KIPP Clamping Levers（Page 6）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Cam levers, stainless steel with external thread, plastic thrust washer and stainless steel stud (K2121 AG inch)
KIPP
Product description:
These cam levers have a technically optimised plastic thrust washer.
The thrust washer is made of a special high-performance plastic that guarantees very good wear and creep resistance.
Material:
Handle stainless steel 1.4308.
Thrust washer fiberglass reinforced plastic PA 66 GF 35-X.
Hinge pin, screw and washer stainless steel 1.4305.
Version:
Handle electropolished or abrasive blasted.
Thrust washer, black.
Hinge pin and stud bright.
Note:
Plastics are subject to creeping under load (retardation).
Accessory:
For slightly curved contact faces, a stainless steel washer K2130 can also be ordered.
This washer can be mounted between the thrust washer and the contact face.Starting from∗ ： 17.61 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cam levers, stainless steel with internal thread, plastic thrust washer (K2121 IG inch)
KIPP
Product description:
These cam levers have a technically optimised plastic thrust washer.
The thrust washer is made of a special high-performance plastic that guarantees very good wear and creep resistance.
Material:
Handles 1.4308.
Thrust washer plastic PA 66 GF 35-X fibreglass reinforced.
Hinge pin, washer 1.4305.
Version:
Handle electropolished or abrasive blasted.
Thrust washer, black.
Hinge pin bright.
Note:
Plastics are subject to creeping under load (retardation).
Accessory:
For slightly curved contact faces, a stainless steel washer K2130 can also be ordered.
This washer can be mounted between the thrust washer and the contact face.Starting from∗ ： 16.24 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cam levers, stainless steel, adjustable with external thread, thrust washer and stud stainless steel (K0647 inch)
KIPP
Material:
Handle 1.4308 (AISI "316" equivalent) stainless steel.
Thrust washer 1.4034 (AISI 420 equivalent) stainless steel, hardened.
Hinge pin and stud 1.4305 (AISI 303 equivalent) stainless steel.
Version:
Handle electropolished or blasted.
Thrust washer, hinge pin and screw bright.
Note:
Adjustable cam levers are used when the position of the adjustable handle relative to the clamping axis permits only one specific position (swing circle interference).
The exact position of the adjustable handle is adjusted with a screwdriver via the fine thread on the stud.
The thrust washer face is lightly greased before delivery.
The grease is FDA constyle and is suitable for use in the foodstuff and pharmaceutical industries.Starting from∗ ： 24.07 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cam levers, stainless steel, adjustable with external thread, plastic thrust washer and stainless steel stud (K2126 inch)
KIPP
Product description:
These cam levers have a technically optimised plastic thrust washer.
The thrust washer is made of a special high-performance plastic that guarantees very good wear and creep resistance.
Material:
Handle stainless steel 1.4308 (AISI "316" equivalent).
Thrust washer high performance carbon-fibre reinforced thermoplastic.
Hinge pin and stud stainless steel 1.4305 (AISI 303 equivalent).
Version:
Handle electropolished or abrasive blasted.
Thrust washer, black.
Hinge pin and stud bright.
Note:
Adjustable cam levers are used if the position of the lever relative to the axis of tension only permits one specific position (interference circle). The exact position of the lever is adjusted using a screwdriver on the fine thread setscrew.
Plastics are subject to creeping under load (retardation).
Accessory:
For slightly curved contact faces, a stainless steel washer K2130 can also be ordered.
This washer can be mounted between the thrust washer and the contact face.Starting from∗ ： 22.90 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cam levers, steel with external thread, plastic thrust washer and steel stud (K2123 AG inch)
KIPP
Product description:
These cam levers have a technically optimised plastic thrust washer.
The thrust washer is made of a special high-performance plastic that guarantees very good wear and creep resistance.
Material:
Handle steel 1.0401.
Thrust washer high performance, carbon-fibre reinforced thermoplastic.
Hinge pin stainless steel 1.4305 (AISI 303 equivalent).
Stud steel, grade 5.8.
Version:
Handle and stud blue passivated.
Thrust washer, black.
Hinge pin bright.
Note:
Plastics are subject to creeping under load (retardation).
Accessory:
For slightly curved contact faces, a stainless steel washer K2130 can also be ordered.
This washer can be mounted between the thrust washer and the contact face.Starting from∗ ： 14.12 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cam levers, steel with internal thread, plastic thrust washer (K2123 IG inch)
KIPP
Product description:
These cam levers have a technically optimised plastic thrust washer.
