Keyless Bushing (Fastening Fittings)（Page 3）

?* Information on days to ship and prices

• 

  Clamping Bushes E-N

  MAEDLER

  Material: Stainless steel 1.405 (AISI 431).
  The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression.
  Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled.
  Concentricity: 0.02 mm.
  Tolerances: Shaft h7 for d = 15 mm.
  Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm.
  Shaft h8 for the other diameters d.
  Hub H7.
  Temperature range: -30 oC to 85 oC.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	427.52 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Bushes E

  MAEDLER

  Material: High-quality steel.
  The clamping bush consists of a double-walled steel sleeve filledwith a pressure medium, and a flange part. Inside the flange thereis a screw and a piston with seal to build up compression.
  Function: When the thrust screw is tightened, the sleeve expandsuniformly against shaft and hub, creating a rigid connectionthrough frictional force. When the thrust screw is loosened, thebush returns to its initial position and can be easily disassembled.
  Concentricity: 0.02 mm.
  Tolerances: Shaft h7 for d = 15 mm.
  Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm.
  Shaft h8 for the other diameters d.
  Hub H7.
  Temperature range: -30°C to 85°C.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	255.76 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Shrink discs Form B (23382)

  NORELEM

  · To connect a hollow shaft to a shaft
  
  · Suitable for static, dynamic and shock loads
  
  · For very high torques
  
  · No shift of axial shaft/hub during assembly
  
  · Self-centring

  Select to compare

  Configure now
  Starting from∗ ：	37.22 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Mechanical Lock, High Torque Transmission Type

  MISUMI

  By increasing the bolt size, it has excellent durability and is ideal for mechanisms that require high transmission power.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	92.13 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  [Clean & Pack]MechaLock - Compact

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  · Degreasing (Anti-rust single packing)	: Part Number SL-□□
  · Precision cleaning (Degassing double packing)	: Part Number SH-□□
  · Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Possible applications
  SL-□□	Degreasing	Anti-Rust Packing	Oil removal	General Environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision Cleaning	Degassing Double Packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000*)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing Double Packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000*)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  *US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.

  ■Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  
  

  [Features]Is provided with the Centering function and is suitable for combination use with small-sized hubs.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	81.82 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  [Clean & Pack]MechaLock - Standard

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  · Degreasing (Anti-rust single packing)	: Part Number SL-□□
  · Precision cleaning (Degassing double packing)	: Part Number SH-□□
  · Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Possible applications
  SL-□□	Degreasing	Anti-Rust Packing	Oil removal	General Environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision Cleaning	Degassing Double Packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000*)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing Double Packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000*)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  *US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.

  ■Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	88.61 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Mecha-Lock MKT, Rust-Proof General Purpose Type, Electroless Nickel Plating Specifications

  ISEL

  No drag when connecting for easy removal. Electroless nickel plated product.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	106.31 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Keyless Bushing, Centering Type SES

  Save & Secure

  Centering type of keyless bushing. Abundant variations to choose from, with allowable torque from 6.2 to 13000N·m. The SS company manufactures a 20% share of the couplings in Taiwan. The company's are centered on China and Southeast Asia, and is trying to expand both its domestic and foreign shares.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.63 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Keyless Bushing A.P.LOCK SAPL-AK Series

  SUNGIL

  [Features]
  · Self-centering function: Prevents minute Off-centering.
  · Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
  · Internal diameters 4.5ø to 40ø standardized.
  · Has simple structure for easy assembly.
  · Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.96 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Keyless Bushing A.P.LOCK SAPL-B Series

  SUNGIL

  [Features]
  · Self-centering function: Prevents minute Off-centering.
  · SAPL-A Depending on the type, the cover outer diameter and bolt size are both large, providing comparatively high durability relative to the corresponding internal diameter.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	27.26 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Keyless Bushing A.P.LOCK SAPA Series

  SUNGIL

  [Features]
  · Made from aluminum.
  Moment of inertia reduction is an important factor in controlling system performance when setting high-speed servo control positions. High-speed use at low inertia has been made possible by using an aluminum pulley that is suitable for an A.P.Lock.
  · High torque transmission power
  Uses high rigidity aluminum alloy to transmit torque, so it can be used not only with aluminum pulleys but also general steel pulleys.
  · Optimal for clean rooms
  Electroless nickel plating bolts are used standard for the aluminum main body materials, making it optimal for clean rooms.

