Magnets with Holders（Page 2）

?* Information on days to ship and prices

• 

  Magnets with Holder / Eccentric

  MISUMI

  [Features] A magnet with a latching holder. This magnet with a holder does not rotate when tightened.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.11 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  KM Type Permanent Magnet Holder

  KANETEC

  Can be used for a wide range of applications, such as embedment in press tools and metal molds, mounting on jigs, and holding of works.
  
  [Features]
  · Selectable from five different specifications for the following five aspects according to applications: outer diameter tolerance, plating, painting, outer knurls, and stainless steel.
  · Standardized specifications for outer diameter tolerance h allows the holder to be used for metal molds.
  · The screw holes made on the back widen the range of its applications.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.76 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cap Magnet Square Type (Special Type)

  MAGNA

  Square type (special type) magnet application with magnetic force made stronger by combining a ferrite magnet and yoke (iron). The cap material is SPCC, 50L hole pitch is 25, and Sumitomo 3M VHB double-sided tape is used.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.95 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Ferrite Shallow Pot Magnets with hole

  ECLIPSE MAGNETICS

  Shallow Pot Magnets.
  Max. operating temperature 120°C.
  Mild steel pot.
  Zinc plated body.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.60 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ferrite Shallow Pot Magnets / Male thread

  ECLIPSE MAGNETICS

  Shallow Pot Magnets.
  Max. operating temperature 120°C.
  Mild steel pot.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.40 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Magnets, Plastic

  GANTER

  Magnets GN 53.1 are primarily used for holding drawings and the like.
  The magnetic material ND is characterized by a high adhesive force.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.42 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Raw magnets

  GANTER

  Raw magnets GN 55.1 are unshielded disc-shaped (annular) magnets.
  Owing to their vast range of different magnet materials and sizes, they are suitable for virtually universal use. They are mostly attached by gluing.
  When used without air gap, individual raw magnets always have lower adhesive forces than a magnet system in which shielding and magnetic return enormously intensify the force acting at the adhesion surface. Depending on the air gap between magnet and mating component, individual raw magnets - unlike magnet systems - can have substantially higher adhesive forces.
  In the event that no suitable retaining magnets / magnet systems are available, raw magnets may be used in combination with appropriate holding constructions to build up highly specific magnet systems.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.12 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Cap Neodymium Magnet, Round Type

  MAGFINE

  [Features]
  · Cap magnets make effective use of magnetic energy.
  · While they only adhere on the magnetic side, the magnetic power of one side is concentrated on the end of the cap. As a result, they provide holding force several times stronger than a simple magnet of the same type / size.

  Select to compare

  Configure now
  Starting from∗ ：	90.38 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Magnets deep pot with threaded pin NdFeB, rubber magnetic face (K1397)

  KIPP

  · Protection for sensitive surfaces
  
  · Suitable for use as a stop
  
  · Application sectors: machine, plant and fixture construction
  
  · Temperature range up to 80 °C
  
  · Shielded system

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.27 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Magnets shallow pot NdFeB Form B (K0553)

  KIPP

  · Flexible, easy to remove, non-positive fasteners
  
  · Application sectors: machine and plant construction
  
  · Temperature range up to 80 °C
  
  · Shielded system

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.48 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Magnets shallow pot with external thread hard ferrite Form A (K0549)

  KIPP

  · Flexible, easy to remove, non-positive fasteners
  
  · Application sectors: machine and plant construction
  
  · Temperature range up to 200 °C
  
  · Shielded system

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.94 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Magnets raw, Form B with hole, NdFeB, disc form (09001)

  NORELEM

  · Flexible, easy to remove, non-positive fasteners
  
  · Application sectors: machine and plant construction
  
  · Temperature range up to 80 °C
  
  · Assembly: press in, screw in or glue

  Select to compare

  Configure now
  Starting from∗ ：	8.50 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Magnets shallow pot SmCo, Form A (09066)

  NORELEM

  · Flexible, easy to remove, non-positive fasteners
  
  · Application sectors: machine and plant construction
  
  · Temperature range up to 200 °C
  
  · Shielded system

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.88 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Magnets shallow pot with internal thread hard ferrite with stainless-steel housing (09065-10)

