Keyless Bushing (Fastening Fittings)（Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Mechanical Lock MR Thin Type
ISEL
Using thin-type keyless bushing (fastening fitting), the outer diameter can be reduced.
[Features]
· Ideal for when a thin-wall hub design is desired.
· The outer diameter of the hub can be reduced by making the wall thinner.
· Can be used for overall short length hubs.
· Installation time is reduced by reducing the number of bolts.
· With short surface pressure section, the product is ideal for reducing the width of the hub.
[Applications]
· Ideal for mounting on power transmission devices (pulleys, etc.) that especially have a folding mechanism, such as machine tools and transfer devices.
· Can be used for overall short length hubs.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 46.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Mechanical Lock MSA Rust-proof Standard Stainless Steel Specifications
ISEL
Centering function suppresses outer circumference and terminal surface run-out. Stainless steel specifications.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 88.33 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
KanaLock (Cost-Effective Product) Model KPL200
KATAYAMA CHAIN
KPL200 is a dedicated KanaLock for shafts and bosses that require substantial transmission torque. Easy mounting. Applicable shaft diameter 19 mm to 70 mm.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 19.79 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Keyless Bushing, Standard Type (with Centering Function)
CAP
Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. CAPT This company is developing domestic and foreign high-quality and inexpensive keyless bushing and sprockets. We are adopting not only more Chinese but also Japanese manufacturers.- 2D CAD data available
Configure nowStarting from∗ ： 12.70 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Keyless Bushing A.P.LOCK SAPL-C Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface. (Most compact design A.P. Lock)
· Suitable for short hubs.
· Internal ring mounts to the terminal face, preventing the hub from moving when connected.
· Choose from stainless steel or electroless nickel plated products to suit the use environment.- 2D CAD data available
Configure nowStarting from∗ ： 29.24 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushing A.P.LOCK SAPL-CK Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface. (Most compact design A.P. Lock)
· Suitable for short hubs.
· Internal ring mounts to the terminal face, preventing the hub from moving when connected.
· Choose from stainless steel or electroless nickel plated products to suit the use environment.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 35.43 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Tapered Clamping Bush 1615 with Metric Drill
CONCAR
[Specifications]
・Type: 1615
・Body Material: Cast Iron
・Standard: DIN 6885 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 9.08 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Tapered Clamping Bush 3020 with Inch Drill
CONCAR
[Specifications]
・Type: 3020
・Body Material: Cast Iron
・Standard: British Standard BS 46 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 34.54 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Tapered Clamping Bush 3020 with Metric Drill
CONCAR
[Specifications]
・Type: 3020
・Body Material: Cast Iron
・Standard: DIN 6885 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 18.54 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Locking Assemblies 7012
RINGFEDER
Clamping set with a narrow design. Particularly suitable for tight installation conditions and coarser tolerance fluctuations with high power reserves.- 3D CAD data available
Configure nowStarting from∗ ： 61.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Locking Assemblies 7085
RINGFEDER
Clamping set made of steel with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has excellent concentricity and concentricity. The clamping set is additionally nickel-plated.- 3D CAD data available
Configure nowStarting from∗ ： 48.50 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Locking Assemblies COM-A
MAEDLER
Material: Steel.
• For fixing a hub (e.g. V-belt pulley or similar) on a shaft.
• For medium high torques.
• Not self-centering.
• Self-releasing at dismounting.
• No axial movement during mounting.- Volume Discount
Configure nowStarting from∗ ： 16.09 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-CB1
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium high torques.
• Self-centering.
• Self-locking.
• Axial movement during mounting.- Volume Discount
Configure nowStarting from∗ ： 12.31 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-L
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For very high torques.
• Self-centering.
• Slight axial offset possible during assembly.
Concentricity: 0.02 to 0.04 mm.
* When using in a stepped bore, the clearance C is to be foreseen for demounting.- Volume Discount
Configure nowStarting from∗ ： 30.00 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-LL
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For very high torques.
• Self-centering.
• Self-locking.
