KIPP Clamping Levers（Page 5）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Adjustable handles, die-cast zinc with internal thread, threaded insert stainless steel (K0117 inch)
KIPP
Material:
Handle die-cast zinc DIN EN 12844.
Steel parts stainless steel 1.4305 (AISI 303 equivalent).
Version:
Handle powder-coated.
Stainless steel parts bright.
Note:
Standard colors are:
black satin finish, silver metallic.
On request:
Other threads, colors and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 10.47 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, die-cast zinc with internal thread, threaded insert stainless steel (K0123 inch)
KIPP
Material:
Handle die-cast zinc DIN EN 12844.
Steel parts stainless steel 1.4305 (AISI 303 equivalent).
Version:
Handle, powder-coated.
Steel parts bright.
Note:
Standard colors are:
orange RAL 2004, ruby red RAL 3003, silver metallic.
On request:
Other internal threads, colors and special versions.
Dimension “H1” can be produced in other lengths at an additional charge.Starting from∗ ： 9.37 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, die-cast zinc, flat with external thread, threaded pin black oxidised steel, satin/textured matt finish (K0737 inch)
KIPP
Material:
Handle die-cast zinc DIN EN 12844.
Steel parts grade 5.8.
Version:
Handle powder-coated.
Steel parts black oxidised.
Order information:
Threaded studs with dimension L=70 mm or greater are partially threaded, 60 mm.
Note:
Where L ≥ 60 mm the thread length is always 60 mm.
On request:
Other threads, screw lengths, colors and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 9.50 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, die-cast zinc, flat with external thread, threaded pin black oxidised steel, powder coated finish (K0737 inch)
KIPP
Material:
Handle die-cast zinc DIN EN 12844.
Steel parts grade 5.8.
Version:
Handle powder-coated.
Steel parts black oxidised.
Note:
Standard colors are:
orange RAL 2004.
Where L is ≥ 60 mm the thread length is 60 mm.
On request:
Other threads, screw lengths, colors and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 9.50 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, die-cast zinc, flat with external thread, threaded pin stainless steel, powder coated finish (K0738 inch)
KIPP
Material:
Handle die-cast zinc DIN EN 12844.
Steel parts stainless steel 1.4305 (AISI 303 equivalent).
Version:
Handle powder-coated.
Stainless steel parts bright.
Note:
Standard colors are:
orange RAL 2004.
Where L is ≥ 60 mm the thread length is 60 mm.
On request:
Other threads, screw lengths, colors and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 13.36 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, die-cast zinc, flat with external thread, threaded pin stainless steel, satin/textured matt finish (K0738 inch)
KIPP
Material:
Handle die-cast zinc DIN EN 12844.
Steel parts grade 5.8.
Version:
Handle powder-coated.
Steel parts black oxidised.
Note:
Where L ≥ 60 mm the thread length is always 60 mm.
On request:
Other threads, screw lengths, colors and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 13.36 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, die-cast zinc, flat with internal thread, threaded insert black oxidised steel, powder coated finish (K0737 inch)
KIPP
Material:
Handle die-cast zinc DIN EN 12844.
Steel parts grade 5.8.
Version:
Handle powder-coated.
Steel parts black oxidised.
Note:
Standard colors are:
orange RAL 2004.
On request:
Other threads, colors and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 8.92 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, die-cast zinc, flat with internal thread, threaded insert black oxidised steel, satin/textured matt finish (K0737 inch)
KIPP
Material:
Handle die-cast zinc DIN EN 12844.
Steel parts grade 5.8.
Version:
Handle powder-coated.
Steel parts black oxidised.
On request:
Other threads, colors and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 8.92 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, steel with internal thread, satin finish (K0752 SE inch)
KIPP
Material:
Handle steel 1.0401.
All other steel parts grade 5.8.
Version:
Handle powder-coated.
Steel parts black oxidised.Starting from∗ ： 10.50 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, die-cast zinc, flat with internal thread, threaded insert stainless steel, powder coated finish (K0738 inch)
KIPP
Material:
Handle die-cast zinc DIN EN 12844.
Steel parts stainless steel 1.4305 (AISI 303 equivalent).
Version:
Handle powder-coated.
Stainless steel parts bright.
Note:
Standard colors are:
orange RAL 2004.