  NORELEM

  · Flexible, easy to remove, non-positive fasteners
  
  · Application sectors: machine and plant construction
  
  · Temperature range up to 220 °C
  
  · Assembly: press in, screw in or glue
  
  · Shielded system

  Select to compare

  Configure now
  Starting from∗ ：	6.00 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Magnets deep pot with threaded pin NdFeB, rubber magnetic face (09117)

  NORELEM

  · Protection for sensitive surfaces
  
  · Suitable for use as a stop
  
  · Application sectors: machine, plant and fixture construction
  
  · Temperature range up to 80 °C
  
  · Shielded system

  Select to compare

  Configure now
  Starting from∗ ：	17.15 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Magnets deep pot with machinable magnetic face NdFeB (09067-11)

  NORELEM

  · Flexible, easy to remove, non-positive fasteners
  
  · Application sectors: machine and plant construction
  
  · Temperature range up to 150 °C
  
  · Assembly: press in, screw in or glue
  
  · Shielded system

  Select to compare

  Configure now
  Starting from∗ ：	4.75 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Magnets deep pot SmCo, Form B (09067)

  NORELEM

  · Flexible, easy to remove, non-positive fasteners
  
  · Application sectors: machine and plant construction
  
  · Temperature range up to 200 °C
  
  · Shielded system
  
  · Height is customer specific

  Select to compare

  Configure now
  Starting from∗ ：	6.29 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Magnets deep pot SmCo, Form A (09067)

  NORELEM

  · Flexible, easy to remove, non-positive fasteners
  
  · Application sectors: machine and plant construction
  
  · Temperature range up to 200 °C
  
  · Shielded system
  
  · Height is customer specific

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.06 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Magnets with Holder / Knurled

  MISUMI

  [Features] A knurled magnet with holder. The heat resistant temperature is 80°C.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.59 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Magnets with Holder / Smooth

  MISUMI

  [Features] A magnet with a cap holder. The magnet does not touch the workpieces directly.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.11 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Magnets with Holder / V-Groove

  MISUMI

  [Features] A magnet with a V-groove and holder. It can push and release a tightened workpiece.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.24 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cap Magnet Square Shape (Type L)

  MAGNA

  Square shape (type L) of applied magnet that has achieved more powerful magnetic force by combining a ferrite magnet and a yoke (iron) to concentrate the force in the fixed direction. Can be mounted easily with the screw holes in the yoke. The attraction power is 5 to 10 times as powerful as a magnet alone.
  
  [Features]
  ▪ No demagnetization occurs because the coercive force is high.
  ▪ It is a sintered magnet (ceramic magnet), excellent in corrosion resistance and suitable for a flat shape but cracked easily.
  ▪ Applications are expanding from the traditional fields including audio speakers and headphones, to cover automotive motors and generators where the demand for products like this is growing as a result of weight reduction (1/2 to 1/3 compared with a conventional one) made possible by technological innovation.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.37 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Neodymium Magnet Plate Catch (with Yoke)

  MAGNA

  High magnetic flux density provides very strong magnetic force. Since the hole for flathead screw is bored directly in the thin and flat magnet, it can be mounted even on a lid easily. Use at 80 °C or below.
  
  [Features]
  • Rare-earth magnets are divided into samarium-cobalt magnets and neodymium magnets.
  • Samarium-cobalt magnets are known to be very powerful.
  • Highly resistant to rust and high temperatures, but some issues with mechanical strength
  • Like neodymium, popular as a compact and lightweight magnetic material
  • Neodymium magnets are said to create the strongest magnetic field of any magnet currently on the market
  • Can be machined into a round, square, or ring shape to suit the application

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.71 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Magnet C-106

  TAKIGEN

  A disk shaped magnet.
  [Features]
  · Can be easily affixed with a single screw.
  · Can be used in conjunction with A-40 or A-176 knurled knob.
  · Made of barium ferrite.
  [Applications]
  · Power distribution boards, measuring equipment and wooden furniture.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.81 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Hexagon-Shaped Permanent Magnetic Holder

  KANETEC

  A magnetic holder with screws for easy mounting.
  [Features]
  · The tip of the permanent magnetic holder is threaded for easy mounting anywhere.
  · When used in combination with the included plate, it can be mounted even in locations where tapped holes cannot be drilled.
  · Because it is coated with metal plating, it can be used in a variety of environments.
  [Applications]
  · Optimal for transporting lightweight objects on jigs or lines, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	20.98 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Ferrite Cap Round【3 Pieces Per Package】

  NIROKU

  [Features]
  · The cap magnet is a product that utilizes magnetic energy effectively.
  · Although it adheres only to magnetic surfaces, because the magnetic force of one side is concentrated at the end of the cap, adsorptive force many times that more powerful than that of single magnets (of the same type and size) can be obtained.