• Axial movement during mounting.- Volume Discount
Configure nowStarting from∗ ： 32.52 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-LLH
MAEDLER
Material: Steel.
• For fixing a hub (e.g. sprocket or similar) on a shaft.
• For very high torques.
• Very good distribution of pressure.
• High resistant against bending forces.
• Self-centering.
• Self-locking.
• No axial movement during mounting.- Volume Discount
Configure nowStarting from∗ ： 54.08 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Taper Bushes 2517
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Configure nowStarting from∗ ： 17.42 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Welding Hubs for Taper Bushes
MAEDLER
Material: Steel (St52 or comparable), good weldable.
Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft.
Taper bush and chain plate wheel have to be ordered separately.
Recommended bore tolerance: H8.
Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat.- Volume Discount
Configure nowStarting from∗ ： 11.88 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shrink discs Form A (23380)
NORELEM
· To connect a hollow shaft to a shaft
· Suitable for static, dynamic and shock loads
· For very high torques
· No shift of axial shaft/hub during assembly
· Self-centringConfigure nowStarting from∗ ： 28.52 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing
Mecha-Lock MT, General Purpose Type
ISEL
No drag when connecting for easy removal- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 39.04 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
KanaLock (Cost-Effective Product) Model KPL300
KATAYAMA CHAIN
[Features]
· For model KPL300, mounting space has been extremely reduced in a radial direction, embedding of up to 4 KanaLocks can be selected.
· This facilitates great torque transmission.
· Boss hole and shaft hole fitting is up to H8/h8- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 5.43 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushing, Self-Aligning Type SDS
Save & Secure
Self-centering type of keyless bushing. Abundant variations to choose from, with allowable torque from 6.2 to 13000N·m. The SS company manufactures a 20% share of the couplings in Taiwan. The company's are centered on China and Southeast Asia, and is trying to expand both its domestic and foreign shares.- Volume Discount
- 3D CAD data available
Configure nowStarting from∗ ： 24.33 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Keyless Bushing A.P.LOCK SAPL-AS Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
· Internal diameters 4.5ø to 40ø standardized.
· Has simple structure for easy assembly.
· Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment- 2D CAD data available
Configure nowStarting from∗ ： 67.20 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
Keyless Bushing A.P.LOCK SAPL-CS Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface. (Most compact design A.P. Lock)
· Suitable for short hubs.
· Internal ring mounts to the terminal face, preventing the hub from moving when connected.
· Choose from stainless steel or electroless nickel plated products to suit the use environment.- 2D CAD data available
Configure nowStarting from∗ ： 74.76 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tapered Clamping Bush 1210 with Metric Drill
CONCAR
[Specifications]
・Type: 1210
・Body Material: Cast Iron
・Standard: DIN 6885 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 7.26 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Tapered Clamping Bush 2012 with Metric Drill
CONCAR
[Specifications]
・Type: 2012
・Body Material: Cast Iron
・Standard: DIN 6885 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 10.54 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Tapered Clamping Bush 2517 with Inch Drill
CONCAR
[Specifications]
・Body Material: Cast Iron
・Standard: British Standard BS 46 Part 1
Tapered Clamping Bush 2517 with Inch DrillConfigure nowStarting from∗ ： 18.00 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Tapered Clamping Bush 2517 with Metric Drill
CONCAR
[Specifications]
・Type: 2517
・Body Material: Cast Iron
・Standard: DIN 6885 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 8.18 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Locking Assemblies 7015
RINGFEDER
The self-centering precision clamping set for the transmission of maximum torques or axial forces with special demands on the concentricity of the parts to be clamped, as well as for applications subject to bending moments.Large transmittable circumferential forces - the long, shallow angles of the cones allow maximum torques or axial forces to be transmitted with a RfN 7015.0 clamping set. During assembly, the clamping set, shaft and hub remain in position relative to each other, thus ensuring additional safety in relation to 3-part construction types. Shaft and hub are only pressure loaded.- 3D CAD data available