On request:
Other threads, colors and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 12.66 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, die-cast zinc, flat with internal thread, threaded insert stainless steel, satin/textured matt finish (K0738 inch)
KIPP
Material:
Handle die-cast zinc DIN EN 12844.
Steel parts stainless steel 1.4305 (AISI 303 equivalent).
Version:
Handle powder-coated.
Stainless steel parts bright.
On request:
Other threads, colors and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 12.66 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, plastic with external thread and push button, threaded insert black oxidised steel (K0269 inch)
KIPP
Material:
Handle fiberglass reinforced plastic, toothed ring die-cast zinc.
Steel parts grade 5.8.
Push button plastic (POM).
Version:
Steel parts black oxidised.
Order information:
Threaded studs with dimension L=70 mm or greater are partially threaded, 60 mm.
Note:
The standard colors are:
Black gray handle, traffic red push button.
Orange handle, black gray push button.
Traffic red handle, black gray push button.
Where L ≥ 60 mm the thread length is 60 mm.
On request:
Other threads, screw lengths and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 5.24 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, plastic with external thread and push button, threaded insert stainless steel (K0270 inch)
KIPP
Material:
Handle fiberglass reinforced plastic, toothed ring die-cast zinc.
Metal parts stainless steel 1.4305 (AISI 303 equivalent).
Push button plastic (POM).
Version:
Steel parts bright.
Note:
The standard colors are:
Black gray handle, traffic red push button.
Orange handle, black gray push button.
Traffic red handle, black gray push button.
Where L ≥ 60 mm the thread length is 60 mm.
On request:
Other threads, screw lengths and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 8.36 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, plastic with external thread, threaded insert black oxidised steel (K0269 inch)
KIPP
Material:
Handle fiberglass reinforced plastic with die-cast zinc toothed ring.
Steel parts grade 5.8.
Version:
Steel parts black oxidised.
On request:
Other threads, screw lengths and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 5.24 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, plastic with external thread, threaded insert black oxidised steel (K1700 inch)
KIPP
Product description:
The plastic adjustable handle with ergonomic grip design offers a high-quality, modern appearance in combination with very pleasant haptics.
The adjustable handle is made of a special high-performance plastic and is available in many standard colors.
The advantages of the adjustable handle are high rigidity and strength. The light weight make it ideal for mobile applications.
Material:
High performance fiberglass reinforced thermoplastic.
Steel parts grade 5.8.
Version:
Steel parts black oxidised.
Note:
Where L ≥ 60 mm the thread length is always 60 mm.
Type of operation:
When not actuated, the handle is engaged in the tooth insert by a gear ring, thus allowing the thread to be fastened or released. When raised, the handle can be re-positioned and then re-engaged in the gear ring by spring force.
Application:
Machine, equipment and plant construction, rehabilitation sector.
Temperature range:
Permanent temperature max. 100 °C.
Brief use with temperatures up to 130 °C.
Benefits:
Seven color variants.
On request:
Other screw sizes, screw lengths and special versions.
Length “H1” optionally available in other lengths for an additional charge.
High temperature black-gray plastic.
Permanent operating temperature acc. to IEC 216 150 °C - 160 °C max.
Brief use with temperatures up to 250 °C.Starting from∗ ： 4.99 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, plastic with external thread, threaded insert stainless steel (K0270 inch)
KIPP
Material:
Handle fiberglass reinforced plastic with die-cast zinc toothed ring.
Steel parts stainless steel 1.4305 (AISI 303 equivalent).
Version:
Steel parts bright.
Order information:
Threaded studs with dimension L=70 mm or greater are partially threaded, 60 mm.
On request:
Other threads, screw lengths and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 8.36 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, plastic with external thread, threaded insert stainless steel (K1701 inch)
KIPP
Product description:
The plastic adjustable handle with ergonomic grip design offers a high-quality, modern appearance in combination with very pleasant haptics.
The adjustable handle is made of a special high-performance plastic and is available in many standard colors.
The advantages of the adjustable handle are high rigidity and strength. The light weight make it ideal for mobile applications.
It offers good chemical and corrosion resistance.
Material:
High performance fiberglass reinforced thermoplastic.
Steel parts stainless steel 1.4305 (AISI 303 equivalent).
Version:
Steel parts bright.
Note:
Where L ≥ 60 mm the thread length is always 60 mm.