The thrust washer is made of a special high-performance plastic that guarantees very good wear and creep resistance.
Material:
Handle steel 1.0401.
Thrust washer high performance plastic, carbon-fibre reinforced thermoplastic.
Hinge pin stainless steel 1.4305 (AISI 303 equivalent).
Version:
Handle blue passivated.
Thrust washer, black.
Hinge pin bright.
Note:
Plastics are subject to creeping under load (retardation).
Accessory:
For slightly curved contact faces, a stainless steel washer K2130 can also be ordered.
This washer can be mounted between the thrust washer and the contact face.Starting from∗ ： 11.81 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cam levers, steel, adjustable with external thread, plastic thrust washer and steel stud (K2128 inch)
KIPP
Product description:
These cam levers have a technically optimised plastic thrust washer.
The thrust washer is made of a special high-performance plastic that guarantees very good wear and creep resistance.
Material:
Handle steel 1.0401.
Thrust washer high performance, carbon-fibre reinforced thermoplastic.
Hinge pin stainless steel 1.4305 (AISI 303 equivalent).
Stud steel, grade 5.8.
Version:
Handle and stud blue passivated.
Thrust washer, black.
Hinge pin bright.
Note:
Adjustable cam levers are used if the position of the lever relative to the axis of tension only permits one specific position (interference circle). The exact position of the lever is adjusted using a screwdriver on the fine thread setscrew.
Plastics are subject to creeping under load (retardation).
Accessory:
For slightly curved contact faces, a stainless steel washer K2130 can also be ordered.
This washer can be mounted between the thrust washer and the contact face.Starting from∗ ： 17.45 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Clamping levers external thread, steel parts stainless steel, high-gloss chromed (K0123 HV inch)
KIPP
Material:
Handle die-cast zinc DIN EN 12844.
Steel parts stainless steel 1.4305 (AISI 303 equivalent).
Version:
Handle high-gloss chromed.
Steel parts bright.
On request:
Other external threads, screw lengths, colors and special versions.
Dimension “H1” can be produced in other lengths at an additional charge.Starting from∗ ： 12.88 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Clamping levers internal thread, steel parts stainless steel, high-gloss chromed (K0123 HV inch)
KIPP
Material:
Handle die-cast zinc DIN EN 12844.
Steel parts stainless steel 1.4305 (AISI 303 equivalent).
Version:
Handle high-gloss chromed.
Steel parts bright.
On request:
Other internal threads, colors and special versions.
Dimension “H1” can be produced in other lengths at an additional charge.Starting from∗ ： 12.21 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Tension levers flat, internal thread, 15° (K0114 15 inch)
KIPP
Material:
Steel parts grade 5.8.
Ball knob black plastic.
Version:
Black oxidised.
On request:
Other threads and special versions.
Dimensions “H1” and “A” available in other lengths at extra charge.Starting from∗ ： 23.22 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Tension levers flat, with internal thread, 0° (K0114 0 inch)
KIPP
Material:
Steel parts grade 5.8.
Ball knob black plastic.
Version:
Black oxidised.
On request:
Other threads and special versions.
Dimensions “H1” and “A” available in other lengths at extra charge.Starting from∗ ： 20.64 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Tension Levers in stainless steel with external thread, 0 degrees (K0109 0 inch)
KIPP
Material:
Steel parts stainless steel 1.4305 (AISI 303 equivalent).
Ball knob black plastic.
Version:
Stainless steel parts bright.
Ball knob polished.
Order information:
Threaded studs with dimension L=70 mm or greater are partially threaded, 60 mm.
On request:
Other threads, screw lengths and special versions.
Dimensions “H1” and “A” available in other lengths at extra charge.Starting from∗ ： 38.13 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Tension Levers in stainless steel with internal thread, 0 degrees (K0109 0 inch)
KIPP
Material:
Steel parts stainless steel 1.4305 (AISI 303 equivalent).
Ball knob black plastic.
Version:
Stainless steel parts bright.
Ball knob polished.
On request:
Other internal threads and special versions.
Dimensions “H1” and “A” available in other lengths at extra charge.Starting from∗ ： 35.51 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Tension levers stainless steel with external thread, 20° (K0109 20 inch)
KIPP
Material:
Steel parts stainless steel 1.4305 (AISI 303 equivalent).
Ball knob black plastic.
Version:
Stainless steel parts bright.
Ball knob polished.
Order information:
Threaded studs with dimension L=70 mm or greater are partially threaded, 60 mm.