  Select to compare

  Configure now
  Starting from∗ ：	20.88 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Keyless Bushing A.P.LOCK SAPC Series

  SUNGIL

  [Features]
  · Made from aluminum.
  Moment of inertia reduction is an important factor in controlling system performance when setting high-speed servo control positions. High-speed use at low inertia has been made possible by using an aluminum pulley that is suitable for an A.P.Lock.
  · Optimal for aluminum pulleys.
  When running a servo motor with a timing pulley, conventional friction connection units apply high pressure to the surfaces, which prevents the hub diameter from sitting properly and causes problems with slippage. The SAPC series uses servo motor torque specifications as the basis for reducing the bolt count and lowering pressure on surfaces, making it possible to connect to aluminum pulleys without difficulty.
  · Staged machining structure.
  Designed so that the push plate of the bearing could carry out its role, eliminating the need for the use of a separate bearing push plate.
  · Easy assembly and position setting.
  For conventional power locks, a space of 1 mm from there counterpart items is required to facilitate disassembly, but the SAPC series has a structure that is easy to disassemble even if there is no room for the hub to move during disassembly. Also, position setting is easy.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  SP Bushing

  EVER-ON CORPORATION

  [Features]
  ● Shaft hole machining and QA machining not required.
  ● Conforms to new JIS key specifications.
  
  [Applications]
  ● For connecting shafts to their appropriate pulleys.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	32.67 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 1108 with Inch Drill

  CONCAR

  [Specifications]
  ・Type: 1108
  ・Body Material: Cast Iron
  ・Standard: British Standard BS 46 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	10.91 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 1108 with Metric Drill

  CONCAR

  [Specifications]
  ・Type: 1108
  ・Body Material: Cast Iron
  ・Standard: DIN 6885 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	3.38 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 1210 with Inch Drill

  CONCAR

  [Specifications]
  ・Type: 1210
  ・Body Material: Cast Iron
  ・Standard: British Standard BS 46 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	14.54 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 1310 with Metric Drill

  CONCAR

  [Specifications]
  ・Type: 1310
  ・Body Material: Cast Iron
  ・Standard: DIN 6885 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	9.08 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 1610 with Inch Drill

  CONCAR

  [Specifications]
  ・Type: 1610
  ・Body Material: Cast Iron
  ・Standard: British Standard BS 46 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	17.45 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 1615 with Inch Drill

  CONCAR

  [Specifications]
  ・Type: 1615
  ・Body Material: Cast Iron
  ・Standard: British Standard BS 46 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	18.17 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 2012 with Inch Drill

  CONCAR

  [Specifications]
  ・Type: 2012
  ・Body Material: Cast Iron
  ・Standard: British Standard BS 46 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	21.45 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 3030 with Inch Drill

  CONCAR

  [Specifications]
  ・Type: 3030
  ・Body Material: Cast Iron
  ・Bore diameter(mm): 76.2
  ・Standard: British Standard BS 46 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	92.34 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 3030 with Metric Drill

  CONCAR

  [Specifications]
  ・Type: 3030
  ・Body Material: Cast Iron
  ・Standard: DIN 6885 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	25.80 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 3525 with Metric Drill

  CONCAR

  [Specifications]
  ・Type: 3525
  ・Body Material: Cast Iron
  ・Standard: DIN 6885 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	46.17 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 3535 with Inch Drill

  CONCAR

  [Specifications]
  ・Type: 3535
  ・Body Material: Cast Iron
  ・Standard: British Standard BS 46 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	87.25 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 3535 with Metric Drill

  CONCAR

  [Specifications]
  ・Type: 3535
  ・Body Material: Cast Iron
  ・Standard: DIN 6885 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	43.62 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 4040 with Metric Drill

  CONCAR

  [Specifications]
  ・Type: 4040
  ・Body Material: Cast Iron
  ・Standard: DIN 6885 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	61.43 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 4545 with Metric Drill

  CONCAR

  [Specifications]
  ・Type: 4545
  ・Body Material: Cast Iron
  ・Standard: DIN 6885 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	78.15 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 5050 with Metric Drill

  CONCAR

  [Specifications]
  ・Type: 5050
  ・Body Material: Cast Iron
  ・Standard: DIN 6885 Part 1
  
  Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.