Type of operation:
When not actuated, the handle is engaged in the tooth insert by a gear ring, thus allowing the thread to be fastened or released. When raised, the handle can be re-positioned and then re-engaged in the gear ring by spring force.
Application:
Machine, equipment and systems engineering, rehab applications, medical technology, food processing industry.
Temperature range:
Permanent temperature max. 100 °C.
Brief use with temperatures up to 130 °C.
Benefits:
Good chemical and corrosion resistance.
Seven color variants.
On request:
Other screw sizes, screw lengths and special versions.
Length “H1” optionally available in other lengths for an additional charge.
High temperature black-gray plastic.
Permanent operating temperature acc. to IEC 216 150 °C - 160 °C max.
Brief use with temperatures up to 250 °C.Starting from∗ ： 7.95 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, plastic with internal thread and push button, threaded insert black oxidised steel (K0269 inch)
KIPP
Material:
Handle fiberglass reinforced plastic, toothed ring die-cast zinc.
Steel parts grade 5.8.
Push button plastic (POM).
Version:
Steel parts black oxidised.
Note:
The standard colors are:
Black gray handle, traffic red push button.
Orange handle, black gray push button.
Traffic red handle, black gray push button.
On request:
Other threads and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 4.80 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, plastic with internal thread and push button, threaded insert stainless steel (K0270 inch)
KIPP
Material:
Handle fiberglass reinforced plastic, toothed ring die-cast zinc.
Metal parts stainless steel 1.4305 (AISI 303 equivalent).
Push button plastic (POM).
Version:
Steel parts bright.
Note:
The standard colors are:
Black gray handle, traffic red push button.
Orange handle, black gray push button.
Traffic red handle, black gray push button.
On request:
Other threads and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 7.77 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, plastic with internal thread, threaded insert black oxidised steel (K0269 inch)
KIPP
Material:
Handle fiberglass reinforced plastic with die-cast zinc toothed ring.
Steel parts grade 5.8.
Version:
Steel parts black oxidised.
On request:
Other threads and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 4.80 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, plastic with internal thread, threaded insert black oxidised steel (K1700 inch)
KIPP
Product description:
The plastic adjustable handle with ergonomic grip design offers a high-quality, modern appearance in combination with very pleasant haptics.
The adjustable handle is made of a special high-performance plastic and is available in many standard colors.
The advantages of the adjustable handle are high rigidity and strength. The light weight make it ideal for mobile applications.
Material:
High performance fiberglass reinforced thermoplastic.
Steel parts grade 5.8.
Version:
Steel parts black oxidised.
Type of operation:
When not actuated, the handle is engaged in the tooth insert by a gear ring, thus allowing the thread to be fastened or released. When raised, the handle can be re-positioned and then re-engaged in the gear ring by spring force.
Application:
Machine, equipment and plant construction, rehabilitation sector.
Temperature range:
Permanent temperature max. 100 °C.
Brief use with temperatures up to 130 °C.
Benefits:
Seven color variants.
On request:
Other internal threads and special versions.
Length “H1” optionally available in other lengths for an additional charge.
High temperature black-gray plastic.
Permanent operating temperature acc. to IEC 216 150 °C - 160 °C max.
Brief use with temperatures up to 250 °C.Starting from∗ ： 4.57 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, plastic with internal thread, threaded insert stainless steel (K0270 inch)
KIPP
Material:
Handle fiberglass reinforced plastic with die-cast zinc toothed ring.
Steel parts stainless steel 1.4305 (AISI 303 equivalent).
Version:
Steel parts bright.
On request:
Other threads and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 7.77 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, plastic with internal thread, threaded insert stainless steel (K1701 inch)
KIPP
Product description:
The plastic adjustable handle with ergonomic grip design offers a high-quality, modern appearance in combination with very pleasant haptics.
The adjustable handle is made of a special high-performance plastic and is available in many standard colors.
The advantages of the adjustable handle are high rigidity and strength. The light weight make it ideal for mobile applications.
It offers good chemical and corrosion resistance.
Material:
High performance fiberglass reinforced thermoplastic.
Steel parts stainless steel 1.4305 (AISI 303 equivalent).
Version:
Steel parts bright.