  Select to compare

  Configure now
  Starting from∗ ：	4.25 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Ferrite Cap, Square【3 Pieces Per Package】

  NIROKU

  [Features]
  · The cap magnet is a product that utilizes magnetic energy effectively.
  · Although it adheres only to magnetic surfaces, because the magnetic force of one side is concentrated at the end of the cap, adsorptive force many times that more powerful than that of single magnets (of the same type and size) can be obtained.

  Select to compare

  Configure now
  Starting from∗ ：	5.01 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Ferrite Cap Ring Type【3 Pieces Per Package】

  NIROKU

  [Features]
  · The cap magnet is a product that utilizes magnetic energy effectively.
  · Although it adheres only to magnetic surfaces, because the magnetic force of one side is concentrated at the end of the cap, adsorptive force many times that more powerful than that of single magnets (of the same type and size) can be obtained.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.89 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Neodymium Cap, Square【3 Pieces Per Package】

  NIROKU

  [Features]
  · The cap magnet is a product that utilizes magnetic energy effectively.
  · Although it adheres only to magnetic surfaces, because the magnetic force of one side is concentrated at the end of the cap, adsorptive force many times that more powerful than that of single magnets (of the same type and size) can be obtained.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	22.98 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Ferrite Shallow Pot Magnets with hook and holes

  ECLIPSE MAGNETICS

  Shallow Pot Magnets.
  Max. operating temperature 120°C.
  Mild steel pot with removable hook.
  With three M6 tapped holes to aid mounting products.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	25.77 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Button-type magnets with bore

  GANTER

  The button-type magnets GN 60 have a split adhesive surface. These are non-shielded magnetic systems made by casting method.
  To ensure that the magnetic properties (adhesive forces) are not impaired, the fixing screws must be made of non-magnetic material.
  For easier handling and/or to avoid demagnetisation, these magnets have an iron plate on their adhesive surface.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.42 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Magnets with ball knob / with key ring, with rubber jacket

  GANTER

  Magnets GN 51.7 are a shielded magnetic system with rubber jacket.
  The rubber jacket protects sensitive surfaces from being damaged by the magnet and also delivers a higher friction coefficient, resulting in high lateral adhesion forces.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.00 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Pot magnets with bore

  GANTER

  Pot magnets GN 58 are a shielded magnetic systems.
  To ensure that the magnetic properties (adhesive forces) are not impaired, the fixing screws must be made of non-magnetic material.
  For easier handling and/or to avoid demagnetisation, these magnets have an iron plate on their adhesive surface.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.26 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Retaining magnets for profile systems

  GANTER

  With GN 56 retaining magnets doors, covers or even tools and accessories can simply be attached to profile systems using magnets.
  Thanks to the side-mounted plastic spring elements the retaining magnet can be introduced into a profile nut at any point. When affixed this way, the magnet holds with a multiple of its magnet nominal holding force in the nut. If necessary, the retaining magnet can be taken out of the nut again with a suitable screw driver via the recesses on the front.
  Lightly turning the threaded pin against the groove base stops the retaining magnet from moving in the direction of the nut. Additional protection against sideward movement can be achieved with nuts for T-nuts GN 506, for example.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.12 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Retaining magnets with female thread / AN. AlNiCo / M 6 / GN 52.3

  GANTER

  Retaining magnets GN 52.3 are a shielded magnetic system.
  For easier handling and/or to avoid demagnetisation, these magnets have an iron plate on their adhesive surface.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.02 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Retaining magnets with female thread, with rubber jacket / ND-NdFeB / SW black, WS white / GN 51.2