Configure nowStarting from∗ ： 590.33 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Locking Assemblies 7070
RINGFEDER
Clamping set made of steel with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has excellent concentricity and concentricity.- 3D CAD data available
Configure nowStarting from∗ ： 45.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Locking Assemblies 7110
RINGFEDER
Clamping set for hubs with low wall thickness. Ideal for aluminum hubs.- 3D CAD data available
Configure nowStarting from∗ ： 14.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Locking Assemblies Stainless Steel 7061 SST
RINGFEDER
Self-centering 2-piece Locking Assemblies for medium torques. During mounting, minor axial displacement of the hub occurs in opposite direction of the screw head. Due to the small number of screws, cost savings during mounting are ensured. For disassembly only few release screws are required. High-strength clamping screws allow a higher performance range.- 3D CAD data available
Configure nowStarting from∗ ： 6.37 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Shrink Disc 4061
RINGFEDER
Shrink disc for high torques. Compensation of smaller tolerances possible with simple assembly and disassembly.- Volume Discount
- 3D CAD data available
Configure nowStarting from∗ ： 41.82 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Shrink Disc 4161
RINGFEDER
Two-piece shrink disk for high torque stress. Easy assembly by mounting stop. Good centering and concentricity properties.- 3D CAD data available
Configure nowStarting from∗ ： 41.82 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 53.55 € Min. Shipping Days ： 1 Day *Unit price with basic configuration
-
Locking Assemblies COM-B, Stainless
MAEDLER
Material: Stainless steel 1.4401 (AISI 316).
• For fixing a hub (e.g. timing belt pulley or similar) on a shaft.
• For low torques.
• Also suitable for small hub diameters.
• Self-centering.
• Self-locking.
• No axial movement during mounting.- Volume Discount
Configure nowStarting from∗ ： 71.08 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-C
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium to high torques.
• Self-centering.
• No axial offset.
Concentricity: 0.02 to 0.04 mm.- Volume Discount
Configure nowStarting from∗ ： 20.05 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Taper Bushes 1008
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Configure nowStarting from∗ ： 5.14 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Taper Bushes 1615
MAEDLER
Material: GG25.
Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
Screws included in delivery. Thread BSW. Cone and front side ground.
Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
Other bush sizes and bores available at short notice.- Volume Discount
Configure nowStarting from∗ ： 9.73 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shrink Disks ST-R, Stainless
MAEDLER
Material: Stainless steel 1.4057 (AISI 431).
• For medium torques.
• No axial shaft-hub movement.
• Quick mounting.
• Quick demounting.
• Not self-centering.
• Concentricity 0.02-0.04 mm.- Volume Discount
Configure nowStarting from∗ ： 49.33 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies TT 17-35 mm
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For high torques.
• Self-centering.
• Axial offset during mounting (can be compensated by correct positioning).- Volume Discount
Configure nowStarting from∗ ： 40.96 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies TOK Version A
MAEDLER
Material Version A: Steel, bright.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• Axial offset during mounting (can be compensated by correct positioning).- Volume Discount
Configure nowStarting from∗ ： 12.78 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies SSG
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For low to medium torques.
• Also suitable for small hub diameters.
• Self-centering.
• Self-locking.
• Axial movement during mounting.- Volume Discount
Configure nowStarting from∗ ： 15.55 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies SIG
MAEDLER
Material: Stainless steel 1.4301 (AISI 304).
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For lower torques.
• Minimal space requirement.
• Self-centering.
• Axial movement during mounting.
• The connection can be disassembled with a puller.
Required tolerances: Shaft: h8.
Bore of the part to be clamped: H8.
Surface roughness Rz max. 12.5 μm.- Volume Discount
Configure nowStarting from∗ ： 29.84 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Clamping Bushes MSD-N
MAEDLER
Material: Stainless steel 1.4568 (17/7 PH).
The MSD-N clamping bush is identical with the MSD bush, but is made from stainless steel. It has been used in many industries for years, as, e.g., the food, medical, automotive, chemical, printing and process engineering industries.
Concentricity 0.03 - 0.06 mm.