Type of operation:
When not actuated, the handle is engaged in the tooth insert by a gear ring, thus allowing the thread to be fastened or released. When raised, the handle can be re-positioned and then re-engaged in the gear ring by spring force.
Application:
Machine, equipment and systems engineering, rehab applications, medical technology, food processing industry.
Temperature range:
Permanent temperature max. 100 °C.
Brief use with temperatures up to 130 °C.
Benefits:
Good chemical and corrosion resistance.
Seven color variants.
On request:
Other internal threads and special versions.
Length “H1” optionally available in other lengths for an additional charge.
High temperature black-gray plastic.
Permanent operating temperature acc. to IEC 216 150 °C - 160 °C max.
Brief use with temperatures up to 250 °C.Starting from∗ ： 7.37 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, plastic, with external thread and safety function, threaded pin blue passivated steel (K1553 inch)
KIPP
Product description:
Adjustable handles with safety function prevent changes in the locking point through accidental opening or closing.
In the default position, the handle can be freely rotated and has no connection to the clamping point. The grip handle only engages when pushed down and the clamp can be loosened or tightened.
A spring sets the handle automatically into the default position when released.
Material:
Grip lever and insert made from reinforced thermoplastic.
Threaded pin steel.
Version:
Steel trivalent blue passivated.
Benefits:
Protection against accidental opening or closing.
Closed grip contour without protruding edges.
On request:
Special versions.Starting from∗ ： 6.59 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, plastic, with internal thread and safety function, threaded insert blue passivated steel (K1553 inch)
KIPP
Product description:
Adjustable handles with safety function prevent changes in the locking point through accidental opening or closing.
In the default position, the handle can be freely rotated and has no connection to the clamping point. The grip handle only engages when pushed down and the clamp can be loosened or tightened.
A spring sets the handle automatically into the default position when released.
Material:
Grip lever and insert made from reinforced thermoplastic.
Bushing steel.
Version:
Steel trivalent blue passivated.
Benefits:
Protection against accidental opening or closing.
Closed grip contour without protruding edges.
On request:
Special versions.Starting from∗ ： 6.37 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, stainless steel with external thread and protective cap, threaded pin stainless steel (K0124 inch)
KIPP
Material:
Handle investment cast 1.4308 (AISI "316" equivalent).
Other steel parts 1.4305 (AISI 303 equivalent).
Version:
Handle electropolished.
Steel parts bright.
Order information:
Threaded studs with dimension L=70 mm or greater are partially threaded, 60 mm.
On request:
Other threads, screw lengths and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 30.79 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, stainless steel with external thread, threaded insert stainless steel (K0121 inch)
KIPP
Material:
Handle stainless steel 1.4308 (AISI "316" equivalent).
All other metal parts stainless steel 1.4305 (AISI 303 equivalent).
Version:
Stainless steel grip electropolished.
Steel parts bright.
Order information:
Threaded studs with dimension L=70 mm or greater are partially threaded, 60 mm.
On request:
Other threads, screw lengths and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 52.56 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, stainless steel with external thread, threaded insert stainless steel (K0124 inch)
KIPP
Material:
Handle investment cast 1.4308 (AISI "316" equivalent).
Other steel parts 1.4305 (AISI 303 equivalent).
Version:
Handle electropolished or blasted.
Metal parts bright.
Order information:
Threaded studs with dimension L=70 mm or greater are partially threaded, 60 mm.
On request:
Other threads, screw lengths and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 20.96 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, stainless steel with internal thread and protective cap, threaded insert stainless steel (K0124 inch)
KIPP
Material:
Handle investment cast 1.4308 (AISI "316" equivalent).
Other steel parts 1.4305 (AISI 303 equivalent).
Version:
Handle electropolished.
Steel parts bright.
On request:
Other threads and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 30.10 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, stainless steel with internal thread, threaded insert stainless steel (K0121 inch)
KIPP
Material:
Handle stainless steel 1.4308 (AISI "316" equivalent).
All other metal parts stainless steel 1.4305 (AISI 303 equivalent).
Version:
Stainless steel grip electropolished.
Steel parts bright.
On request:
Other threads and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 47.47 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, stainless steel with internal thread, threaded insert stainless steel (K0124 inch)
KIPP
Material:
Handle investment cast 1.4308 (AISI "316" equivalent).
Other steel parts 1.4305 (AISI 303 equivalent).