  Select to compare

  Configure now
  Starting from∗ ：	125.06 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Locking Assemblies 7004

  RINGFEDER

  Universal clamping set for a wide range of applications. Self centering and mounting friendly at medium to high torques.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.95 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locking Assemblies 7006

  RINGFEDER

  Universal clamping set for small installation space and axial stop ring. Self-centering and easy to install for medium to high torques.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.43 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locking Assemblies 7007

  RINGFEDER

  Universal clamping set for a wide range of applications. Self centering and mounting friendly at medium to high torques. No axial displacement through stop ring.

  Select to compare

  Configure now
  Starting from∗ ：	14.23 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locking Assemblies 7075

  RINGFEDER

  Clamping set made of steel with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has excellent concentricity and concentricity.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	121.17 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locking Assemblies 7080

  RINGFEDER

  Clamping set made of steel with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has excellent concentricity and concentricity. The clamping set is additionally nickel-plated.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	80.83 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locking Assemblies 8006 SST

  RINGFEDER

  Ideally adaptable clamping element made of stainless steel for large transmission forces in a small space. Absolutely backlash-free, wear-free and maintenance-free.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.60 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Locking Assemblies Stainless Steel 7012 SST

  RINGFEDER

  Clamping set with small design made of stainless steel. Particularly suitable for tight installation conditions and coarser tolerance fluctuations with high power reserves. High-strength clamping screws allow a higher performance range.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	61.87 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locking Assemblies Stainless Steel 7013.1 SST

  RINGFEDER

  Stainless steel clamping set with excellent concentricity and very good disassembly - with these self-centering clamping sets a particularly good concentricity between the clamped parts is achieved. The flange is reinforced at the critical point, this prevents bending and lifting of the inner ring during assembly. This ensures good demountability. Ideal for high speeds, radial loads and for axial hub fixation. High-strength clamping screws allow a higher performance range.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	70.85 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locking Assemblies Stainless Steel 7090

  RINGFEDER

  Stainless clamping set with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has an excellent concentricity and concentricity.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	36.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locking Assemblies Stainless Steel 7110 SST

  RINGFEDER

  Specially small dimensioned self-centering Locking Assembly without axial displacement. As the locking screws are located out of the actual clamping area and the pressures are relatively low, the hub can be designed economically small. Through high-quality materials, the transmission of higher torques possible.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locking Elements Slotted 8006 SST

  RINGFEDER

  Ideally adaptable clamping element made of stainless steel for large transmission forces in a small space. Absolutely backlash-free, wear-free and maintenance-free. Also suitable for coarser tolerances.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.65 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Shrink Disc Stainless Steel 4061 SST

  RINGFEDER

  Shrink disc made of stainless steel for high torques. Compensation of smaller tolerances possible with simple assembly and disassembly. Due to special high-strength materials with increased performance range.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	41.82 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Tapered Shaft Hubs, lock nut, stainless steel mm / mm

  HALDER

  Select to compare

  Configure now
  Starting from∗ ：	58.36 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spare Screws for Taper Bushes

  MAEDLER

  Material: Steel.
  Supply: One screw. Order quantity as needed.
  Taper bushes have two or (from size 3525) three screws, depending on bush size. Thread BSW (Whitworth), with metric hexagon.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.72 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Adaptors for Taper Bushes

  MAEDLER

  Material: Grey Cast Iron GG25.
  Hub for fixing a sprocket or similar parts with a low priced taper bush onto a shaft. The sprocket must get a center hole Ø d_a (recommended tolerance: H8) and a special keyway. Then, the taper bush can get inserted into the adaptor and both parts can get inserted into the wheel. The taper bush, the sprocket and the key have to be ordered separately.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.07 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Bolt-on Hubs for Taper Bushes

  MAEDLER

  Material: Grey Cast Iron GG25. Product No. 14090147: from steel.
  Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	14.46 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Assemblies BAR, QPQ-Coated

  MAEDLER

  Material: Steel.
  • For fixing a hub on a shaft.
  • QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below).
  • For medium torques.
  • Self-centering.
  • Slight axial offset possible during assembly.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	28.53 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...