Tolerance: Shaft h9 (Ø 15 mm only h8), Hub H7.
Temperature range: - 30 °C to + 85 °C.
PW ≈ 90N/mm², PN ≈ 70N/mm²- Volume Discount
Configure nowStarting from∗ ： 317.06 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Type |
| Centering |
| Body Material |
| Shaft Bore Dia. d(mm) |
| Allowable Torque Range(N•m) |
| Surface Treatment |
| Hub Dia. D1(mm) |
| Tightening Structure |
| Tightening Method |
| Allowable Torque(N•m) |
| Cleaning Method |
| Properties / applications |
| Environmentally Friendly |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ISEL | ISEL | KATAYAMA CHAIN | CAP | SUNGIL | SUNGIL | CONCAR | CONCAR | CONCAR | RINGFEDER | RINGFEDER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | NORELEM | ISEL | KATAYAMA CHAIN | Save & Secure | SUNGIL | SUNGIL | CONCAR | CONCAR | CONCAR | CONCAR | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | HALDER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER |
| Product Series | Mechanical Lock MSA Rust-proof Standard Stainless Steel Specifications | Tapered Shaft Hubs, without lock nut, stainless steel mm / mm | |||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||
| Starting from∗ | 46.50 € *Unit price with basic configuration | 88.33 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 19.79 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 12.70 € *Unit price with basic configuration | 29.24 € *Unit price with basic configuration | 35.43 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 9.08 € *Unit price with basic configuration | 34.54 € *Unit price with basic configuration | 18.54 € *Unit price with basic configuration | 61.87 € *Unit price with basic configuration | 48.50 € *Unit price with basic configuration | 16.09 € *Unit price with basic configuration Volume Discount | 12.31 € *Unit price with basic configuration Volume Discount | 30.00 € *Unit price with basic configuration Volume Discount | 32.52 € *Unit price with basic configuration Volume Discount | 54.08 € *Unit price with basic configuration Volume Discount | 17.42 € *Unit price with basic configuration Volume Discount | 11.88 € *Unit price with basic configuration Volume Discount | 28.52 € *Unit price with basic configuration | 39.04 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 5.43 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 24.33 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 67.20 € *Unit price with basic configuration | 74.76 € *Unit price with basic configuration | 7.26 € *Unit price with basic configuration | 10.54 € *Unit price with basic configuration | 18.00 € *Unit price with basic configuration | 8.18 € *Unit price with basic configuration | 590.33 € *Unit price with basic configuration | 45.20 € *Unit price with basic configuration | 14.00 € *Unit price with basic configuration | 6.37 € *Unit price with basic configuration | 41.82 € *Unit price with basic configuration Volume Discount | 41.82 € *Unit price with basic configuration | 53.55 € *Unit price with basic configuration | 71.08 € *Unit price with basic configuration Volume Discount | 20.05 € *Unit price with basic configuration Volume Discount | 5.14 € *Unit price with basic configuration Volume Discount | 9.73 € *Unit price with basic configuration Volume Discount | 49.33 € *Unit price with basic configuration Volume Discount | 40.96 € *Unit price with basic configuration Volume Discount | 12.78 € *Unit price with basic configuration Volume Discount | 15.55 € *Unit price with basic configuration Volume Discount | 29.84 € *Unit price with basic configuration Volume Discount | 317.06 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 6 Days | Same day | Same day | 10 Days | 11 Days | Same day | 3 Days | 3 Days | 3 Days | 5 Days | 5 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | Same day | Same day | Same day | 11 Days | 6 Days | 3 Days | 3 Days | 3 Days | 3 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 1 Day | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Type | Thin Wall | Flanged | Straight | Flanged | Thin Wall | Thin Wall | - | - | - | - | - | - | - | - | - | - | - | - | Straight | Straight | Sleeve | Flanged | Flanged | Thin Wall | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Centering | Provided | Provided | Not Provided | Provided | Provided | Provided | - | - | - | - | - | Not Provided | Provided | Provided | Provided | Provided | - | - | - | Not Provided | Not Provided | Provided | Provided | Provided | - | - | - | - | - | - | - | - | - | - | - | Provided | Provided | - | - | Not Provided | Provided | Provided | Provided | Provided | Provided |
| Body Material | Steel | Stainless Steel | Steel | Steel | Steel | Steel | Grey Iron | Grey Iron | Grey Iron | - | - | - | - | - | - | - | - | - | Steel | Steel | Steel | Steel | Stainless Steel | Stainless Steel | Grey Iron | Grey Iron | Grey Iron | Grey Iron | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shaft Bore Dia. d(mm) | 6 ～ 50 | 8 ～ 50 | 19 ～ 70 | 15 ～ 70 | 5 ～ 30 | 5 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | 14 ～ 80 | 19 ～ 70 | 10 ～ 80 | 20 | 5 ～ 40 | 5 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Torque Range(N•m) | 2.0 to 20.0 ～ 1000.1 to 3000.0 | 20.1 to 50.0 ～ 700.1 to 1000.0 | 200.1 to 300.0 ～ 3000.1 to 10000.0 | - | 2.0 to 20.0 ～ 500.1 to 700.0 | 2.0 to 20.0 ～ 500.1 to 700.0 | - | - | - | - | - | - | - | - | - | - | - | - | 2.0 to 20.0 ～ 20.1 to 50.0 | 200.1 to 300.0 ～ 3000.1 to 10000.0 | 2.0 to 20.0 ～ 1000.1 to 3000.0 | 300.1 to 500.0 | 2.0 to 20.0 ～ 300.1 to 500.0 | 2.0 to 20.0 ～ 150.1 to 200.0 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Surface Treatment | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Electroless Nickel Plating | - | - | - | - | - | - | - | - | - | - | - | - | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Hub Dia. D1(mm) | 12 ～ 65 | 21 ～ 72 | 47 ～ 110 | - | 12 ～ 41 | 12 ～ 41 | - | - | - | - | - | - | - | - | - | - | - | - | 37 ～ 145 | 47 ～ 110 | - | 47 | 16 ～ 62 | 12 ～ 41 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tightening Structure | Tapered Sleeve Type | Single Cone Type | Double Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | - | - | - | - | - | - | - | - | - | - | - | - | - | Double Cone Type | Tapered Sleeve Type | Single Cone Type | Single Cone Type | Single Cone Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tightening Method | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | - | - | - | - | - | - | - | - | - | - | - | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Torque(N•m) | 11 ～ 2120 | 10.7 ～ 754.3 | 270 ～ 5100 | 0.098 ～ 2.432 | 9 ～ 523 | 9 ～ 523 | - | - | - | - | - | - | - | - | - | - | - | - | 2.4 ～ 30 | 290 ～ 4810 | 6.9 ～ 1860 | 320 | 2.8 ～ 430.6 | 3 ～ 168 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Cleaning Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Properties / applications | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Environmentally Friendly | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
-
Centering
- Provided
- Not Provided
-
Body Material
-
Shaft Bore Dia. d(mm)
-
Allowable Torque Range(N•m)
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Clear Anodize
-
Hub Dia. D1(mm)
- 8
- 9
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 50
- 52
- 53
- 54
- 55
- 56
- 57
- 59
- 60
- 62
- 64
- 65
- 67
- 68
- 70
- 71
- 72
- 73
- 75
- 77
- 78
- 80
- 82
- 83
- 84
- 85
- 85.70
- 87
- 88
- 90
- 95
- 97
- 100
- 106
- 110
- 112
- 115
- 120
- 125
- 130
- 135
- 138
- 140
- 141
- 145
- 155
- 165
- 180
- 190
- 200
- 210
- 225
- 235
- 250
- 260
- 285
-
Tightening Structure
-
Tightening Method
-
Allowable Torque(N•m)
-
Cleaning Method
-
Properties / applications
-
Environmentally Friendly
Brand
CAD data type
-
- 2D
- 3D
Examples how you can use these components
Categories related to Keyless Bushing (Fastening Fittings)
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.