Version:
Handle electropolished or blasted.
Metal parts bright.
On request:
Other threads and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 20.38 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, steel with external thread, matt textured (K0752 STM inch)
KIPP
Material:
Handle steel 1.0401.
All other steel parts grade 5.8.
Version:
Handle powder-coated.
Steel parts black oxidised.
Note:
Where L ≥ 60 mm the thread length is always 60 mm.Starting from∗ ： 10.96 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, steel with external thread, satin finish (K0752 SE inch)
KIPP
Material:
Handle steel 1.0401.
All other steel parts grade 5.8.
Version:
Handle powder-coated.
Steel parts black oxidised.
Note:
Where L ≥ 60 mm the thread length is always 60 mm.Starting from∗ ： 10.96 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, steel with external thread, threaded pin black oxidised steel (K0120 inch)
KIPP
Material:
Handle steel 1.0401.
All other steel parts grade 5.8.
Version:
Handle painted silver-gray hammer-tone.
Steel parts black oxidised.
Order information:
Threaded studs with dimension L=70 mm or greater are partially threaded, 60 mm.
Note:
For other dimensions see adjustable handles with internal thread.
On request:
Other threads, screw lengths and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 26.32 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, steel with external thread, threaded pin black oxidised steel (K0752 inch)
KIPP
Material:
Handle steel 1.0401.
All other steel parts grade 5.8.
Version:
Handle powder-coated, fine-textured structure.
Steel parts black oxidised.
Note:
Standard colors are:
ruby red RAL 3003.
Where L ≥ 60 mm the thread length is always 60 mm.Starting from∗ ： 10.96 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, steel with internal thread, matt textured (K0752 STM inch)
KIPP
Material:
Handle steel 1.0401.
All other steel parts grade 5.8.
Version:
Handle powder-coated.
Steel parts black oxidised.Starting from∗ ： 10.50 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, steel with internal thread, threaded insert black oxidised steel (K0120 inch)
KIPP
Material:
Handle steel 1.0401.
All other steel parts grade 5.8.
Version:
Handle painted silver-gray hammer-tone.
Steel parts black oxidised.
On request:
Other threads and special versions.
Dimension “H1” available in other lengths at extra charge.Starting from∗ ： 25.14 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Adjustable handles, steel with internal thread, threaded insert black oxidised steel (K0752 inch)
KIPP
Material:
Handle steel 1.0401.
All other steel parts grade 5.8.
Version:
Handle powder-coated, fine-textured structure.
Steel parts black oxidised.
Note:
Standard colors are:
ruby red RAL 3003.Starting from∗ ： 10.50 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cam levers stainless steel, with internal thread, thrust washer stainless steel (K0645 inch)
KIPP
Material:
Handle 1.4308 (AISI "316" equivalent) stainless steel.
Thrust washer 1.4034 (AISI 420 equivalent) stainless steel, hardened.
Hinge pin and stud 1.4305 (AISI 303 equivalent) stainless steel.
Version:
Handle electropolished or blasted.
Thrust washer, hinge pin and screw bright.
Note:
The thrust washer face is lightly greased before delivery.
The grease is FDA constyle and is suitable for use in the foodstuff and pharmaceutical industries.Starting from∗ ： 17.05 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cam levers, aluminum with external thread, plastic thrust washer and steel or stainless steel stud (K2120 AG inch)
KIPP
Product description:
These cam levers have a technically optimised plastic thrust washer.
The thrust washer is made of a special high-performance plastic that guarantees very good wear and creep resistance.
Material:
Handle cast aluminum EN AC-46200.
Thrust washer high performance carbon-fibre reinforced thermoplastic.
Hinge pin steel, grade 5.8 or stainless steel 1.4305 (AISI 303 equivalent).
Stud steel, grade 5.8 or stainless steel 1.4305 (AISI 303 equivalent).
Version:
Lever powder-coated black fine structured or traffic red fine structured.
Thrust washer, black.
Hinge pin, stud steel, blue passivated or bright stainless steel.
Note:
Plastics are subject to creeping under load (retardation).
Accessory:
For slightly curved contact faces, a stainless steel washer K2130 can also be ordered.