On request:
Other threads, screw lengths and special versions.
Dimensions “H1” and “A” available in other lengths at extra charge.Starting from∗ ： 38.13 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Tension levers stainless steel with internal thread, 20° (K0109 20 inch)
KIPP
Material:
Steel parts stainless steel 1.4305 (AISI 303 equivalent).
Ball knob black plastic.
Version:
Stainless steel parts bright.
Ball knob polished.
On request:
Other internal threads and special versions.
Dimensions “H1” and “A” available in other lengths at extra charge.Starting from∗ ： 35.51 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Tension levers with external thread, 0 degrees (K0108 0 inch)
KIPP
Material:
Steel parts grade 5.8.
Ball knob black plastic.
Version:
Powder-coated with fine texture, black.
Order information:
Threaded studs with dimension L=70 mm or greater are partially threaded, 60 mm.
On request:
Other threads, screw lengths and special versions.
Dimensions “H1” and “A” available in other lengths at extra charge.Starting from∗ ： 21.25 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Tension levers with external thread, 20 degrees (K0108 20 inch)
KIPP
Material:
Steel parts grade 5.8.
Ball knob black plastic.
Version:
Powder-coated with fine texture, black.
Order information:
Threaded studs with dimension L=70 mm or greater are partially threaded, 60 mm.
On request:
Other threads, screw lengths and special versions.
Dimensions “H1” and “A” available in other lengths at extra charge.Starting from∗ ： 21.25 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Tension levers with internal thread, 0 degrees (K0108 0 inch)
KIPP
Material:
Steel parts grade 5.8.
Ball knob black plastic.
Version:
Powder-coated with fine texture, black.
On request:
Other threads and special versions.
Dimensions “H1” and “A” available in other lengths at extra charge.Starting from∗ ： 19.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Tension levers with internal thread, 20 degrees (K0108 20 inch)
KIPP
Material:
Steel parts grade 5.8.
Ball knob black plastic.
Version:
Powder-coated with fine texture, black.
On request:
Other threads and special versions.
Dimensions “H1” and “A” available in other lengths at extra charge.Starting from∗ ： 19.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Tension levers, flat, external thread, 0° (K0114 0 inch)
KIPP
Material:
Steel parts grade 5.8.
Ball knob black plastic.
Version:
Black oxidised.
On request:
Other threads, screw lengths and special versions.
Dimensions “H1” and “A” available in other lengths at extra charge.Starting from∗ ： 21.56 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Tension levers, flat, external thread, 15° (K0114 15 inch)
KIPP
Material:
Steel parts grade 5.8.
Ball knob black plastic.
Version:
Black oxidised.
On request:
Other threads, screw lengths and special versions.
Dimensions “H1” and “A” available in other lengths at extra charge.Starting from∗ ： 24.09 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Application |
| Type Clamp |
| Type operation |
| Operation Direction |
| Shape |
| L-Shaped Clamp Lever Shape |
| Lever Shape with Knob |
| Mounting Section Type |
| Rotating Radius R(mm) |
| Main Body Material |
| Main Body Surface Treatment |
| Mounting Section Material |
| Mounting Section Surface Treatment |
| Knob Material |
| Surface Treatment of knob |
| Adjustment screw for gap |
| Mounting Section Diameter d(mm) and/or Diameter |
| Mounting Section Length L(mm) |
| Mounting Section Diameter C(mm) |
| Mounting Section Thickness h(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP |
| Product Series | Cam levers, stainless steel with internal thread, plastic thrust washer (K2121 IG inch) | Cam levers, steel with external thread, plastic thrust washer and steel stud (K2123 AG inch) | Cam levers, steel with internal thread, plastic thrust washer (K2123 IG inch) | Clamping levers external thread, steel parts stainless steel, high-gloss chromed (K0123 HV inch) | Clamping levers internal thread, steel parts stainless steel, high-gloss chromed (K0123 HV inch) | Tension levers flat, with internal thread, 0° (K0114 0 inch) | Tension Levers in stainless steel with external thread, 0 degrees (K0109 0 inch) | Tension Levers in stainless steel with internal thread, 0 degrees (K0109 0 inch) | Tension levers stainless steel with external thread, 20° (K0109 20 inch) | Tension levers stainless steel with internal thread, 20° (K0109 20 inch) | Tension levers with external thread, 0 degrees (K0108 0 inch) | Tension levers with external thread, 20 degrees (K0108 20 inch) | Tension levers with internal thread, 0 degrees (K0108 0 inch) | Tension levers with internal thread, 20 degrees (K0108 20 inch) | |||||||
