied not machined in the standard design.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	88.80 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Linear Actuator Connectors / NI, Stainless Steel / GN 131.1 / 2, with 2 Stainless Steel-clamping screws DIN 912

  GANTER

  GN 131.1 Stainless Steel-Linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
  By means of the clamping screws on the guide bores d1 / d2 the movement can either be set or the linear actuator connector can be clamped (after final adjustment).
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911.3 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	134.84 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Linear Actuator Connectors / NI, Stainless Steel / GN 131.2 / 2, with 2 Stainless Steel-clamping screws DIN 912

  GANTER

  Stainless Steel-Linear actuator connectors GN 131.2 are normally supplied mounted only in connection with a linear actuator and for function control.
  By means of the clamping screws on the clamping bores d1 / d2 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911.3 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	208.50 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  T-angle connector clamps / Aluminium / GN 195 / 2, with 6 Stainless Steel-clamping screws DIN 912

  GANTER

  The clamping bores of GN 195 T-angle connector clamps are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The versions with square bores are also suitable for profile systems.
  The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	61.98 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  T-angle linear actuator connectors, Aluminium

  GANTER

  T-angle linear actuator connectors GN 191.1 are normally supplied mounted only in connection with a linear actuator and for function control.
  By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	47.32 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  T-angle linear actuator connectors, Stainless Steel

  GANTER

  GN 191.1 Stainless Steel-T-angle linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
  By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911.3 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	133.42 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Two-way connector clamps, multi part assembly, same bore dimensions

  GANTER

  The clamping bores of GN 134 flanged two-way con-nector clamps are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The versions with square bores are also suitable for profile systems.
  
  Bores and square bores of the same nominal size can be assembled in any combination. For instance, nominal size 20 has the following combination options: B20-B20, B20-V20, V20-B20 and V20-V20.
  
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	36.54 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...