This washer can be mounted between the thrust washer and the contact face.Starting from∗ ： 8.80 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cam levers, aluminum with internal thread, plastic thrust washer (K2120 IG inch)
KIPP
Product description:
These cam levers have a technically optimised plastic thrust washer.
The thrust washer is made of a special high-performance plastic that guarantees very good wear and creep resistance.
Material:
Handle cast aluminum EN AC-46200.
Thrust washer high performance carbon-fibre reinforced thermoplastic.
Hinge pin steel, grade 5.8 or stainless steel 1.4305 (AISI 303 equivalent).
Version:
Lever powder-coated black fine structured or traffic red fine structured.
Thrust washer, black.
Hinge pin steel, blue passivated or bright stainless steel.
Note:
Plastics are subject to creeping under load (retardation).
Accessory:
For slightly curved contact faces, a stainless steel washer K2130 can also be ordered.
This washer can be mounted between the thrust washer and the contact face.Starting from∗ ： 8.31 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cam levers, aluminum, adjustable with external thread, plastic thrust washer and steel or stainless steel stud (K2125 inch)
KIPP
Product description:
These cam levers have a technically optimised plastic thrust washer.
The thrust washer is made of a special high-performance plastic that guarantees very good wear and creep resistance.
Material:
Handle cast aluminum EN AC-46200.
Thrust washer high performance carbon-fibre reinforced thermoplastic.
Hinge pin steel, grade 5.8 or stainless steel 1.4305 (AISI 303 equivalent).
Stud steel, grade 5.8 or stainless steel 1.4305 (AISI 303 equivalent).
Version:
Lever powder-coated black fine structured or traffic red fine structured.
Thrust washer, black.
Hinge pin, stud steel, blue passivated or bright stainless steel.
Note:
Adjustable cam levers are used if the position of the lever relative to the axis of tension only permits one specific position (interference circle). The exact position of the lever is adjusted using a screwdriver on the fine thread setscrew.
Plastics are subject to creeping under load (retardation).Starting from∗ ： 10.73 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cam levers, plastic with external thread, plastic thrust washer and steel or stainless steel stud (K2122 AG inch)
KIPP
Product description:
These cam levers have a technically optimised plastic thrust washer.
The thrust washer is made of a special high-performance plastic that guarantees very good wear and creep resistance.
Material:
Handle and thrust washer plastic PA 66 fiberglass reinforced.
Hinge pin stainless steel 1.4305.
Stud and washer steel quality class 5.8 or stainless steel 1.4305.
Version:
Grip black or traffic red RAL3020.
Thrust washer black.
Hinge pin bright.
Stud blue passivated or bright stainless steel.
Note:
Plastics are subject to creeping under load (retardation).
Accessory:
For slightly curved contact faces, a stainless steel washer K2130 can also be ordered.
This washer can be mounted between the thrust washer and the contact face.Starting from∗ ： 7.84 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cam levers, plastic with internal thread, plastic thrust washer (K2122 IG inch)
KIPP
Product description:
These cam levers have a technically optimised plastic thrust washer.
The thrust washer is made of a special high-performance plastic that guarantees very good wear and creep resistance.
Material:
Handle and thrust washer plastic PA 66 fiberglass reinforced.
Hinge pin stainless steel 1.4305.
Stud and washer steel quality class 5.8 or stainless steel 1.4305.
Version:
Grip black or traffic red RAL3020.
Thrust washer black.
Hinge pin bright.
Note:
Plastics are subject to creeping under load (retardation).
Accessory:
For slightly curved contact faces, a stainless steel washer K2130 can also be ordered.
This washer can be mounted between the thrust washer and the contact face.Starting from∗ ： 7.30 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cam levers, plastic, adjustable with external thread, plastic thrust washer and steel or stainless steel stud (K2127 inch)
KIPP
Product description:
These cam levers have a technically optimised plastic thrust washer.
The thrust washer is made of a special high-performance plastic that guarantees very good wear and creep resistance.
Material:
Handle and thrust washer fiberglass reinforced plastic PA 66.
Hinge pin stainless steel 1.4305.
Screw and washer steel quality class 5.8 or stainless steel 1.4305.
Version:
Grip black or traffic red RAL3020.
Thrust washer black.
Hinge pin bright.
Stud blue passivated or bright stainless steel.
Note:
Adjustable cam levers are used if the position of the lever relative to the axis of tension only permits one specific position (interference circle). The exact position of the lever is adjusted using a screwdriver on the fine thread setscrew.