| CAD | |||||||||||||||||||||
| Starting from∗ | 17.61 € *Unit price with basic configuration | 16.24 € *Unit price with basic configuration | 24.07 € *Unit price with basic configuration | 22.90 € *Unit price with basic configuration | 14.12 € *Unit price with basic configuration | 11.81 € *Unit price with basic configuration | 17.45 € *Unit price with basic configuration | 12.88 € *Unit price with basic configuration | 12.21 € *Unit price with basic configuration | 23.22 € *Unit price with basic configuration | 20.64 € *Unit price with basic configuration | 38.13 € *Unit price with basic configuration | 35.51 € *Unit price with basic configuration | 38.13 € *Unit price with basic configuration | 35.51 € *Unit price with basic configuration | 21.25 € *Unit price with basic configuration | 21.25 € *Unit price with basic configuration | 19.39 € *Unit price with basic configuration | 19.39 € *Unit price with basic configuration | 21.56 € *Unit price with basic configuration | 24.09 € *Unit price with basic configuration |
| Min. Shipping Days ： | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type Clamp | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type operation | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Operation Direction | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| L-Shaped Clamp Lever Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Lever Shape with Knob | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Rotating Radius R(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Main Body Material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Steel | Steel | Steel | Other | Other | Steel | Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Main Body Surface Treatment | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Surface Treatment | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Knob Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Surface Treatment of knob | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Adjustment screw for gap | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Diameter d(mm) and/or Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Length L(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Diameter C(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Thickness h(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Application
- Clamp
- Operation
- Related Components
-
Type Clamp
-
Type operation
-
Operation Direction
-
Shape
-
L-Shaped Clamp Lever Shape
-
Lever Shape with Knob
-
Mounting Section Type
- Male thread
- Female Thread
- Round Hole
- Square Hole
-
Rotating Radius R(mm)
- 25
- 26
- 30
- 33.5
- 36.2
- 39
- 39.9
- 40
- 40.1
- 42
- 43
- 44
- 45
- 46.5
- 47.5
- 47.9
- 48
- 50
- 52.3
- 55
- 59.5
- 60
- 62
- 63
- 63.5
- 64
- 64.5
- 64.9
- 65
- 65.2
- 67
- 68
- 70
- 70.4
- 71.5
- 74
- 75
- 75.5
- 76
- 78
- 78.5
- 79
- 79.5
- 80
- 80.2
- 80.3
- 81
- 81.1
- 82
- 83
- 84
- 84.5
- 85
- 87
- 88
- 88.1
- 88.5
- 89
- 90
- 92
- 93
- 94.5
- 95
- 95.4
- 96
- 96.8
- 97
- 99
- 99.9
- 100
- 101
- 102
- 104
- 106
- 108
- 109
- 109.9
- 110
- 110.9
- 111
- 114
- 115
- 118
- 119
- 120
- 121
- 123
- 123.5
- 125
- 126
- 126.5
- 127
- 128
- 128.5
- 130
- 131
- 132
- 134
- 134.5
- 136
- 138
- 140
- 145
- 146
- 148
- 150
- 152
- 157
- 160
- 170
- 180
- 187.5
- 190
- 200
- 230
- 300
- 400
-
Main Body Material
-
Main Body Surface Treatment
-
Mounting Section Material
-
Mounting Section Surface Treatment
-
Knob Material
-
Surface Treatment of knob
-
Adjustment screw for gap
-
Mounting Section Diameter d(mm) and/or Diameter
-
Mounting Section Length L(mm)
-
Mounting Section Diameter C(mm)
-
Mounting Section Thickness h(mm)
Narrow search by specifying Brand
-
- MISUMI (19)
- NORELEM (287)
- KIPP (246)
- ESCO (114)
- GANTER (70)
- HALDER (46)
- KONISHI MFG (30)
- IMAO CORPORATION (25)
- NABEYA BI-TECH (21)
- ELESA (18)
- EUROFLEX (3)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Clamping Levers
-
- Telescopic Slide Rails
- Fasteners, Draw Latches
- Latch Handles, Locks, Keys
- Wires, Chains, Metal Fittings, Small Work Pieces
- Parts, Small Work Pieces
- Hooks and Shackels
- Handles
- Clamping Knobs
- Clamping Levers
- Rotation Handles, Crank Handles
- Handles / Bow handles / Cup handles / Trough handles / Carrying handles
- Hinges
-
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.