  GANTER

  Retaining magnets GN 51.2 are a shielded magnetic system with rubber jacket.
  The rubber jacket protects sensitive surfaces from being damaged by the magnet and also delivers a higher friction coefficient, resulting in high lateral adhesion forces.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.02 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Retaining magnets with stud

  GANTER

  Retaining magnets GN 52.4 are a shielded magnetic system.
  Type D with smooth stud is designed for attachment with rivets.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.10 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Retaining magnets with threaded stud, with rubber jacket / ND-NdFeB / SW black, WS white / GN 51.3

  GANTER

  Retaining magnets GN 51.3 are a shielded magnetic system with rubber jacket.
  The rubber jacket protects sensitive surfaces from being damaged by the magnet and also delivers a higher friction coefficient, resulting in high lateral adhesion forces.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.16 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Retaining magnets, rod-shaped with rubber, Stainless Steel

  GANTER

  Stainless Steel-Retaining magnets GN 52.5 are a shielded magnetic system with gummed adhesive surface.
  They are preferably used for sensitive surfaces. Also, the coefficient of friction is increased, with the effect that high lateral retaining forces are achieved.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.68 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Retaining magnets, with 2 female thread, with rubber jacket

  GANTER

  Retaining magnets GN 51.6 are a shielded magnetic system with rubber jacket.
  The rubber jacket protects sensitive surfaces from being damaged by the magnet and also delivers a higher friction coefficient, resulting in high lateral adhesion forces.
  Its dimensions, especially the drill hole spacing m and the thread d2, match the clamp mountings GN 473, GN 477 and GN 480.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.06 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Retaining magnets with bore, with rubber jacket / ND. NdFeB / SW black, WS white / GN 51.4

  GANTER

  [Specifications]
  ・Material: ND. NdFeB
  ・Color: SW black, WS white
  ・Weight(g): 6.0
  ・Nennhaftkräfte [N]: 25. 25
  
  The retaining magnets GN 51.4 with rubber jacket form a system together with the steel part that shields and strengthens the magnet, optimally concentrating the magnetic flux on the rubberized magnetic surface.
  The rubber protects sensitive surfaces from being damaged by the magnet and also delivers a high friction coefficient, resulting in high lateral displacement forces.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.76 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Retaining magnets, cable line assembly

  GANTER

  [Specifications]
  ・Material: ND. NdFeB
  ・Color: SW
  ・h2: 6
  
  The retaining magnets GN 51.9 with rubber jacket form a system together with the steel part that shields and strengthens the magnet, optimally concentrating the magnetic flux on the rubberized magnetic surface.
  Lines and hoses that must be frequently repositioned or removed entirely for maintenance or cleaning can be easily and securely fastened to the cable holder with cable ties.
  The rubber protects sensitive surfaces from being damaged by the magnet and also delivers a high friction coefficient, resulting in high lateral displacement forces.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.52 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Retaining magnets countersunk bore, rubber jacket

  GANTER

  [Specifications]
  ・Material: ND. NdFeB
  ・d3: 12.5
  
  The retaining magnets GN 51.8 with rubber jacket form a system together with the steel part that shields and strengthens the magnet, optimally concentrating the magnetic flux on the rubberized magnetic surface.
  The rubber protects sensitive surfaces from being damaged by the magnet and also delivers a high friction coefficient, resulting in high lateral displacement forces.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.16 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Retaining magnets with female thread / Hard ferrite, SmCo, NdFeB / GN 50.2

  GANTER

  [Specifications]
  ・Material: Hard ferrite, SmCo, NdFeB
  
  Retaining magnets GN 50.2 are combined with the steel housing and the plastic ring into a system that shields and strengthens the magnet for optimal transmission of the magnetic flux onto the magnetic surface.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.46 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Retaining magnets female thread, rubber jacket

  GANTER

  [Specifications]
  ・Material: ND. NdFeB
  
  The retaining magnets with rubber jacket GN 51.2 form a system together with the steel part that shields and strengthens the magnet, optimally concentrating the magnetic flux on the rubberized magnetic surface.The rubber protects sensitive surfaces from being damaged by the magnet and also delivers a high friction coefficient, resulting in high lateral displacement forces.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.38 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

Loading...