Plastics are subject to creeping under load (retardation).
Accessory:
For slightly curved contact faces, a stainless steel washer K2130 can also be ordered.
This washer can be mounted between the thrust washer and the contact face.Starting from∗ ： 9.38 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Application |
| Type Clamp |
| Type operation |
| Operation Direction |
| Shape |
| L-Shaped Clamp Lever Shape |
| Lever Shape with Knob |
| Mounting Section Type |
| Rotating Radius R(mm) |
| Main Body Material |
| Main Body Surface Treatment |
| Mounting Section Material |
| Mounting Section Surface Treatment |
| Knob Material |
| Surface Treatment of knob |
| Adjustment screw for gap |
| Mounting Section Diameter d(mm) and/or Diameter |
| Mounting Section Length L(mm) |
| Mounting Section Diameter C(mm) |
| Mounting Section Thickness h(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP |
| Product Series | Adjustable handles, die-cast zinc with internal thread, threaded insert stainless steel (K0117 inch) | Adjustable handles, die-cast zinc with internal thread, threaded insert stainless steel (K0123 inch) | Adjustable handles, steel with internal thread, satin finish (K0752 SE inch) | Adjustable handles, plastic with external thread, threaded insert black oxidised steel (K0269 inch) | Adjustable handles, plastic with external thread, threaded insert black oxidised steel (K1700 inch) | Adjustable handles, plastic with external thread, threaded insert stainless steel (K0270 inch) | Adjustable handles, plastic with external thread, threaded insert stainless steel (K1701 inch) | Adjustable handles, plastic with internal thread, threaded insert black oxidised steel (K0269 inch) | Adjustable handles, plastic with internal thread, threaded insert black oxidised steel (K1700 inch) | Adjustable handles, plastic with internal thread, threaded insert stainless steel (K0270 inch) | Adjustable handles, plastic with internal thread, threaded insert stainless steel (K1701 inch) | Adjustable handles, steel with external thread, matt textured (K0752 STM inch) | Adjustable handles, steel with external thread, satin finish (K0752 SE inch) | Adjustable handles, steel with external thread, threaded pin black oxidised steel (K0120 inch) | Adjustable handles, steel with external thread, threaded pin black oxidised steel (K0752 inch) | Adjustable handles, steel with internal thread, matt textured (K0752 STM inch) | Adjustable handles, steel with internal thread, threaded insert black oxidised steel (K0120 inch) | Adjustable handles, steel with internal thread, threaded insert black oxidised steel (K0752 inch) | Cam levers stainless steel, with internal thread, thrust washer stainless steel (K0645 inch) | Cam levers, aluminum with internal thread, plastic thrust washer (K2120 IG inch) | Cam levers, plastic with internal thread, plastic thrust washer (K2122 IG inch) | ||||||||||||||||||||||||
| CAD | |||||||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 10.47 € *Unit price with basic configuration | 9.37 € *Unit price with basic configuration | 9.50 € *Unit price with basic configuration | 9.50 € *Unit price with basic configuration | 13.36 € *Unit price with basic configuration | 13.36 € *Unit price with basic configuration | 8.92 € *Unit price with basic configuration | 8.92 € *Unit price with basic configuration | 10.50 € *Unit price with basic configuration | 12.66 € *Unit price with basic configuration | 12.66 € *Unit price with basic configuration | 5.24 € *Unit price with basic configuration | 8.36 € *Unit price with basic configuration | 5.24 € *Unit price with basic configuration | 4.99 € *Unit price with basic configuration | 8.36 € *Unit price with basic configuration | 7.95 € *Unit price with basic configuration | 4.80 € *Unit price with basic configuration | 7.77 € *Unit price with basic configuration | 4.80 € *Unit price with basic configuration | 4.57 € *Unit price with basic configuration | 7.77 € *Unit price with basic configuration | 7.37 € *Unit price with basic configuration | 6.59 € *Unit price with basic configuration | 6.37 € *Unit price with basic configuration | 30.79 € *Unit price with basic configuration | 52.56 € *Unit price with basic configuration | 20.96 € *Unit price with basic configuration | 30.10 € *Unit price with basic configuration | 47.47 € *Unit price with basic configuration | 20.38 € *Unit price with basic configuration | 10.96 € *Unit price with basic configuration | 10.96 € *Unit price with basic configuration | 26.32 € *Unit price with basic configuration | 10.96 € *Unit price with basic configuration | 10.50 € *Unit price with basic configuration | 25.14 € *Unit price with basic configuration | 10.50 € *Unit price with basic configuration | 17.05 € *Unit price with basic configuration | 8.80 € *Unit price with basic configuration | 8.31 € *Unit price with basic configuration | 10.73 € *Unit price with basic configuration | 7.84 € *Unit price with basic configuration | 7.30 € *Unit price with basic configuration | 9.38 € *Unit price with basic configuration |
| Min. Shipping Days ： | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type Clamp | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type operation | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Operation Direction | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| L-Shaped Clamp Lever Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Lever Shape with Knob | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Rotating Radius R(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Main Body Material | Other | Other | Other | Other | Other | Other | Other | Other | Steel | Other | Other | Other | Other | Other | Other | Other | - | Other | Other | Other | Other | Other | Other | Other | Other | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel | Aluminum | Aluminum | Aluminum | Polyamide | Polyamide | Polyamide |
| Main Body Surface Treatment | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Surface Treatment | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Knob Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Surface Treatment of knob | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Adjustment screw for gap | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Diameter d(mm) and/or Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Length L(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Diameter C(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Thickness h(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Application
- Clamp
- Operation
- Related Components
-
Type Clamp
-
Type operation
-
Operation Direction
-
Shape
-
L-Shaped Clamp Lever Shape
-
Lever Shape with Knob
-
Mounting Section Type
- Male thread
- Female Thread
- Round Hole
- Square Hole
-
Rotating Radius R(mm)
- 25
- 26
- 30
- 33.5
- 36.2
- 39
- 39.9
- 40
- 40.1
- 42
- 43
- 44
- 45
- 46.5
- 47.5
- 47.9
- 48
- 50
- 52.3
- 55
- 59.5
- 60
- 62
- 63
- 63.5
- 64
- 64.5
- 64.9
- 65
- 65.2
- 67
- 68
- 70
- 70.4
- 71.5
- 74
- 75
- 75.5
- 76
- 78
- 78.5
- 79
- 79.5
- 80
- 80.2
- 80.3
- 81
- 81.1
- 82
- 83
- 84
- 84.5
- 85
- 87
- 88
- 88.1
- 88.5
- 89
- 90
- 92
- 93
- 94.5
- 95
- 95.4
- 96
- 96.8
- 97
- 99
- 99.9
- 100
- 101
- 102
- 104
- 106
- 108
- 109
- 109.9
- 110
- 110.9
- 111
- 114
- 115
- 118
- 119
- 120
- 121
- 123
- 123.5
- 125
- 126
- 126.5
- 127
- 128
- 128.5
- 130
- 131
- 132
- 134
- 134.5
- 136
- 138
- 140
- 145
- 146
- 148
- 150
- 152
- 157
- 160
- 170
- 180
- 187.5
- 190
- 200
- 230
- 300
- 400
-
Main Body Material
-
Main Body Surface Treatment
-
Mounting Section Material
-
Mounting Section Surface Treatment
-
Knob Material
-
Surface Treatment of knob
-
Adjustment screw for gap
-
Mounting Section Diameter d(mm) and/or Diameter
-
Mounting Section Length L(mm)
-
Mounting Section Diameter C(mm)
-
Mounting Section Thickness h(mm)
Narrow search by specifying Brand
-
- MISUMI (19)
- NORELEM (287)
- KIPP (246)
- ESCO (114)
- GANTER (70)
- HALDER (46)
- KONISHI MFG (30)
- IMAO CORPORATION (25)
- NABEYA BI-TECH (21)
- ELESA (18)
- EUROFLEX (3)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Clamping Levers
-
- Telescopic Slide Rails
- Fasteners, Draw Latches
- Latch Handles, Locks, Keys
- Wires, Chains, Metal Fittings, Small Work Pieces
- Parts, Small Work Pieces
- Hooks and Shackels
- Handles
- Clamping Knobs
- Clamping Levers
- Rotation Handles, Crank Handles
- Handles / Bow handles / Cup handles / Trough handles / Carrying handles
- Hinges
-
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.